Measuring marginal willingness to pay using conjoint analysis and developing benefit transfer functions in various Asian cities

We need a consistent methodology to measure the co-benefits of climate change mitigation across Asian countries. This study chose a strategy of modifying the Japan-specific life-cycle impact assessment method based on endpoint modeling (LIME) for wider application across countries. LIME has two dimensions. First, it is an environmental science that links the cause-and-effect chain. Second, it is an environmental valuation that weighs four endpoint damages in monetary terms through a conjoint analysis that is derived from an Internet-based questionnaire survey. This article describes the modification of the methodology for application of the conjoint analysis to weigh environmental impacts. We approached the investigation as follows. First, we conducted Internet surveys to measure marginal willingness-to-pay (MWTP). We used a sample of 112 respondents in their 20 s to 40 s, divided equally between men and women, in 11 cities across China, India, and Southeast Asia. The results obtained showed clear statistical significance and were comparable across the cities. Second, we attempted to develop functions (called benefit transfer functions) to simplify the measured MWTP in order to apply it across different Asian countries. The functions were derived through a stepwise meta-analytic method, a type of multiple regression analysis whose independent variable was MWTP and dependent variables were attributes of both respondents and surveyed cities. The functions showed that coal consumption and percentage of nature reserve were dependent variables. Then, the MWTPs estimated from the functions were compared with the measured MWTP for transfer error, which is calculated by the absolute value of the difference between the estimated value and the measured value divided by the latter. The transfer error was below 50% in about 90% of the 44 results (a combination of four endpoints and 11 cities), implying that the developed functions were statistically significant.     

Workers select mates for queens: a possible mechanism of gene flow restriction between supercolonies of the invasive Argentine ant

Some invasive ants form large networks of mutually non-aggressive nests, i.e., supercolonies. The Argentine ant Linepithema humile forms much larger supercolonies in introduced ranges than in its native range. In both cases, it has been shown that little gene flow occurs between supercolonies of this species, though the mechanism of gene flow restriction is unknown. In this species, queens do not undertake nuptial flight, and males have to travel to foreign nests and cope with workers before gaining access to alien queens. In this study, we hypothesized that male Argentine ants receive interference from workers of alien supercolonies. To test this hypothesis, we conducted behavioral and chemical experiments using ants from two supercolonies in Japan. Workers attacked males from alien supercolonies but not those from their own supercolonies. The level of aggression against alien males was similar to that against alien workers. The frequency of severe aggression against alien males increased as the number of recipient workers increased. Cuticular hydrocarbon profiles, which serve as cues for nestmate recognition, of workers and males from the same supercolony were very similar. Workers are likely to distinguish alien males from males of their own supercolony using the profiles. It is predicted that males are subject to considerable aggression from workers when they intrude into the nests of alien supercolonies. This may be a mechanism underlying the restricted gene flow between supercolonies of Argentine ants. The Argentine ant may possess a distinctive reproductive system, where workers participate in selecting mates for their queens. We argue that the aggression of workers against alien males is a novel form of reproductive interference.     

Performance tests of newly developed adsorption/plasma combined system for decomposition of volatile organic compounds under continuous flow condition

The adsorption/plasma decomposition with the combination of adsorption honeycomb-sheets and a plasma element is a new technology for small-sized apparatuses to decompose volatile organic compounds (VOCs) at concentrations lower than about 100 ppm. The feasibility of the prototype adsorption/plasma decomposition apparatus was evaluated with the simulated exhausts containing one VOC component and with real exhausts from a painting booth and an adhesion factory. The apparatus decomposed VOCs e ectively at the painting booth exhaust but not always satisfactorily at the adhesion factory exhaust. The performance test results with real exhausts were discussed with respect to the concentration and discharge pattern of the exhausts and the basic properties of the system such as cooperation of adsorption and plasma reaction and the concentration dependence of the performance.     

Relationship between indoor and outdoor carbonaceous particulates in roadside households

Concentrations of particulate matter (PM) and carbonaceous particulates in indoor and outdoor air at roadside private households were measured in Osaka, Japan. The particulate samples were collected on filters using a portable AND sampler capable of separating particles into three different size ranges: over 10 microm, 2-10 microm (coarse) and below 2 microm (fine) in aerodynamic diameter. The filters were weighed and then analyzed for elemental carbon (EC) and organic carbon (OC) by thermal oxidation using a CHN CORDER. The results showed that indoor fine PM concentration is considerably affected by fine EC and the fine EC in indoor air is significantly correlated to that in outdoor air, r=0.86 (n=30, p<0.001). A simple estimation from EC content ratio in diesel exhaust particles indicated that about 30% of indoor particulates of less than 10 microm (PM10) were contributed from diesel exhaust. Additionally, the size characteristics of outdoor PM at roadside and background sites were examined using Andersen Cascade Impactors.     

The influence of lower extremity postures on kinematics and injuries of cyclists in vehicle side collisions

Objective: A cyclist assumes various cyclic postures of the lower extremities while pushing the pedals in a rotary motion while pedaling. In order to protect cyclists in collisions, it is necessary to understand what influence these postures have on the global kinematics and injuries of the cyclist.

Method: Finite element (FE) analyses using models of a cyclist, bicycle, and car were conducted. In the simulations, the Total Human Model of Safety (THUMS) occupant model was employed as a cyclist, and the simulation was set up such that the cyclist was hit from its side by a car. Three representative postures of the lower extremities of the cyclist were examined, and the kinematics and injury risk of the cyclist were compared to those obtained by a pedestrian FE model. The risk of a lower extremity injury was assessed based on the knee shear displacement and the tibia bending moment.

Results: When the knee position of the cyclist was higher than the hood leading edge, the hood leading edge contacted the leg of the cyclist, and the pelvis slid over the hood top and the wrap-around distance (WAD) of the cyclist's head was large. The knee was shear loaded by the hood leading edge, and the anterior cruciate ligament (ACL) ruptured. The tibia bending moment was less than the injury threshold. When the cyclist's knee position was lower than the hood leading edge, the hood leading edge contacted the thigh of the cyclist, and the cyclist rotated with the femur as the pivot point about the hood leading edge. In this case, the head impact location of the cyclist against the car was comparable to that of the pedestrian collision. The knee shear displacement and the tibia bending moment were less than the injury thresholds.

Conclusion: The knee height of the cyclist relative to the hood leading edge affected the global kinematics and the head impact location against the car. The loading mode of the lower extremities was also dependent on the initial positions of the lower extremities relative to the car structures. In the foot up and front posture, the knee was loaded in a lateral shear direction by the hood leading edge and as a result the ACL ruptured. The bicycle frame and the struck-side lower extremity interacted and could influence the loadings on lower extremities.     

Impact and effectiveness of Bio-Coke conversion from biomass waste as alternative source of coal coke in Southeast Asia

Journal of Material Cycles and Waste Management - Growing concern over fossil fuel depletion and the environmental impact of greenhouse gases have driven the demand for solid biofuel energy as an...     

Measuring future dynamics of genuine saving with changes of population and technology: application of an integrated assessment model

Theoretical and empirical studies have been conducted on the genuine saving (GS) based on neoclassical economic theory to assess sustainable development (SD). However, only market prices and statistical national accounts have been used in empirical studies due to limited data availability. The data availability limits to measure GS only in the past and current, causing a wide gap with theoretical results. In this paper, we propose computing GS using an integrated assessment model (IAM) as connected to the mainframe model of macroeconomy. This enables us to use shadow prices, rather than market prices, obtained through an IAM, which ensures substantial consistency among variables. An example would be endogenous capital–output ratio and the rate of TFP. Also, our indicator of GS is more comprehensive in that they now account for various resources, environmental degradation, and land use. Our simulation results, with a particular focus on GS with population change (GSn) and with technological change as well (GSnt), show a sustainable future for up to the end of the century thanks to declining population in the latter half of the century and technological progress, although GS without accounting for population and technology tend to be negative, driven by, among others, capital depreciation and net primary productivity degraded by land use.     

Synthesis of novel polymer type sulfoxide solid phase combined with the porogen imprinting for enabling selective separation of polychlorinated biphenyls

We developed a novel polymer type sulfoxide-modified solid phase enabling to achieve selective separation of polychlorinated biphenyls (PCBs) from insulation oil. In this study, firstly we prepared base-polymer based on the concept of the molecular imprinting to capture PCBs in selectively, then, the sulfoxide groups were modified on the pore surface of base-polymers by changing preparation methods. As results of liquid chromatographic analyses for the polymers as columns, the base-polymer prepared by xylene as a porogenic solvent showed selective retention ability for chlorinated aromatic compounds by the porogen imprinting effect. Additionally, the polymer-type sulfoxide solid phases showed highly retention ability for PCBs by increasing amount of introduced sulfoxide groups. Consequently, the results of separation of PCBs comparing to insulation oil suggested that the prepared solid phase can be used for the selective separation of PCBs at the same level as a commercially available media utilized for the regulated method.     

Traditional Farming Landscapes for Sustainable Living in Scandinavia and Japan: Global Revival Through the Satoyama Initiative

Traditional, pre-industrial farming was adapted to the natural environment—topography, geology, hydrology, climate, and biota. Traditional land use systems are still to be traced in Scandinavia as an “infield/outland landscape”, and in Japan as a “Satoyama landscape.” There are obvious similarities and differences in land use—the main difference being that pasturing of cattle and sheep has been less important in Japan. These land use systems can be traced back to early sedentary settlements 1500–2500 years ago. In both regions, traditional management almost ceased in the mid-twentieth century leading to afforestation and decreased biological diversity. Today, there is in Japan a growing movement for landscape restoration and promotion of a sustainable living countryside based on local agrarian and forestry production, local energy, tourism, etc. With this background, the so-called Satoyama Initiative has been organized and introduced as a global socio-ecological project with ecosystem services for human well-being.     

Removal of Pb(II) from water using keratin colloidal solution obtained from wool

The aim of this study is to investigate the use of keratin colloidal solution, which was obtained from wool, for the removal of Pb(II) from water. The addition of keratin colloidal solution (15 g L^?1, 0.30 mL) to a Pb(II) solution (1.0 mM, 0.90 mL, pH 5.0) resulted in the formation and precipitation of a Pb–keratin aggregate. Measurement of the Pb(II) and protein concentrations in the supernatant solution revealed that 88 and 99 % of the Pb(II) and keratin protein were removed from the solution, respectively. The maximum Pb(II) uptake capacity of keratin in the colloidal solution was 43.3 mg g^?1. In addition, the Pb–keratin aggregate was easily decomposed via the addition of nitric acid, which enabled the recovery of Pb(II). However, aggregation did not occur in solutions with Pb(II) concentrations below 0.10 mM. Therefore, we used a keratin colloidal solution encapsulated in a dialysis cellulose tube to remove Pb(II) from 0.10 mM solutions, which enabled the removal of 95 % of the Pb(II). From these results, we conclude that keratin colloidal solution is useful for the treatment of water polluted with Pb(II).