In-Situ Fenton-Like Oxidation of Volatile Organics: Laboratory,Pilot, and Full-Scale Demonstrations

Laboratory, pilot, and full-scale experiments were used to evaluate and optimize the ISOTEC^SM remedial process at a warehousing facility in Union, New Jersey. Based on modified Fenton's oxidative chemistry, the ISOTEC^SM process uses a proprietary catalytic agent that delays formation of reactive hydroxyl radicals. This allows adequate dispersion of the hydroxyl radicals, which is an oxidizing agent, throughout a contaminant plume. Ground-water at the site was contaminated with high levels of gasoline and waste oil constituents, principally BTEX and MTBE. Bench scale microcosm studies were used to evaluate the appropriate site-specific stoichiometric relationships between catalyst, stabilizers, and oxidizers; the effect of contaminant type and concentration; and the pH optima. Based on results of the laboratory studies, a pilot-scale study was performed at the site. One injection point for catalyst, stabilizers, and oxidant was installed in the contaminated zone at the site, with one hydraulically connected downgradient well used for monitoring. A single treatment of the reagents in the optimal stoichiometry determined from the laboratory study was injected in-situ over a period of three days. A 98.5 percent reduction in volatile organics was observed in the area treated, with the radial extent of treatment estimated to be approximately 20 feet, based on the presence of hydroxyl radicals detected in hydraulically connected areas and at the surface. The full-scale process employed six injection points and three treatment cycles over a three-month period. Subsequent to treatment, contaminant levels were either nondetectable or were reduced to below applicable New Jersey groundwater standards, with regulatory closure on the site achieved in less than one year.     

Dissipation of chlorpyrifos in two soil environments of semi-arid India

The dissipation of chlorpyrifos (20 EC) at environment-friendly doses in the sandy loam and loamy sand soils of two semi-arid fields and the presence of pesticide residues in the harvested groundnut seeds, were monitored. The movement of chlorpyrifos through soil and its binding in the loamy sand soil was studied using 14C chlorpyrifos. Chlorpyrifos was moderately stable in both loamy sand and sandy loam soils, with half-life of 12.3 and 16.4 days, respectively. With 20 EC treatments the dissipation was slower for standing crop than seed treatment, indicative of the high degradation rates in the bioactive rhizosphere. In soil, 3,5,6-trichloro-2-pyridinol (TCP) was the principal breakdown product. Presence of 3,5,6-trichloro-2-methoxypyridine (TMP), the secondary metabolite, detected in the rhizospheric samples during this study, has not been reported earlier in field soils. The rapid dissipation of the insecticide from the soil post-application might have resulted from low sorption due to the alkalinity of the soil and its low organic matter content, fast topsoil dissipation possibly by volatilization and photochemical degradation, aided by the low water solubility, limited vertical mobility due to confinement of residues to the upper 15 cm soil layers and microbial mineralization and nucleophilic hydrolysis. Contrary to the reports of relatively greater mobility of its metabolites in temperate soils, TMP and TCP remained confined to the top 15 cm soil. The formation of bound residues (half-life 13.4 days) in the loamy sand soil was little and not "irreversible." A decline in bound residues could be correlated to decreasing TCP concentration. Higher pod yields were obtained from pesticide treated soils in comparison to controls. Post-harvest no pesticide residues were detected in the soils and groundnut seeds.     

The development and application of a simplified ozone modeling system (SOMS)

This paper describes the development and evaluation of a computationally efficient semi-empirical photochemical model that can be used as a screening tool to obtain quick estimates of the effect of a large number of VOC and NO_x emission control strategies on ozone concentrations. Selected control strategies can subsequently be examined with a more complex model. The model is one component of an ozone management system, the regional ozone decision model (RODM), designed to examine the costs and environmental consequences of alternate ozone abatement strategies.The model was developed by systematic simplification of a detailed photochemical model. At each step of the simplification, the simplified model was tested against observations and against results from the detailed model. The first major simplification was the introduction of a highly parameterized chemistry mechanism, originally developed by Azzi et al. (1992 Proc. 11th Int. Clean Air Conf., 4th Regional IUAPPA Conf.). This modification resulted in a factor of 5 improvement in the computational efficiency of the model. The model with the simplified chemistry was then tested by applying it to a photochemical oxidant episode in the San Joaquin Valley of California. Further improvements in computational speed and efficiency were obtained by uncoupling the chemistry from the transport of VOC and NO_x.     

Yield and Water Productivity of Winter Wheat under Various Irrigation Capacities

The Agricultural Production Systems sIMulator model validated in a prior study for winter wheat was used to simulate yield, aboveground crop biomass (BM), transpiration (T), and evapotranspiration under four irrigation capacities (ICs) (0, 1.7, 2.5, and 5 mm/day) with two nitrogen (N) application rates (N1, 94 kg N/ha; N2, 160 kg N/ha) to (1) understand the performance of winter wheat under different ICs and (2) develop crop water production function under various ICs and N rates. Evaluation was based on yield, aboveground crop BM, transpiration productivity (TP), crop water productivity (WP), and irrigation WP (IWP). Simulation results showed winter wheat yield increased with increase in N application rate and IC. However, the rate of yield increase gradually reduced with additional irrigation beyond 2.5 mm/day. A 5 mm/day IC required a total of 190 mm irrigation and produced a 5%–16% yield advantage over 2.5 mm/day. This indicates it is possible to reduce groundwater use for wheat by 50% incurring only 5%–16% yield loss relative to 5 mm/day. The TP and IWP for grain were slightly higher under IC of 1.7 mm/day (15.2–16.1 kg/ha/mm and 0.98–1.6 kg/m³) when compared to 5 mm/day (14.7–15.5 kg/ha/mm and 0.6–1.06 kg/m³), respectively. Since TP and IWPs are relatively higher under lower ICs, winter wheat could be a suitable crop under lower ICs in the region. Relationship between yield–T and yield–ET was linear with a slope of 15–16 and 9.5–10 kg/ha/mm, respectively. Editor's note : This paper is part of the featured series on Optimizing Ogallala Aquifer Water Use to Sustain Food Systems. See the February 2019 issue for the introduction and background to the series.     

Public participation in NGO-oriented communities for disaster prevention and mitigation (N-CDPM) in the Longmen Shan fault area during the Wenchuan and Lushan earthquake periods

ABSTRACT

The Longmen Shan fault area in southwest China is one of the world’s most active earthquake zones. The epicenters of the two most recent earthquakes, the 2008 Wenchuan earthquake (8.0?Ms) and the 2013 Lushan earthquake (7.0?Ms), both of which caused serious losses, were only 85?km apart. Community-based disaster risk reduction is the foundation of the disaster management system pyramid and is critical to the success of ‘sustainable hazard mitigation’. Based on multiple collaborative stakeholder perspectives, this paper examines public participation in an NGO-oriented Community for Disaster Prevention and Mitigation (N-CDPM) in the period between the two earthquakes as a multi-stage problem; N-CDPM establishment, normal operations, disaster testing, and continuous improvement. Multi-stage field research was conducted in the affected areas in the Longmen Shan fault area to examine the collaboration in each stage, after which the differences were compared across the four stages based on eight key indices; scales, core stakeholders, core network stability, mean number of lines, mean collaborative level, governments, and individual and public organization participation. The government participation, individual participation, and public organization participation are then discussed. This paper provides a novel research approach to CDPM in multiple earthquake regions and gives rich insights into the collaboration between the government and the public for N-CDPM.     

Assisted phytostabilization of Pb-spiked soils amended with charcoal and banana compost and vegetated with Ricinus communis L. (Castor bean)

Environmental Geochemistry and Health - A greenhouse experiment was performed to elucidate the potency of Prosopis juliflora charcoal (PJC) and banana waste compost (BWC) to improve soil fertility...     

Distribution and possible source of trace elements in the sediment cores of a tropical macrotidal estuary and their ecotoxicological significance

The paper presents the first document regarding concentration, distribution and possible sources of selected trace elements (Cu, Fe, Mn, Zn, Cr, Co, Ni, Pb, Al, B and Ba) in core sediments (<63 micro particle size) from the lower stretch of Hugli (Ganges) estuary, northeast coast of Bay of Bengal by ICP-AES and EDXRF to evaluate geochemical processes influencing their distribution and possible environmental consequences. The levels of elements showed a wide range of variations in different core depths, in upper and lower intertidal zones as well as among three sampling stations. The most interesting feature of the study is the downward increase of concentrations of majority of the elements reaching overall maximum values at a depth of 20-28 cm in upper littoral zone of the site located in the extreme downstream stretch of the estuary. Values of organic carbon showed very strong positive correlations with most of the elements as revealed by correlation matrix (r) values. The interelemental relationship revealed the identical behavior of element during its transport in the estuarine environment. The overall variation in concentration can be attributed to differential discharge of untreated effluents originating from industrial, agricultural, and aquacultural sources as well as from domestic sewage along with the fishing and boating activities. The resulting compositional dataset was tested by principal component analyses and cluster analyses. Pollution load index (PLI) and index of Geoaccumulation (Igeo) revealed overall low values but the enrichment factors (EFs) for Pb were typically high for all the stations. The mean concentrations of Zn and to some extent Cu exceeded the Effects Range-Low (ER-L) values in the majority of the cases indicating that there may be some ecotoxicological risk to organisms living in sediments. The concentration of the trace elements reported in this work is useful as baselines for comparison in future sediment quality studies.     

Toxicity of endosulfan on growth,photosynthesis, and nitrogenase activity in two species of Nostoc (Nostoc muscorum and Nostoc calcicola)

Treatments of the cyanobacteria Nostoc muscorum and Nostoc calcicola with the insecticide endosulfan (5, 10, and 20?µg?mL^?1) inhibited growth, photosynthetic pigments, photosynthetic, and nitrogenase activities. The sensitivity of N. muscorum to endosulfan was higher than that of N. calcicola. The toxic effect of endosulfan was more pronounced on phycocyanin; however, a considerable reduction in chlorophyll a and carotenoids was also noticed. ¹⁴C-fixation appeared to be more sensitive to the insecticide than photosynthetic oxygen evolution. Endosulfan caused strong inhibition of photosystem (PS) II activity whereas PS I was least affected. The inhibition of PS II activity was partially restored by electron donors (DPC, NH₂OH, and MnCl₂) at low dose of endosulfan. Nitrogenase activity was significantly suppressed in both species by the endosulfan at high dose (20?µg?mL^?1). On the basis of our comparative analysis, N. calcicola was found to be endosulfan resistant and can be used in paddy fields for better productivity under pesticide stress.     

Large-scale green synthesis of Cu nanoparticles

This article reports a novel, eco-friendly herbal method to synthesize Cu nanoparticles in large scales. Cu nanoparticles are an alternative to Ag and Au nanoparticles and have potential applications in many industrial areas. Many synthetic routes have been documented for the preparation of copper nanoparticles, but very few routes are eco-friendly and large-scale. We report here the preparation of Cu nanoparticles from aqueous CuSO₄ using non-toxic and inexpensive materials like curd, milk, and herbal extracts such as tamarind and lemon juice as capping agents. X-ray diffraction and transmission electron microscopy show that produced particles are nanocrystalline copper 20–50 nm in size with a face-centered cubic structure. Fourier-transformed infrared spectroscopy evidences the role of organic acids in the capping process. The novelty of this work is the synthesis of Cu nanoparticles from CuSO₄ without electricity and using non-toxic, cheap capping agents.