Radiation heat transfer in transient dust cloud flame propagation

This study investigates the impact of radiation heat transfer and heat conduction on dust cloud combustion. Radiation plays a very important role in the stability of dust cloud flame, and increasing the amount of radiation drastically raises the possibility of instability and explosion in a dust cloud mixture. Flame speed, which is a function of mixture characteristics, can exhibit a fluctuating behavior. By using the discrete heat source method, it would be possible to study the transient propagation of dust flames. Thus, the propagation speed of flame can be obtained, and as time goes by, the transient speed of dust flame will reach its steady state value. By considering the radiation effect, better agreement is observed between the obtained results and experimental data.     

Sample Preparation Followed by High Performance Liquid Chromatographic (HPLC) Analysis for Monitoring Muconic Acid as a Biomarker of Occupational Exposure to Benzene

Factors affecting solid phase extraction (SPE) of trans,trans-muconic acid (ttMA), as a benzene biomarker, including sample pH, sample concentration, sample volume, sample flow rate, washing solvent, elution solvent, and type of sorbent were evaluated. Extracted samples were determined by HPLC-UV(highperformance liquid chromatography-ultraviolet). The analytical column was C18, UV wave length was 259 nm, and the mobile phase was H2O/methanol/acetic acid run at flow rate of 1 ml/min. A strong anion exchange silica cartridge was found successful in simplifying SPE. There was a significant difference between recoveries of ttMA when different factors were used (p < .001). An optimum recovery was obtained when sample pH was adjusted at 7. There was no significant difference when different sample concentrations were used (p > .05). The optimized method was then validated with 3 different pools of samples showing good reproducibility over 6 consecutive days and 6 within-day experiments.     

Exploration and development of Iran's oilfields through buyback

The use of buyback for the development of oil and gas fields is an established mechanism in Iran. Current legislation authorizes the National Iranian Oil Company (NIOC) to use buyback for both exploration and development. The buyback scheme can be defined as a risk service contract, under which the contractor is paid back by being allocated a portion of oil/gas produced as a result of providing services. Buyback is based upon a defined scope of work, a capital cost ceiling, a fixed remuneration fee and a defined cost recovery period. When buyback is used for both exploration and development, the specifications of the field to be developed are unknown at the time of contracting and therefore agreement on the scope of work, duration of development operations, ceiling for capital costs, fixed remuneration fee, and duration of cost recovery need to be deferred to the time when a commercial field is discovered. This article first outlines the introduction of buyback for development of Iran's oil and gas fields. It then examines the main features of the mechanism. Third, the use of buyback for both exploration and development is explored and related challenges discussed. Finally, the article reviews the new buyback model proposed by NIOC to address these challenges.     

Protective effects of quercetin against sodium fluoride-induced oxidative stress in rat erythrocytes

Protective effects of quercetin against oxidative stress induced by sodium fluoride intoxication in rat erythrocytes were evaluated. Rats were divided into five groups consisting of 10 in each for this experiment. The animals of group I received water and standard diet to serve as control group, the animals of groups II and III were treated with quercetin (10 and 20?mg?kg^?1 body weight), administrated intraperitoneally for 7 days followed by sodium fluoride (600?ppm) in drinking water for the next 7 days. The animals of group IV were treated with vitamin C (10?mg?kg^?1) intraperitoneally for 7 days followed by sodium fluoride treatment for next 7 days serving as positive control group. The animals of group V were treated only with sodium fluoride (600?ppm) for the same time and were used as control group. Blood sample were collected via retro-orbital puncture. The antioxidant enzymes, superoxide dismutase, and catalase, as well as the levels of reduced glutathione and lipid peroxidation end products were measured in erythrocytes. There was a significant increase in lipid peroxidation along with a decrease in superoxide dismutase activity in the erythrocytes of sodium fluoride-treated animals. Quercetin treatment prior to fluoride administration normalized the levels of all parameters measured in the rat erythrocytes.     

Bioremediation of toxic metals mercury and cesium using three types of biosorbent: bacterial exopolymer,gall nut,and oak fruit particles

Cesium and mercury are two mono-valent elements which can be found in toxic industrial, medical, and nuclear wastes. Their presence in the environment has deleterious effects on the ecosystem, living organisms including humans. Due to the chemical nature of these metals, bioremediation by conventional methods is more difficult to achieve compared to other metals. In this study, we used three biosorbents (oak powder, gall nut, and bacterial exopolymer) for the bioremediation of Hg and Cs. Bio-polymer was produced in the GMS mineral broth. Synthetic wastes of Hg(NO₃)₂ and isotope Cs-133 as the single-metal solutions were used. The biorefining process was carried out in glass columns, made of Pyrex, with dimensions 20?×?7/2?cm² with a V-shaped bottom. The samples were analyzed using atomic absorption. The experimental results showed that eliminated metal percent by oak powder, gall nut, and bacterial exopolymer were, respectively, of 94.8%, 96%, and 13.8% for Hg and 7.8%, 4.4%, and 69.4% for Cs. The tests revealed that Ca⁺⁺, when used as flocculant, played a key role in both biosorption and bio-precipitation rates. Consequently, it was concluded that the investigated biosorbents could be use as an integrated biosorption system for the refinement of mixed wastes.     

Histopathological effects of copper oxide nanoparticles on the gill and intestine of common carp (Cyprinus carpio) in the presence of titanium dioxide nanoparticles

In current research, the combined effects of copper oxide nanoparticles (CuO NPs) and titanium dioxide nanoparticles (TiO₂ NPs) on the histopathological anomalies of gill and intestine tissues in common carp (Cyprinus carpio) were studied. Common carp were exposed to TiO₂ NPs (10.0?mg L^?1), CuO NPs (2.5 and 5.0?mg L^?1), and mixture of TiO₂ NPs (10.0?mg L^?1)?+?CuO NPs (2.5 and 5.0 mg?L^?1) for two periods of exposure (10 and 20 days) and recovery (30 and 40 days). The most common histopathological anomalies in the gill of common carp such as hyperplasia, oedema, curvature, fusion, aneurism, and necrosis were observed. The synergistic effect of co-existing TiO₂ NPs and CuO NPs reduced the length of secondary lamella and increased the diameters of the gill filaments and secondary lamellae. Moreover, the presence of TiO₂ NPs increased the CuO NPs effects on the histopathological anomalies of intestine tissue and the synergistic effect of TiO₂ NPs and CuO mixture leads to an increase in the severity of histopathological lesions such as degeneration, swelling of goblet cells, and necrosis - erosion in the intestine tissue. In conclusion, the presence of TiO₂ NPs increased the toxicity of CuO NPs.     

Comparative Study of Xylan Extracted by Sodium and Potassium Hydroxides (NaOH and KOH) from Bagasse Pulp: Characterization and Morphological Properties

Xylan is the second most abundant polysaccharide and the predominant hemicellulose component of soda bagasse pulp. The present endeavor focuses on increasing the value addition to underutilized agro-industrial residue such as bagasse. For this purpose, xylan was isolated by two conventional alkali extraction methods i.e. NaOH and KOH. The recovery rate and sugar composition of different reaction times and alkali consumptions were monitored with advanced method such as High Performance Liquid Chromatography (HPLC). The Fourier Transform Infrared Spectroscopy (FTIR) and Wide Angle X-ray spectroscopy (WAXS) were respectively employed to characterize the functional groups and Crystallinity Index (CrI) changes during the extraction process. It was explored that highest xylan recovery rates were obtained with 6% of NaOH at 120 min and 6% KOH at 45 min. The xylan morphology via WAXS was found that its structure to be amorphous. HPLC results also showed KOH had higher effectiveness than NaOH in terms of extracted xylan purity. Highest XGRs (Xylose to Glucose Ratios) were also achieved by KOH processes. Hence, this study contributes to the adequate utilization of agricultural residues, with promising potential for applications in the production of certain novel materials and chemical conversion industries.     

Organochlorine pesticide and polychlorinated biphenyl residues in feathers of birds from different trophic levels of South-West Iran

Persistent organochlorine pesticides (OCPs), such as dichlorodiphenyltrichloroethane (DDT) and its metabolites, hexachlorobenzene (HCB), alpha, beta and gamma-hexachlorocyclohexane (HCH) isomers, together with polychlorinated biphenyl (PCB) congeners (IUPAC Nos. 28, 52, 101, 138, 153 and 180), were determined in tail feathers from 37 birds belonging to 18 species, all originating from the South-West of Iran (Khuzestan, coast of the Persian Gulf). This is the first report on organochlorine contaminants in feathers from museum collections and it is an indication of the concentrations of OCPs and PCBs in the past (1991-1996). Median concentrations of HCHs, DDTs, PCBs and HCB were 22, 14, 11 and 10 ng/g feather, respectively. Significant correlations (p<0.05) were calculated between OCPs (except HCB) and PCBs in the bird feathers. p,p'-DDE and gamma-HCH were the most abundant OCPs, while CB 180, CB 138 and CB 101 were the predominant PCB congeners in almost all species. Significant differences (p<0.05) in the mean concentrations of DDTs and PCBs were detected among species grouped according to their feeding habits. Levels of DDTs and PCBs were highest in the carnivorous species and lowest in the herbivorous species. Levels of OCPs and PCBs in feathers of bids in the 1990s were generally below the thresholds reported to affect reproduction.     

A novel pollution index based on the bioavailability of elements: a study on Anzali wetland bed sediments

In this research, we study on the distribution of several elements in bed sediments of Anzali wetland. Anzali, one of the most important international wetlands, is located on the southern coast of the Caspian Sea in Iran. This wetland receives discharges of domestic, agricultural, and industrial wastewater, which affect the distribution of elements. Our contribution in this study is threefold. First, we measured the total concentration of metals as well as their chemical partitioning and bioavailability in the sediments. Second, we calculated anthropogenic portions of metals in the sediment of this area. The results reveal anthropogenic portion of metals as Mo > Mn > Cd > As > Zn > Hg > Co > Sn > Cu > V > Ag > Ni > Pb > Fe > Cr > Al, respectively. We evaluated the intensity of pollution by using an enrichment factor, the geo-accumulation index and the pollution index. All these indices do not take into consideration the bioavailability of the elements. As our third and most important contribution, we introduced a new formula that takes into account the bioavailability of different elements. In comparison with aforementioned pollution indices, our newly introduced pollution index has a higher Pearson correlation with anthropogenic portion of metals. This high-correlation coefficient shows that our proposed pollution index is an effective indicator for determining the level of pollution, while other indices preserve their own merits.     

Cumulative effects of developed road network on woodland—a landscape approach

Population growth, during the twentieth century, has increased demand for new farmlands. Accordingly, road networks have rapidly been developed to facilitate and accelerate human access to the essential resources resulted in extensive land use changes. The present study aims at assessing cumulative effects of developed road network on tree cover of Golestan Province in northern Iran. In order to detect changes over the study period of 1987–2002, the LULC map of the study area was initially prepared from the satellite images of Landsat TM (1987) and ETM+ (2002) using maximum likelihood supervised classification method. Afterwards, a total number of seven landscape matrices were selected to detect cumulative effects of the developed road network on woodland cover. The obtained results indicated that the fragile patches are mainly located at a distance of 171–342 m from the roadside. Furthermore, the majority of the patches affected by cumulative effects of development activities are situated at a distance of 342–684 m from the roadside, over an approximate area of 55 ha. The analysis of landscape metrics revealed that the developed road network has increased the landscape metrics of “the number of patches” and “patches perimeter-area ratio”. It has also followed by a decrease in metrics such as “patches area”, “Euclidean nearest neighbor distance”, “patches proximity”, “shape index”, “contiguity”, and “mean patches fractal dimension”. The road network has also increased the “number of patches” and decreased the “mean patches area” representing further fragmentation of the landscape. With identification of highly affected wooldland cover patches, it would be possible to apply adaptive environmental management strategies to preserve and rehabilitate high-priority patches.