A mini review of bisphenol A (BPA) effects on cancer-related cellular signaling pathways

Environmental Science and Pollution Research - Bisphenol A (BPA) is a plasticizer used widely in many industrial products and is now well established as an endocrine-disrupting chemical (EDC). BPA...     

Effects of pen bedding and feeding high crude protein diets on manure composition and greenhouse gas emissions from a feedlot pen surface

Greenhouse gas (GHG) emissions from concentrated animal feeding operations vary by stage of production and management practices. The objective of this research was to study the effect of two dietary crude protein levels (12 and 16%) fed to beef steers in pens with or without corn stover bedding. Manure characteristics and GHG emissions were measured from feedlot pen surfaces. Sixteen equal-sized feedlot pens (19?×?23 m) were used. Eight were bedded approximately twice a week with corn stover and the remaining eight feedlot pens were not bedded. Angus steers (n = 138) were blocked by live weights (lighter and heavier) with 7 to 10 animals per pen. The trial was a 2?×?2 factorial design with factors of two protein levels and two bedding types (bedding vs. non bedding), with four replicates. The study was conducted from June through September and consisted of four ?28-day periods. Manure from each pen was scrapped once every 28 days and composite manure samples from each pen were collected. Air samples from pen surfaces were sampled in Tedlar bags using a Vac-U-Chamber coupled with a portable wind tunnel and analyzed with a greenhouse gas gas chromatograph within 24 hr of sampling. The manure samples were analyzed for crude protein (CP), total nitrogen (TN), ammonia (NH₃), total volatile fatty acid (TVFA), total carbon (TC), total phosphorus (TP), and potassium (K). The air samples were analyzed for methane (CH₄), carbon dioxide (CO₂), and nitrous oxide (N₂O) concentrations. The concentration of TN was significantly higher (p < 0.05) in manure from pens with cattle fed the high protein diets. The volatile fatty acids (VFAs) such as acetic, propionic, isobutyric, butyric, isovaleric, and valeric acids concentrations were similar across both treatments. There were no significant differences in pen surface GHG emissions across manure management and dietary crude protein levels.

Implications: Livestock manure produces odor and emits GHGs (CO₂, CH₄, and N₂O) at different stages of production and management practices that have significant environmental concerns. Thus, it is important to measure GHG contributions from different sources and develop appropriate mitigation strategies for minimizing GHG contribution from livestock production facilities. Two dietary protein levels (12 and 16%) fed to beef steers in pens with or without corn stover bedding were studied. The results indicated that dietary protein levels and bedding vs. no bedding had very little effect on GHG emissions and manure composition under open feedlot conditions in North Dakota climatic conditions and management practices.     

Heavy metal contamination in feathers of Western Reef Heron (Egretta gularis) and Siberian gull (Larus heuglini) from Hara biosphere reserve of Southern Iran

The main objectives of article were monitor the metal concentrations of cadmium, lead, copper, zinc, cobalt, and iron, in the feather of shorebirds species, Western Reef Heron (Egretta gularis) and Siberian Gull (Larus heuglini) from Hara Biosphere Reserve of Southern Iran; and identify any relationships between species. Assaying heavy metals by using Shimadzu AA 680 flame atomic absorption spectrophotometer, the results were given as micrograms per gram dry weight. The concentrations of heavy metal were found to follow the order of iron>zinc>copper>lead>cadmium>cobalt for E. gularis and of iron>zinc>lead>copper>cadmium>cobalt for L. heuglini. Also, they showed that the cadmium, copper, and cobalt concentrations were higher in females than in the males, while the lead concentration for E. gularis and L. heuglini was higher in males. The cadmium concentration means they were measured as1.16 and 1.37 μg/g for E. gularis and L. heuglini, respectively, whereas the lead concentration means 7.04 and 5.48 μg/g for E. gularis and L. heuglini, respectively. The concentrations of nonessential trace elements in E. gularis and L. heuglini were generally comparable to values reported in other studies. The average levels of lead we observed in these birds were greater than 5 μg/g dry weight in the feather that is known to be associated with adverse behavioral or reproductive effects. Data analysis showed that there was a positive correlation between copper and zinc (P?相似文献   

Contamination of lead (Pb) in the coastal sediments of north and south of Iran: a review study

Coastal areas of Iran are heavily affected by urbanisation, industrialisation, and maritime activities. One consequence of this environmental pressure is the contaminants accumulation, as heavy metals, into the marine ecosystem. In this review, the coastal areas in the north and south of the country were assessed for lead (Pb) contamination of, one of the most toxic metals found in the environment. All studies conducted during 2006–2016 with at least 10 specimens that reported the mean and standard deviation of Pb were considered in this review. Heterogeneity between studies was assessed using the Q and I² statistics. The Pb mean concentration overall studies was estimated to be 21.88?µg/g (95% CIs: 16.25–27.50). Random effect model showed no statistical difference in mean Pb concentration levels between south and north coasts. However, the variability in Pb mean concentrations within southern coasts was considerable and statistically significant. Moreover, the Pb concentrations in the northern coasts of Persian Gulf and Oman Sea, in south of Iran, decreased in the following order Hormozgan > Khuzestan > Sistan-VA-Balluchestan > Bushehr while in the southern coasts of Caspian Sea, in north of Iran, decreased in the order Guilan > Mazandaran > Golestan.     

City hazardous gas monitoring network

In our today's societies, many dangerous chemicals are produced and transported. Due to the vast use of chemicals, more chemical accidents are taking place with huge losses. In this study a city hazardous gas monitoring network was designed to detect the dispersion of toxic and combustible gases in the primary stages. The network could cover hazardous chemical facilities, important hazardous chemical routes, warehouses and special locations which may be the targets of terrorist attacks. The network is consisted of several local networks and a central control panel complex. Each local network has a local control panel in the center and many detectors and sounders around it at distances less than 3000 m that communicate with the local control panels wirelessly. In each location there are two types of gas detectors, toxic and combustible, and a sounder which are equipped with a wireless, radio frequency modem allowing the units to communicate readings and other information on a real-time basis with a remotely located local control panel. High sensitive Photo Ionization Detectors, PIDs, are used to provide fast and low-level on-site screening for chemicals contamination. Combustible gas detectors are the second choice to sense the combustible gas and verify the readings of PIDs in this regard. The central panel consists of several connected control panels work uniquely helping a computer set and the appropriate software and communicate with local control panels via telephone lines. All of the network components are shown on the monitor of central panel with special symbols by geographical information system program. The system is fully addressable so that the high level detection of a detector produces a blinking color double-circle around its symbol in GIS plan. In case of high level gas detection, a team of experts who are fully equipped with different portable detectors depart to the site to test the field to identify the chemicals. All readings of detectors are saved in a data bank and then analyzed to find any chemicals spills and leakages. The network was simulated by a special program so that the components of local networks and the central panel are shown in separate windows. By clicking on one detector on environmental window the formerly designed responses will be activated in central panel window.     

Designing a developed model for assessing the disaster induced vulnerability value in educational centers

To date, the models developed for assessing the vulnerability of societies have only taken account of the economic problems in the societies. Offering a model based on analytical hierarchy process and failure mode and effect analysis logic, the current study aims to determine the factors influencing the vulnerability of a higher education center and finally defines a vulnerability index. This model divides the factors influencing vulnerability into three categories: (1) the structure and layout of the buildings, (2) the occupants’ characteristics, (3) the controlling and warning systems. The academy community center of Science and Research Branch was assessed in terms of vulnerability. The findings indicated that the vulnerability value relating to various sections and university buildings was higher than the acceptable level which entailed the due attention of educational managers. The findings showed that if some parts of the educational and administrative buildings were used for laboratory as well as for the storage of hazardous and flammable materials, then the vulnerability value will be increased to 200. This highlights the impact that the type of buildings application has on the level of vulnerability. The study has been performed in the Science and Research Branch as an educational center in Tehran during 2009–2010.     

From disaster to development: a systematic review of community‐driven humanitarian logistics

A plethora of untapped resources exist within disaster‐affected communities that can be used to address relief and development concerns. A systematic review of the literature relating to community participation in humanitarian logistics activities revealed that communities are able to form ad hoc networks that have the ability to meet a wide range of disaster management needs. These structures, characterised as Collaborative Aid Networks (CANs), have demonstrated efficient logistical capabilities exclusive of humanitarian organisations. This study proposes that CANs, as a result of their unique characteristics, present alternatives to established humanitarian approaches to logistics, while also mitigating the challenges commonly faced by traditional humanitarian organisations. Furthermore, CANs offer a more holistic, long‐term approach to disaster management, owing to their impact on development through their involvement in humanitarian logistics. This research provides the foundation for further theoretical analysis of effective and efficient disaster management, and details opportunities for policy and practice.     

Development of urban planning guidelines for improving emergency response capacities in seismic areas of Iran

This paper presents the results of research carried out to improve emergency response activities in earthquake-prone areas of Iran. The research concentrated on emergency response operations, emergency medical care, emergency transportation, and evacuation—the most important issues after an earthquake with regard to saving the lives of victims. For each topic, some guidelines and criteria are presented for enhancing emergency response activities, based on evaluations of experience of strong earthquakes that have occurred over the past two decades in Iran, notably Manjil (1990), Bam (2003), Firouz Abad-Kojour (2004), Zarand (2005) and Broujerd (2006). These guidelines and criteria are applicable to other national contexts, especially countries with similar seismic and social conditions as Iran. The results of this study should be incorporated into comprehensive plans to ensure sustainable development or reconstruction of cities as well as to augment the efficiency of emergency response after an earthquake.     

Feasibility of incorporating treated lignins in fiberboards made from agricultural waste

This paper studies the feasibility of incorporating treated lignins in fiberboards made from Vitis vinifera as an agricultural waste. The treated lignins are the purified Kraft lignin and the alkaline hydrolyzed Kraft lignin. V. vinifera raw material and its fibers were characterized in terms of chemical composition and the results were compared to other biomass species. The chemical composition of treated lignins shows that they have high purity compared to the lignin raw material. The lignin-V. vinifera fibreboards were produced on laboratory scale by adding powdered treated lignins to the material that had previously been steam exploded. Some of the important properties of fibreboards prepared using the treated lignins as natural adhesives were evaluated. These properties were density, thickness swelling, water absorption, modulus of elasticity, modulus of rupture, internal bond strength. The explored levels of treated lignins vary from 5% to 20%. The results showed that binderless fibreboards, fibreboards made from V. vinifera fibers and alkaline hydrolyzed Kraft lignin have weaker mechanical properties. However, the fibreboards obtained using purified Kraft lignin have good mechanical and water resistance properties which satisfy the requirements of the relevant standards specifications.