Development of new footwear sole surface pattern for prevention of slip-related falls

In this study, a new rubber surface pattern for a footwear sole was developed to prevent slip-related falls. This pattern shows a high static coefficient of friction (SCOF) and a high dynamic coefficient of friction (DCOF) when sliding against a liquid contaminated surface. A hybrid rubber block, in which a rubber block with a rough surface (Ra = 30.4 μm) was sandwiched between two rubber blocks with smooth surfaces (Ra = 0.98 μm), was prepared. The ratio of the rough surface area to the whole rubber block surface area r was 0%, 30%, 50%, 80%, and 100%. The coefficient of friction of the rubber blocks was measured when sliding against a stainless steel plate with Ra of 0.09 μm contaminated with a 90% aqueous solution of glycerol. While the SCOF increased with an increase of the rough surface area ratio r, the DCOF during steady-state sliding decreased with an increase of the rough surface area ratio r. The rough surface area ratio of 50% achieved a SCOF value around 0.5 or more and a DCOF value greater than 0.5. Furthermore, the difference in the value of the SCOF and DCOF was the smallest for the rubber block with r of 50%. The results indicated that the rubber block with r of 50% would be applicable to a footwear sole surface pattern to prevent slip and fall accidents on contaminated surfaces.     

Extraction and cleanup methods of dioxins in house dust from two cities in Japan using accelerated solvent extraction and a disposable multi-layer silica-gel cartridge

A simple and rapid method for the extraction and cleanup of dioxins from house dust was developed using an accelerated solvent extraction (ASE) method and a multi-layer silica-gel cartridge. It was found that the WHO-TEQ levels of dioxins extracted from the house dust obtained by both a conventional soxhlet extraction and the ASE were almost equal, when the data obtained by both methods were compared. As for the cleanup method, a multi-layer silica-gel cartridge yielded higher dioxin recoveries than the alkaline digestion method. The average values of the dioxins in house dust from Kumagaya city and Sendai city in Japan (Sendai city is bigger than Kumagaya city with respect to the population and industry), were 15.6 pg TEQ/g (8.6-26.0 pg TEQ/g, n=5, Kumagaya city) and 16.0 pg TEQ/g (5.9-30.5 pg TEQ/g, n=5, Sendai city), respectively.     

Assessment of biological effects and harm to Japanese medaka due to carbonized carbon fibers generated by a pyrolysis carbon fiber recycling process

Journal of Material Cycles and Waste Management - Carbon-fiber-reinforced plastics (CFRPs) are used as structural materials in the aircraft and automotive industries owing to their lightweight and...     

Population risk assessment of ambient benzene and evaluation of benzene regulation in gasoline in Japan

The aggregate population cancer risk due to ambient benzene was evaluated for the entire Japanese population. This was done using data of ambient NO_x levels measured at as many as 2000 air pollution monitoring stations nationwide and the regression equation between the levels of benzene and NO_x obtained by continuous monitoring. The population-weighted exposure levels for the roadside population and general-environment population were calculated to be 2.1 ppb and 1.0 ppb, respectively. Eighty-four percent of the entire population was exposed to a lifetime cancer risk level of 1᎒^-5 or greater, and the annual number of cancer deaths was estimated to be 29.6 cases at the 1997 benzene level. Due to the regulation which established the upper limit of benzene content in gasoline to be 1 vol. % by January 2000, the total emission of benzene was estimated to be reduced by 27%, compared to 1993. The annual number of cancer deaths was expected to be reduced by 8.8 cases through the regulation of benzene in gasoline. Japanese petroleum companies have estimated the annual cost of the reduction of the benzene content in gasoline to be 25.6 billion yen. The cost per life saved by the regulation of benzene in gasoline is estimated to be 2.9 billion yen. The method implemented in this study to predict population risk is useful for identifying potential risk management options and evaluating their effectiveness before making decisions.     

Environmental assessment and accounting for the waste disposal stream in Bangkok,Thailand

It is very important that waste should be controlled and appropriately handled in a waste disposal stream, considering its impact on the environment. In this research, the LCA-EA model was applied to the current waste disposal stream of the BMR as well as other waste disposal stream scenarios, so that treatment cost, environmental load and environmental cost were assessed quantatively. The results of this study showed that in the current waste diposal stream in Bangkok, there were large contributions from carbon dioxide and methane to the greenhouse gas emissions from the stream. The study was able to quantify the reductions in environmental load associated with various waste disposal stream scenarios, using the baseline scenario as a standard.     

Occurrence, distribution, and ecological risk assessment of DDTs and heavy metals in surface sediments from Lake Awassa—Ethiopian Rift Valley Lake

Dichlorodiphenyltrichloroethanes (DDTs) and heavy metals are ubiquitous contaminants with high bioaccumulation and persistence in the environment, which can have adverse effects on humans and animals. Although applications of DDTs have been banned in many countries, developing countries like Ethiopia are still using these for agricultural and medicinal purposes. In addition, heavy metals are naturally present in the aquatic environment and distributed globally. In this study, the occurrence, distribution, and ecological risk of DDTs and heavy metals in surface sediments from one of the Ethiopian rift valley lakes were studied. Twenty-five surface sediment samples from Lake Awassa, Ethiopia were collected and analyzed for DDTs and heavy metals. Results showed that concentrations of total DDTs ranged from 3.64 to 40.2 ng/g dry weight. High levels of DDTs were observed in the vicinity of inflow river side and coastal areas with agricultural activities. The heavy metals content were followed the order Zn?>?Ni?>?Pb?>?Cu?>?Cr?>?Co?>?As?>?Cd?>?Hg. Correlation analysis and principal components analysis demonstrated that heavy metals were originated from both natural and anthropogenic inputs. The levels of DDE and DDD in surface sediments exceeded the sediment quality guideline values, indicating that adverse effects may occur to the lake. A method based on toxic-response factor for heavy metals revealed that the calculated potential ecological risk indices showed low ecological risk for the water body.     

Removal of Pb(II) from water using keratin colloidal solution obtained from wool

The aim of this study is to investigate the use of keratin colloidal solution, which was obtained from wool, for the removal of Pb(II) from water. The addition of keratin colloidal solution (15 g L^?1, 0.30 mL) to a Pb(II) solution (1.0 mM, 0.90 mL, pH 5.0) resulted in the formation and precipitation of a Pb–keratin aggregate. Measurement of the Pb(II) and protein concentrations in the supernatant solution revealed that 88 and 99 % of the Pb(II) and keratin protein were removed from the solution, respectively. The maximum Pb(II) uptake capacity of keratin in the colloidal solution was 43.3 mg g^?1. In addition, the Pb–keratin aggregate was easily decomposed via the addition of nitric acid, which enabled the recovery of Pb(II). However, aggregation did not occur in solutions with Pb(II) concentrations below 0.10 mM. Therefore, we used a keratin colloidal solution encapsulated in a dialysis cellulose tube to remove Pb(II) from 0.10 mM solutions, which enabled the removal of 95 % of the Pb(II). From these results, we conclude that keratin colloidal solution is useful for the treatment of water polluted with Pb(II).     

间歇曝气SBR处理养猪沼液的短程脱氮性能

采用间歇曝气序批式活性污泥法(intermittently aerated sequencing batch reactors,IASBR)处理养猪沼液,研究在控温30℃、分步进水条件下的短程脱氮性能.结果表明,进水化学需氧量(COD)与总氮(TN)的比值对脱氮性能影响很大,当进水COD/TN为0.8±0.2时,反应器内亚硝态氮浓度持续积累到高达800 mg·L~(-1),对TN、氨氮(NH~+_4-N)和总有机碳(TOC)的去除率仅分别为18.3%±12.2%、84.2%±10.3%、60.7%±10.7%;进水COD/TN提高到2.4±0.5后,亚硝态氮积累浓度迅速从800 mg·L~(-1)降低至10 mg·L~(-1)以下,TN、氨氮和TOC的去除率分别上升至90%、95%和85%以上.逐步缩短HRT以提高运行负荷,发现氨氮负荷是IASBR稳定脱氮的制约因素,体系耐受的氨氮负荷最大为0.30 kg·(m3·d)-1,当超过耐受负荷后,TN、氨氮和TOC的去除率将显著下降.整个运行阶段反应器内亚硝态氮积累率达74.6%~97.8%,运行稳定期实现TN去除率达90%以上,IASBR系统在低碳氮比下实现了高效稳定的短程硝化反硝化,且不需要额外添加碱度药剂,在处理高氨氮低碳氮比废水上具有优越性.     

Assessment of DDT contamination in house rat as a possible bioindicator in DDT-sprayed areas from Ethiopia and South Africa

Environmental Science and Pollution Research - Ethiopia and South Africa are among the few countries to still implement indoor residual spraying with dichloro-diphenyl-trichloroethane (DDT) for...