试点城市O3浓度特征分析

利用2009年O3试点城市的03监测数据,分析了北京、天津、上海、青岛、沈阳和广东的03浓度变化特征,统计了年超标情况,并结合气象要素数据分析了其对03浓度的影响.结果表明,不同城市各点位间03浓度变化趋势基本一致,但因点位类型不同,浓度存在差异；O3浓度呈单峰型日变化,在13:00-15:00出现最大值,6:00-7:00出现最小值；O3超标主要集中在4-8月份,广州和北京超标现象较多；O3浓度受温度、降水、风速和风向等气象要素影响较大.     

基于EFDC和WASP模型的突发水污染事故影响的预测预警

近年来，我国突发水污染事故频发。长江作为我国最重要的水源地，其水质安全受到沿江众多化工企业可能突发污染事故的威胁。因此，开展南京化工园突发水污染事故影响的预测预警研究意义重大。基于EFDC和WASP模型，建立了南京化工园突发水污染事故影响的预测模型，并以龙翔甲苯罐区泄漏为例进行了事故情景模拟。研究表明：所建的预测模型能够对南京化工园突发水污染事故后污染物的水环境行为进行快速的模拟和预测，并且能够在地理信息系统的图层上以动画的形式实时展示事故影响的范围和程度，可以为南京化工园突发水污染事故的预警应急提供决策依据；基于EFDC构建的二维水动力模型能够较为准确地反映研究区的水动力情况；事故情景中排放的甲苯在研究江段能够较快地稀释扩散，挥发作用对甲苯的衰减过程影响显著，平水期比枯水期更有利于水体中甲苯的衰减     

扩散电化学法现场测定高湿度烟气中低浓度二氧化硫能力的 研究

根据目前定电位电解法出现的问题,对扩散电化学法测定固定污染源高湿度烟气中低浓度二氧化硫的能力展开研究。结果显示,扩散电化学法测定值与参比值保持较好的一致性,说明该方法不受固定污染源烟气浓度、湿度以及负压等因素的影响,对高湿烟气中低浓度二氧化硫具备较强测定能力,非常适合该状况下SO₂的现场测定。但是方法也受传感器制约,适用范围受到限制。     

Climate change mitigation policy paradigms—national objectives and alignments

The aim of this paper is to assess how policy goals in relation to the promotion of green growth, energy security, pollution control and greenhouse gas (GHG) emissions reductions have been aligned in policies that have been implemented in selected countries during the last decades as a basis for discussing how a multi objective policy paradigm can contribute to future climate change mitigation. The paper includes country case studies from Brazil, Canada, China, the European Union (EU), India, Japan, Mexico, Nigeria, South Africa, South Korea and the United States covering renewable energy options, industry, transportation, the residential sector and cross-sectoral policies. These countries and regions together contribute more than two thirds of global GHG emissions. The paper finds that policies that are nationally driven and that have multiple objectives, including climate-change mitigation, have been widely applied for decades in both developing countries and industrialised countries. Many of these policies have a long history, and adjustments have taken place based on experience and cost effectiveness concerns. Various energy and climate-change policy goals have worked together in these countries, and in practice a mix of policies reflecting specific priorities and contexts have been pursued. In this way, climate-change mitigation has been aligned with other policy objectives and integrated into broader policy packages, though in many cases specific attention has not been given to the achievement of large GHG emission reductions. Based on these experiences with policy implementation, the paper highlights a number of key coordination and design issues that are pertinent to the successful joint implementation of several energy and climate-change policy goals.     

毒性鉴别评价方法对城镇污水处理厂去除水中有毒物质的分析实例

以江苏省常州市城北污水算处理厂的进水、活性污泥处理系统的出水以及A^2O处理工艺的出水为研究对象，对进出水进行Daphnia magna急性毒性试验。结果表明，进水对Daphnia magna具有24h急性毒性，经过活性污泥处理工艺处理及A^2O处理工艺处理，两股出水均不显示24h急性毒性，采用毒性鉴别评价（Toxicity Identification Evaluation,TE）方法对进水进行监测和评价，发现曝气可去除进水的毒性，C18固相提取亦可去除进水毒性，进水中存在的主要毒物为易挥发的非极性有机化合物，进一步检测可知，进水中的关键毒物主要为邻丙基甲醛肟、1，1－甲基乙基－2－甲氧基苯酚、2－氮，氮二甲基苯甲醇等，此外，对2个处理系统出水进行GC／MS分析，可知出水中关键毒物基本被去除。     

大气气溶胶中元素种态研究

应用化学逐级提取流程对国际原子能机构（简称IAEA）气溶胶、室内和室外气溶胶、煤飞灰中元素的组成和种态进行了分析，应用仪器中子活化法测定了各种态中元素的含量，计算出元素在各种态中的分配比例。按照气溶胶中元素不同种态的环境和生物活性以及主要来源来分类，评述了元素在环境和生态系统中的吸收和转化能力，并对气溶胶中元素对环境的影响作出了初步的探讨。实验数据表明，气溶胶中的不同元素在各种态中的分布是有差异的。地壳来源元素中，Sc,Al,Fe和Ti主要分布在不溶物态中，稀土元素主要分布在氧化物态和不溶物态；不溶物态沉降到地表后不易进行迁移和转化，对环境的影响较小；氧化物态性质比较活泼，可以在大气中发生化学反应。Mn在气溶胶中主要分布在水可溶态和氧化物态，环境可交换性要比Al,Fe,Ti等大得多。人为来源元素的环境可交换态的比例都比较高，这说明它们通过干、湿清除过程沉降到地表后，水可溶态可以直接进入水循环；碳酸盐、氧化物和有机物态可以在适当的条件下与环境中的其他物质发生化学反应，生成易溶于水的化合物进入生态环境中，对环境影响较大。     

畜禽粪便除臭及生物干燥技术研究进展

综述了近几年来国内外畜禽粪便除臭及脱水技术的研究进展,其中对生物干燥技术的发展进行了比较详细的介绍,以期推动我国畜禽粪便处理技术水平的提高。     

光电测试系统及其在硐室排污通风研究中的应用

介绍了光电微机测试系统的构成、测试原理及其在扁平硐室排污通风实验研究中的应用,并根据模拟实验结果,提出了硐室排污通风风量的通用计算式:Q=β（V/t）In(Co/C)。     

Recycling thin film transistor liquid crystal display (TFT-LCD) waste glass produced as glass–ceramics

The waste electrical and electronic equipment (WEEE) directives are designed to deal with the rapidly increasing waste stream comprised of electrical and electronic equipment. Recycling electrical and electronic equipment reduces the quantity of waste going to final disposal. The demand for thin film transistor liquid crystal display (TFT-LCD) panels, commonly used in everyday electronic products, is increasing. Conventionally adopted treatments of TFT-LCD waste glass cannot meet WEEE directives. This study adopts the following operating conditions in fabricating glass–ceramics: sintering temperature of 800–950 °C; sintering time of 6 h; and, temperature increase rate of 5 °C/min. The glass–ceramic samples then underwent a series of tests, including the Vickers hardness, water absorption and porosity tests, to determine product quality. The Vickers hardness was 12.1 GPa when fired at 900 °C for 6 h, and density was 2.4 g/cm³ and water absorption was 0%. Thus, TFT-LCD waste glass can be regarded as a good glass–ceramic material.