Evaluating households’ preferences regarding reducing power outages in rural areas: cases in the Ganges Floodplain in Bangladesh

This paper investigates household preferences regarding an improved supply of electricity in rural Bangladesh, where the expansion of stable electricity is an urgent policy issue. The paper examines household preferences regarding reductions in the frequency and duration of power outages. It also examines prior notification mechanisms that do not necessarily provide an increased supply of electricity but that allow households to prepare for potential power failures. A questionnaire survey designed as a choice experiment was applied to households to elicit preferences. The econometric analysis reveals that villagers prefer a reduction in both the frequency and duration of power outages and a 1-day prior notification of power outages. There are slight disparities in preferences according to the season and the timing of improvements (e.g., summer or winter and all day or peak hours). Thus, the present study may be beneficial for policymakers when considering the provision of electricity supply improvements in rural areas in exchange for slight increases in electricity tariffs.     

Coherent array of branched filamentary scales along the wing margin of a small moth

In butterflies and moths, the wing margins are fringed with specialized scales that are typically longer than common scales. In the hindwings of some small moths, the posterior margins are fringed with particularly long filamentary scales. Despite the small size of these moth wings, these scales are much longer than those of large moths and butterflies. In the current study, photography of the tethered flight of a small moth, Phthorimaea operculella, revealed a wide array composed of a large number of long filamentary scales. This array did not become disheveled in flight, maintaining a coherent sheet-like structure during wingbeat. Examination of the morphology of individual scales revealed that each filamentary scale consists of a proximal stalk and distal branches. Moreover, not only long scales but also shorter scales of various lengths were found to coexist in each small section of the wing margin. Scale branches were ubiquitously and densely distributed within the scale array to form a mesh-like architecture similar to a nonwoven fabric. We propose that possible mechanical interactions among branched filamentary scales, mediated by these branches, may contribute to maintaining a coherent sheet-like structure of the scale array during wingbeat.     

Changes in peak flow with decreased forestry practices: analysis using watershed runoff data

The prevalence of forestry practices such as thinning and pruning have gradually decreased since the 1980s. Researchers have noted an increased flood risk with decreased forestry practices for coniferous plantations in Japan on the basis of infiltration and overland flow measurements at a plot scale (typically several square meters). However, no studies have examined changes in peak flow with decreased forestry practices at a watershed scale (typically several tens or hundreds of square kilometers) even though flood disasters generally occur at this scale in Japan. We examined changes in frequency distributions of daily precipitation (P) and runoff (Q) during the period 1979-2007 at the Terauchi watershed, where forestry practices are known to have decreased. For this purpose, we divided P and Q data into 14 and 15 classes according to the magnitude, respectively, and examined changes in the frequency for each class during the period. We observed no significant increasing trend for any P or Q class. Even when taking into account the effect of interannual variations in precipitation on the frequency for each Q class, there was no significant increasing trend in the frequencies except for two Q classes with moderate Q values. These results suggest that the increase in flood risk due to decreased forestry practices might be less than expected.     

Assessment of biological effects and harm to Japanese medaka due to carbonized carbon fibers generated by a pyrolysis carbon fiber recycling process

Journal of Material Cycles and Waste Management - Carbon-fiber-reinforced plastics (CFRPs) are used as structural materials in the aircraft and automotive industries owing to their lightweight and...     

Foliage profiles of individual trees determine competition,self-thinning,biomass and NPP of a Cryptomeria japonica forest stand: A simulation study based on a stand-scale process-based forest model

A simulation study was carried out to investigate simultaneously the effects of eco-physiological parameters on competitive asymmetry, self-thinning, stand biomass and NPP in a temperate forest using an atmosphere–vegetation dynamics interactive model (MINoSGI). In this study, we selected three eco-physiological relevant parameters as foliage profiles (i.e. vertical distribution of leaf area density) of individual trees (distribution pattern is described by the parameter η), biomass allocation pattern in individual tree growth (χ) and the maximum carboxylation velocity (V_max). The position of the maximal leaf area density shifts upward in the canopy with increasing η. For scenarios with η < 4 (foliage concentrated in the lowest canopy layer) or η > 12 (foliage concentrated in the uppermost canopy layer), a low degree of competitive asymmetry was produced. These scenarios resulted in the survival of subordinate trees due to a brighter lower canopy environment when η < 4 or the generation of spatially separated foliage profiles between dominant and subordinate trees when η > 12. In contrast, competition between trees was most asymmetric when 4 ≤ η ≤ 12 (vertically widespread foliage profile in the canopy), especially when η = 8. In such cases, vertically widespread foliage of dominant trees lowered the opportunity of light acquisition for subordinate trees and reduced their carbon gain. The resulting reduction in carbon gain of subordinate trees yielded a higher degree of competitive asymmetry and ultimately higher mortality of subordinate trees. It was also shown that 4 ≤ η ≤ 12 generated higher self-thinning speed, smaller accumulated NPP, litter-fall and potential stand biomass as compared with the scenarios with η < 4 or η > 12. In contrast, our simulation revealed small effects of χ or V_max on the above-mentioned variables as compared with those of η. In particular, it is notable that greater V_max would not produce greater potential stand biomass and accumulated NPP although it has been thought that physiological parameters relevant to photosynthesis such as V_max influence dynamic changes in forest stand biomass and NPP (e.g. the greater the V_max, the greater the NPP). Overall, it is suggested that foliage profiles rather than biomass allocation or maximum carboxylation velocity greatly govern forest dynamics, stand biomass, NPP and litter-fall.     

Melting and incineration plants of municipal waste. Chemical and biochemical diagnosis of thermal processing samples (emission,residues)

Control of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) in emissions and thermal residues from incinerators has been a cause of public concern for more than one decade. Recently, several studies showed that other persistent organic pollutants (POPs) such as coplanar polychlorinated biphenyls (co-PCBs) also have dioxin-like activity and are released from incinerators. Therefore, the present study was aimed at making a risk assessment about dioxin-like activity in extracts of thermal waste residues (e.g. combustion gas; fly ash, slag) from incineration and melting processes in Germany and Japan. For this purpose, polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs), coplanar polychlorinated biphenyls (co-PCBs), polychlorinated naphthalenes (PCNs) and polyaromatic hydrocarbons (PAHs) were analyzed by chemical analysis. Additionally, 2, 3, 7, 8-TCDD equivalents (EROD-TEQs) were determined by in vitro Micro-EROD bioassay using rat H4IIE hepatoma cells. EROD-TEQs could be correlated to I-TEQ values (from PCDD/Fs/co-PCBs) analyzed by chemical analysis resulting in a maximal sixfold higher estimate. Our study indicates minor influences of co-PCBs, PAHs and PCNs to the sum of dioxin-like toxicity in the extracts of thermal waste residues as determined here. Furthermore, we showed that the levels of dioxins and co-PCBs contained in slag from melting processes and bottom ashes from incineration processes were lower by 1-2 orders of magnitude than that in fly ash.     

State of mixture of atmospheric submicrometer black carbon particles and its effect on particulate light absorption

The state of mixture of light-absorbing carbonaceous particles was investigated in relation to light absorption properties using electron microscopic examinations, black carbon (BC) analyses of quartz filter by thermal/optical reflectance (TOR) method, measurements with two continuous light-absorbing photometers at a suburban site of Tsukuba, about 60 km northeast of Tokyo. The volume fraction of water-soluble material (?) in individual particles is important for assessing particulate light-absorbing and/or scattering of atmospheric aerosols. The values of ? in BC particles were evaluated by electron micrographs before and after dialysis (extraction) of water-soluble material. The mass absorption coefficient (MAC in units of m² g^?1) tended to increase with increasing the average ? in BC particles with the radius range of 0.05–0.5 μm. Thus, our results indicate that coatings of water-soluble material around BC particles can enhance the absorption of solar radiation. Moreover, the single scattering albedo (SSA) will increase because a large amount of coating material will scatter more light.     

Influence of transportation and pumping on the properties of concrete with large amount of copper slag fine aggregate in actual construction of port and harbor structures

Journal of Material Cycles and Waste Management - Copper slag fine aggregate (CUS) is 30% denser than normal aggregate is an effective material for port and harbor structures demanding high-density...