Characterization and pollution potential assessment of Tunceli, Turkey municipal solid waste open dumping site leachates

Environmental monitoring of leachate quality from an open municipal solid waste dumping site in Tunceli, Turkey was studied in this research. The most commonly examined pollution parameters were determined on a seasonal basis. The annual average 5-day biological oxygen demand (BOD₅) and chemical oxygen demand (COD) values of station points were measured as 70 and 425 mg/L, respectively, and also the average BOD₅/COD ratio (a measure of biodegradability) was calculated as 0.20. The low ratio of biodegradability and slightly alkaline pH values in the leachate samples indicated that the site was characterized by methanogenic conditions. The mean ammonium-nitrogen (NH₄ ⁺-N) and corresponding phosphate (orthophosphate) values were assayed as 70 and 11 mg/L, respectively. The average solids content in the leachates was measured as 4,681 mg/L (total solids) and 144 mg/L (suspended solids). Very low concentrations of iron, manganese, copper, and zinc in the leachate samples were found and the concentration of cadmium was measured below detection limits. Excessive amount of nutrients and high organic and inorganic pollutant content in the leachates pose serious pollution potential to the environment. Since no drainage system or bio treatment exists in this open dumping site, high permeability of natural soil at the site and in the surrounding area and very fractured and crackled rocks under natural soil are indicators of high groundwater pollution potential in this site.     

Biochemical properties of some Salvia L. species

Antioxidant capacity, total phenol and mineral contents of aerial parts of sage belonging to some Salvia species were established. The lowest and highest antioxidant values of Salvia dichroantha Stapf and Salvia heldreichiana Boiss. ex Benth. extracts were found as 73.855 and 80.207 mg GAE/g, respectively. While the highest total phenol was established in Salvia tomentosa Mil. (13.316 mg GAE/100 ml), the lowest level was found in Salvia halophila Hedge (6.168 mg GAE/100 ml). While K contents of plants changed between 14,518 and 24,171 mg/kg, Ca contents ranged between 12,402 and 18,553 mg/kg. P and Mg contents were found low compared with K and P values of plants. Mg content was changed between 2,118 and 2,914 mg/kg; the mean was calculated as 2,496 mg/kg. P contents of plants were determined between 1,385 to 1,910 mg/kg. As a microelement, Fe was found at the highest level. Fe contents of plants were found between 179 and 782 mg/kg.     

Measurement of Traffic Related Toxic Air Pollutants in an Urban Atmosphere

Nose-level measurements of air toxics were made along a busy urban street in Ottawa, Canada for 2 hr periods during morning, noon, and afternoon rush hours in the winter and summer of 2000. Measurements were also made in a commuter car and a transit bus during morning and afternoon commutes in 2000. The main objectives of the study were to establish a database, to determine temporal and seasonal variations and to determine the contribution of motor vehicle traffic to the measured toxic substance concentrations. Ottawa is an appropriate choice of location for the measurement of motor vehicle related toxic and reactive compounds, as it has virtually no industrial sources that could be contributing to the ambient loadings. Samples were collected for a total of 165 volatile organic compounds and 25 carbonyl compounds. Sampling and analytical methodologyare discussed and results are presented. Toluene, ethylene andformaldehyde were the most abundant pollutants in Ottawa during both winter and summer. Total non-methane hydrocarbon concentrationwas measured as 100 g m^-3 at nose-level measurements in Ottawa.     

Using of leaching reactant obtained from mill scale in hydrometallurgical copper extraction

Environmental Science and Pollution Research - This study, which covered a set of leaching processes at a few stages, investigated the inclusion of iron found in mill scale, which is a waste of the...     

Thermal behaviors, combustion mechanisms, evolved gasses, and ash analysis of spent potlining for a hazardous waste management

An unavoidable but reusable waste so as to enhance a more circular waste utilization has been spent potlining (SPL) generated by the aluminum industry. The combustion mechanisms, evolved gasses, and ash properties of SPL were characterized dynamically in response to the elevated temperature and heating rates. Differential scanning calorimetric (DSC) results indicated an exothermic reaction behavior probably able to meet the energy needs of various industrial applications. The reaction mechanisms for the SPL combustion were best described using the 1.5-, 3- and 2.5-order reaction models. Fluoride volatilization rate of the flue gas was estimated at 2.24%. The SPL combustion emitted CO₂, HNCO, NO, and NO₂ but SO_x. The joint optimization of remaining mass, derivative thermogravimetry, and derivative DSC was achieved with the optimal temperature and heating rate combination of 783.5°C, and 5 °C/min, respectively. Interaction between temperature and heating rate exerted the strongest and weakest impact on DSC and remaining mass, respectively. The fluorine mainly as the formation of substantial NaF and CaF₂ in the residual ash. Besides, the composition and effect of environment of residual solid were evaluated. The ash slagging tendency and its mineral deposition mechanisms were elucidated in terms of turning SPL waste into a benign input to a circular waste utilization.     

Recycling the low-density polyethylene pellets in the pervious concrete production

Journal of Material Cycles and Waste Management - The main target of this study is to experimentally investigate the possibility of recycling of low-density polyethylene (LDPE) pellets as aggregate...     

Analysing land cover changes for understanding of forest dynamics using temporal forest management plans

This study analyses forest dynamics and land use/land cover change over a 43-year period using spatial-stand-type maps of temporal forest management plans of Karaisal? Forest Enterprise in the Eastern Mediterranean Region of Turkey. Stand parameters (tree species, crown closures and developmental stages) of the dynamics and changes caused by natural or artificial intervention were introduced and mapped in a Geographic Information System (GIS) and subjected to fragmentation analysis using FRAGSTATS. The Karaisal? Forest Enterprise was first planned in 1969 and then the study area was planned under the Mediterranean Forest Use project in 1991 and five-term forest management plans were made. In this study, we analysed only four periods (excluding 1982 revision plans): 1969, 1991, 2002 and 2012. Between 1969 and 2012, overall changes included a net increase of 3,026 ha in forested areas. Cumulative forest improvement accounted for 2.12 % and the annual rate of total forest improvement averaged 0.08 %. In addition, productive forest areas increased from 36,174 to 70,205 ha between 1969 and 2012. This translates into an average annual productive forest improvement rate of 1.54 %. At the same time, fully covered forest areas with crown closure of “3” (>70 %) increased about 21,321 ha, and young forest areas in developmental stage of “a” (diameter at breast height (dbh)?<?8 cm) increased from 716 to 13,305 ha over the 43-year study period. Overall changes show that productive and fully covered forest areas have increased egregiously with a focus on regenerated and young developmental stages. A spatial analysis of metrics over the 43-year study period indicated a more fragmented landscape resulting in a susceptible forest to harsh disturbances.     

Formation of Disinfection Byproducts (DBPs) in Surface Water Sources: Differential Ultraviolet (UV) Absorbance Approach

Chlorination for drinking water forms various disinfection byproducts (DBPs) of trihalomethanes (THMs) and haloacetic acids (HAAs). Chlorination has been attributed to the destruction of activated aromatic sites of the natural organic matter (NOM) predominantly at electron rich sites. Experiments with Istanbul surface waters showed that the magnitude of the decrease in the ultraviolet (UV) absorbance at 272 nm (UV₂₇₂) was an excellent indicator of destruction of these sites by chlorine. The main objective of the present study is to develop the differential UV₂₇₂ absorbance (ΔUV₂₇₂) related models for the prediction of the formation of THM, HAA, and their species in raw water samples from Terkos, Buyukcekmece, and Omerli lakes under different chlorination conditions. Significant factors affecting DBP formation in the raw waters were identified through numerical and graphical techniques. The R² values of the models varied between 0.94 and 0.97, indicating excellent predictive ability for THM₄ and HAA₉ in the raw waters. The models were validated using additional data. The results of this study concluded that addition of ΔUV₂₇₂ parameter into THM₄ and HAA₉ models make the prediction of these DBP compounds more precisely than those of DBP models developed in the past. A better understanding of these modeling systems will help the water treatment plant operators to minimize the DBP formation, providing a healthier and better drinking water quality as well as identifying strategies to improve water treatment and disinfection processes.     

Estimation of shipping emissions in Candarli Gulf, Turkey

Ships are significant air pollution sources as their high powered main engines often use heavy fuels. The major atmospheric components emitted are nitrogen oxides, particulate matter (PM), sulfur oxide gases, carbon oxides, and toxic air pollutants. Shipping emissions cause severe impacts on health and environment. These effects of emissions are emerged especially in territorial waters, inland seas, canals, straits, bays, and port regions. Candarli Gulf is one of the major industrial regions on the Aegean side of Turkey. The marine environment of the region is affected by emissions from ships calling to ten different ports. In this study, NO _x , SO₂, CO₂, hydrocarbons (HC), and PM emissions from 7,520 ships are estimated during the year of 2007. These emissions are classified regarding operation modes and types of ships. Annual shipping emissions are estimated as 631.2 t year^???1 for NO _x , 573.6 t year^???1 for SO₂, 33,848.9 t year^???1 for CO₂, 32.3 t year^???1 for HC, and 57.4 t year^???1 for PM.