Air pollution forecasting in Ankara, Turkey using air pollution index and its relation to assimilative capacity of the atmosphere

A conditional time-averaged gradient (COTAG) system has been developed to provide direct long-term (weekly to monthly) average flux gradient measurements for a range of trace gases, between land and atmosphere. Over daily periods, atmospheric conditions can range from high stability, where the vertical gradients of ambient concentration are enhanced due to very small diffusivity, to highly unstable conditions, in which concentration gradients are small due to the intense turbulent activity of the surface layer. The large vertical gradients generated by high stability would bias the estimate of the actual flux: to avoid this, the COTAG system samples conditionally, within a carefully refined range of stability. A comparison with a continuous flux gradient system suggested that the removal of stable conditions from the sampling period does not substantially modify the evaluation of the long-term fluxes.     

A very sensitive flow-injection spectrophotometric determination method for iron (II) and total iron using 2′, 3, 4′, 5, 7-pentahydroxyflavone

In this study, an ultra-sensitive and highly selective, rapid flow-injection spectrophotometric method for the determination of iron (II) and total iron has been proposed. The method was based on the reaction between iron (II) and 2′, 3, 4′, 5, 7-pentahydroxyflavone in slightly acidic solution with a strong absorption at 415 nm. The carrier solution used was 1?×?10^?5 M 2′, 3, 4′, 5, 7-pentahydroxyflavone in 0.1 M HAc/Ac^? buffer solution at pH 4.5. Parameters that affect simultaneously the determination of iron (II) and interfering ions were tested. The relative standard deviation for the determination of 50 μg L^?1 iron (II) was 0.85 % (n?=?10), and the limit of detection (blank signal plus three times the standard deviation of the blank) was 3 μg L^?1, both based on injection volumes of 20 μL. The method has been successfully applied to the determination of iron (II) and total iron in water samples and ore samples. The method was verified by analysing a certified reference material Zn/Al/Cu 43XZ3F.     

Sorption of alpha and beta hydrophobic endosulfan in a Vertisol from southeast region of Turkey

Endosulfan has been applied to control numerous insects in a variety of food and non-food crops. Limited information is available on dynamics of this pesticide in the soil. The objective of this research was to determine the adsorption–desorption behavior of the alpha (α) and beta (β) endosulfan in a Vertisol from the southeast region of Turkey, where cotton is the main crop in the large irrigated lowlands. The α and β endosulfan were adsorbed considerably and Freundlich adsorption–desorption isotherms fitted the α and β endosulfan data (R² > 0.98). Freundlich adsorption coefficients (K_f) for the α endosulfan ranged between 21.63 and 16.33 while for the β endosulfan they were between 14.01 and 17.98 for the Ap and Bw2 horizons. The difference of K_f values of α and β endosulfan for two horizons were explained with the slight difference in the amount of organic matter and clay, but considerable difference in Fe contents of the two horizons. Alpha and β endosulfan K_fd values were 118.03 and 45.81 for the Ap and 48.08 and 68.71 for the Bw2 horizons. Higher adsorption and desorption behavior of the endosulfan isomers for the same horizon was attributed to poor physical bonding between the endosulfan molecule and the surfaces of fundamental soil particles. This fact is thought to increase the effective use of endosulfan in agriculture with a possibility of its movement to the surface and groundwater in the Vertisol studied.     

Development of an efficient and sensitive analytical method for the determination of copper at trace levels by slotted quartz tube atomic absorption spectrometry after vortex-assisted dispersive liquid-liquid microextraction in biota and water samples using a novel ligand

This study describes the determination of trace levels of copper by slotted quartz tube atomic absorption spectrometry after dispersive liquid-liquid microextraction. A ligand synthesized from the reaction of salicylaldehyde and 1-naphthylamine was used to form coordinate copper complex prior to extraction. All parameters that influence the output of complex formation, extraction, and instrumental measurement were optimized to enhance the absorbance signal of copper. Under the optimum conditions, about 104-fold enhancement in sensitivity was recorded over the conventional flame atomic absorption spectrometer, corresponding to a 0.51 ng/mL detection limit. The percent relative standard deviation calculated for the lowest concentration (4.8%) indicated high precision for the experimental procedure. Accuracy and applicability of the optimum method were determined by performing spiked recovery tests on urine, lake water, and mineral water samples. Satisfactory recovery results were obtained between 82.2 and 106.3% at four different concentrations. Matrix matching method was also performed to increase the accuracy of quantification, and the percent recovery calculated for 175 ng/mL was 105.14%.     

The effect of cyclic aerobic-anoxic conditions on biodegradation of benzoate.

The response of a mixed microbial culture to cyclic aerobic and anoxic (denitrifying) conditions was studied in a chemostat with a 48-hour hydraulic residence time receiving a feed containing benzoate and pyruvate. When the cyclic conditions were 3-hour aerobic and 9-hour anoxic, the bacteria-degraded benzoate aerobically via the catechol 2,3-dioxygenase (C23DO) pathway. The quantity of C23DO remained constant throughout the anoxic period but decreased during the initial portion of the aerobic period before returning to the level present in the anoxic period. Anoxic biodegradation of benzoate was via benzoyl-CoA reductase, which remained constant regardless of the redox condition. The aerobic benzoate uptake capability (AeBUC) of the culture increased during the aerobic period but decreased during the anoxic period. The anoxic benzoate uptake capability (AnBUC) exhibited the opposite response. When the cycle was 6-hour aerobic and 6-hour anoxic, aerobic biodegradation of benzoate proceeded via the protocatechuate 4,5-dioxygenase (P45DO) pathway. The P45DO activity decreased early in the aerobic period, but then increased to the level present during the anoxic period. The level of benzoyl-CoA reductase was constant throughout the cycle. Furthermore, AeBUC and AnBUC responded in much the same way as in the 3/9-hour chemostat. During a 9-hour aerobic and 3-hour anoxic cycle, the culture synthesized both P45DO and C23DO, with the former having significantly higher activity. Unlike the other two cycles, AeBUC changed little during the aerobic period, although AnBUC decreased. The culture was well-adapted to the cyclic conditions as evidenced by the lack of accumulation of either substrate during any cycle tested. This suggests that cyclic aerobic-anoxic processes can be used in industrial wastewater-treatment facilities receiving significant quantities of simple aromatic compounds like benzoate. However, the results showed that the kinetics of benzoate degradation were different under aerobic and anoxic conditions, a situation that must be considered when modeling cyclic bioreactors receiving aromatic compounds.     

Effect of temperature on seawater desalination-water quality analyses for desalinated seawater for its use as drinking and irrigation water

The effect of feed seawater temperature on the quality of product water in a reverse osmosis process was investigated using typical seawater at Urla Bay, Izmir region, Turkey. The tests were carried out at different feed seawater temperatures (11–23°C) using two RO modules with one membrane element each. A number of variables, including pH, conductivity, total dissolved solids, salinity, rejection percentage of a number of ions (Na⁺, K⁺, Ca²⁺, Mg²⁺, Cl⁻, HCO₃ ⁻, and SO₄ ²⁻), and the levels of boron and turbidities in collected permeates, were measured. The suitability of these permeates as irrigation and drinking water was checked by comparison with water quality standards.     

Feeding and non-feeding aggression can be induced in invasive shore crabs by altering food distribution

Human activity can have a large impact on surrounding ecosystems. For example, humans alter resource distributions for other species, potentially modifying these species competitive dynamics. These changes in local competitive processes are frequently associated with species invasions. Here, we investigate how differences in resource distribution affect competitive behaviour using the highly invasive European shore crab (Carcinus maenas). Using a controlled laboratory experiment in combination with behaviour assays and social network analysis, we show that individuals feeding in habitats with clumped food distributions are more aggressive than individuals feeding in habitats where food is evenly dispersed, and this aggression is present even on days where crabs are not feeding. Additionally, this persistent aggression can be induced, suggesting that individuals of this invasive species possess the flexibility to modify their competitive behaviours in response to differences in food distributions. Furthermore, we show how these individual responses can lead to changes in overall organisation of aggressive interactions within a population. We discuss these results in relation to how human impacts can have long-term effects on competitive behavioural strategies, and how behavioural flexibility can allow invasive species to colonise and persist in highly impacted sites such as urban ecosystems.     

The impact of COVID-19 pandemic in medical waste amounts: a case study from a high-populated city of Turkey

Journal of Material Cycles and Waste Management - In this study, the amount of medical waste generated in a high-populated city in Turkey between January 2018 and August 2021 was evaluated, and the...     

Solidification/stabilization of landfill leachate concentrate using different aggregate materials

The application of reverse osmosis for the treatment of landfill leachate is becoming widespread in Turkey as well as in Europe. A major drawback of this process is the production of concentrate, which could be as much as 30% of the feed stream, and high concentrations of salts and contaminants. The reverse osmosis concentrate is disposed of by using several methods including re-infiltration, drying, incineration and solidification/stabilization. In this study, solidification/stabilization (S/S) technology was studied for the treatment of reverse osmosis concentrate produced from landfill leachate. In order to benefit from its capability to absorb heavy metals, ammonia and some other pollutants, zeolite and different aggregate materials were used in solidification experiments. Main pollutants in the leachate concentrate, TOC, DOC, TDS and ammonia were successfully solidified and approximately 1% of TOC, DOC, TDS and ammonia remained in the eluate water. The results indicated that the landfill disposal limits could be attained by solidification/stabilization process.     

The microbial community in a green turtle nesting beach in the Mediterranean: application of the Biolog EcoPlate approach for beach pollution

Environmental Science and Pollution Research - This study aims to characterize the microbial community and its relationship with heavy metal pollution in the beaches of Sugözü, an...