A review of bioretention components and nutrient removal under different climates—future directions for tropics

Bioretention systems have been implemented as stormwater best management practices (BMPs) worldwide to treat non-point sources pollution. Due to insufficient research, the design guidelines for bioretention systems in tropical countries are modeled after those of temperate countries. However, climatic factors and stormwater runoff characteristics are the two key factors affecting the capacity of bioretention system. This paper reviews and compares the stormwater runoff characteristics, bioretention components, pollutant removal requirements, and applications of bioretention systems in temperate and tropical countries. Suggestions are given for bioretention components in the tropics, including elimination of mulch layer and submerged zone. More research is required to identify suitable additives for filter media, study tropical shrubs application while avoiding using grass and sedges, explore function of soil faunas, and adopt final discharged pollutants concentration (mg/L) on top of percentage removal (%) in bioretention design guidelines.

     

The Representation of Biofuels in Political Cartoons: Ironies,Contradictions and Moral Dilemmas

Biofuels are an important component in the suite of renewable energy alternatives but their development trajectory has been fraught with controversy. This study investigated the representation of biofuels in political cartoons on the Internet. Political cartoons have relied on informative, persuasive, and performative attributes to engender critical reflection and mobilize action. We analyzed a corpus of 130 relevant cartoons obtained through Google Images which were then thematically categorized. The problems highlighted in these cartoons focused on the social injustices arising from the diversion of food sources to fuel, the environmental destruction arising from deforestation, the unfulfilled expectations for climate change mitigation, and the policy contradictions that emerged. We suggest that political cartoons’ discursive dimensions allow us to make immediate connections between the image and our cultural stores of meaning, while at the same time further elucidate the dilemmas and contradictions embedded in the public's interface with biofuels as an environmental issue.     

Application of chemometrics in understanding the spatial distribution of human pharmaceuticals in surface water

The growing interest in the environmental occurrence of veterinary and human pharmaceuticals is essentially due to their possible health implications to humans and ecosystem. This study assesses the occurrence of human pharmaceuticals in a Malaysian tropical aquatic environment taking a chemometric approach using cluster analysis, discriminant analysis and principal component analysis. Water samples were collected from seven sampling stations along the heavily populated Langat River basin on the west coast of peninsular Malaysia and its main tributaries. Water samples were extracted using solid-phase extraction and analyzed using liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS) for 18 pharmaceuticals and one metabolite, which cover a range of six therapeutic classes widely consumed in Malaysia. Cluster analysis was applied to group both pharmaceutical pollutants and sampling stations. Cluster analysis successfully clustered sampling stations and pollutants into three major clusters. Discriminant analysis was applied to identify those pollutants which had a significant impact in the definition of clusters. Finally, principal component analysis using a three-component model determined the constitution and data variance explained by each of the three main principal components.     

Waste high impact polystyrene (HIPS) microfiltration membranes for water treatment: A thorough experimental study

In our previous work, the prepared high-impact polystyrene (HIPS) membranes, synthesized using four concentrations (20, 25, 30, and 35 wt%) of waste HIPS, were proved to be promising for water purification by microfiltration process (MF). However, the fabricated membranes' mechanical properties and microfiltration process parameters were not investigated. Consequently, in this study, various parameters affecting the previously fabricated membranes' performance in the filtration process, such as membrane mechanical properties, feeding pressure, fouling behavior, and polymer concentration, were thoroughly investigated. With increasing polystyrene concentrations, the ultimate tensile strength of the fabricated membranes increased. When the concentration was increased from 20 to 25 wt percent, the elongation at break rose, but as the concentration was increased further, the membrane became brittle. Permeate flux and rejection both declined as polymer content was raised. Accordingly, the highest flux and humic acid (HA) rejection were shown by 20 wt% (14.18 L/m²h (LMH) and 98.95%, respectively). The antifouling properties declined when the polymer concentration was raised, and 20 wt% had the lowest total fouling resistance. Furthermore, the permeate flux was reduced while increasing the HA initial concentration.     

Solar still with rotating parts: a review

Environmental Science and Pollution Research - Access to freshwater is narrowed down every day in the world. Many diseases of human beings are related to water supplies contaminated or unpurified....     

Direct utilization of kitchen waste for bioethanol production by separate hydrolysis and fermentation (SHF) using locally isolated yeast

Kitchen wastes containing high amounts of carbohydrates have potential as low-cost substrates for fermentable sugar production. In this study, enzymatic saccharification of kitchen waste was carried out. Response surface methodology (RSM) was applied to optimize the enzymatic saccharification conditions of kitchen waste. This paper presents analysis of RSM in a predictive model of the combined effects of independent variables (pH, temperature, glucoamylase activity, kitchen waste loading, and hydrolysis time) as the most significant parameters for fermentable sugar production and degree of saccharification. A 100 mL of kitchen waste was hydrolyzed in 250 mL of shake flasks. Quadratic RSM predicted maximum fermentable sugar production of 62.79 g/L and degree of saccharification (59.90%) at the following optimal conditions: pH 5, temperature 60°C, glucoamylase activity of 85 U/mL, and utilized 60 g/L of kitchen waste as a substrate at 10 h hydrolysis time. The verification experiments successfully produced 62.71 ± 0.7 g/L of fermentable sugar with 54.93 ± 0.4% degree of saccharification within 10 h of incubation, indicating that the developed model was successfully used to predict fermentable sugar production at more than 90% accuracy. The sugars produced after hydrolysis of kitchen waste were mainly attributed to monosaccharide: glucose (80%) and fructose (20%). The fermentable sugars obtained were subsequently used as carbon source for bioethanol production by locally isolated yeasts: Saccharomyces cerevisiae, Candida parasilosis, and Lanchancea fermentati. The yeasts were successfully consumed as sugars hydrolysate, and produced the highest ethanol yield ranging from 0.45 to 0.5 g/g and productivity between 0.44 g L^–1 h^–1 and 0.47 g L^–1 h^–1 after 24-h incubation, which was equivalent to 82.06–98.19% of conversion based on theoretical yield.     

Protective effects of Persea americana fruit and seed extracts against chemically induced liver cancer in rats by enhancing their antioxidant,anti-inflammatory,and apoptotic activities

Environmental Science and Pollution Research - This study aims to explore the chemopreventive mechanisms of hydroethanolic extracts from avocado (Persea Americana) in diethylnitrosamine...     

Recycling phosphorus and calcium from aquaculture waste as a precursor for hydroxyapatite (HAp) production: a review

Environmental Science and Pollution Research - Water contaminated with phosphorus needs to be managed efficiently to ensure that clean water sources will be preserved. Aquaculture plays an...     

Enhanced photocatalytic degradation of malachite green dye by highly stable visible-light-responsive Fe-based tri-composite photocatalysts

Environmental Science and Pollution Research - A novel visible-light-sensitive ZnVFeO4 photocatalyst has been fabricated by the precipitation method at different pH values for the enhanced...     

Blending of Epoxidised Palm Oil with Epoxy Resin: The Effect on Morphology, Thermal and Mechanical Properties

Epoxy resin prepared by the reaction of a diglycidyl ether of bisphenol A (DGEBA) and m-xylylenediamine (m-XDA) was modified with 10% wt of epoxidized palm oil (EPO). The EPO was first pre-polymerized with m-XDA at various temperatures and reaction times. The resulting product was then mixed with the epoxy resin at 40?°C and allowed to react at 120?°C for another 3?h. The fully reacted DGEBA/m-XDA/EPO blend was characterized by using scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermal gravimetric analysis, tensile test, hardness indentation and dynamic mechanical analysis. The SEM study shows that different types of morphology, ranging from phase separated to miscible blends were obtained. A miscible blend was obtained when the m-XDA and EPO were reacted for more than 2?h. The results from DSC analysis show that the incorporation of EPO at 10% wt in the epoxy blend reduced the glass transition temperature (T _g). The lowered T _g and mechanical properties of the modified epoxy resins are caused by a reduction in crosslinking density and plasticizer effect.