Performance Enhancement of a Beta Type Rhombic Drive Stirling engine

ABSTRACT

Stirling engines maintain attraction because of their high energy conversion efficiencies. In this study, experimental comparison of a beta-type Stirling engine for two different rhombic-drive mechanisms was presented. In one of the rhombic mechanisms, spur gears were used and the gear shaft was supported in bearings from one side. In the other mechanism, two helical gears were placed on crankshafts and the crankshafts were supported in bearings from both sides. Rhombus lengths of the mechanisms were determined as 66 mm and 80 mm to provide same constant compression ratio of 2.5 for both configurations. Both mechanisms were used in the same beta-type Stirling engine having same cylinder, piston and displacer dimensions. Performance parameters of the engines were evaluated at different helium charge pressures (2–4 bar) and hot-end temperatures (400–600°C). The hot-end of the displacer cylinder was heated by a liquefied petroleum gas (LPG) burner. The engine power increased by 132%, friction losses and gear noses were reduced by supporting the rhombic-drive mechanism from both side and using helical gears. The maximum output torque and power of the engine were obtained as 13.14 Nm at 428 rpm engine speed and 663 W at 800 rpm engine speed, respectively, at 600°C hot-end temperature and 4 bar charge pressure.     

Identification of ecologically significant habitats for urban nature conservation: a case study in Turkey

Given the rapid urbanization of Turkey, sustained productivity of natural resources should be an integral part of any urban development policy. The biogeochemical cycles and ecosystem services link urban and rural ecosystems. It is, therefore, essential that ecologically significant habitats along urban-rural continuum be protected to secure public and environmental health. This necessitates their identification and the establishment of administrative and legal foundations for urban nature conservation in the management of urban habitats, should be established Ecological analysis of urban habitats of Kar?iyaka led to the identification of 19 ecologically significant habitats. Nature conservation priority was rated, using rarity, species richness, stratification, site age, and area of the habitats. Ecologically significant habitats made up about 54 ha of the total urban green space of 289 ha in Kar?iyaka. The total number of plant species was estimated to be 273.     

Assessing Major Ecosystem Types and the Challenge of Sustainability in Turkey

In recent years, Turkey has experienced rapid economic and population growth coupled with both an equally rapid increase in energy consumption and a vast disparity in welfare between socioeconomic groups and regions. In turn, these pressures have accelerated the destruction of productive, assimilative, and regenerative capacities of the ecosystems, which are essential for the well-being of the people and the economy. This paper describes the structure and function of major ecosystem types in Turkey and discusses the underlying causes of environmental degradation in the framework of economy, energy, environment, and ethics. From a national perspective, this paper suggests three sustainability-based policies necessary for Turkey's long-term interests that balance economic, environmental, and energy goals: (1) decoupling economic growth from energy consumption growth through the development of energy-efficient and renewable energy technologies; (2) linking economic efficiency and distributive justice of wealth and power through distributive and participatory public policies; and (3) integrating the economic and ecological systems through the internalization of externalities and ecosystem rehabilitation.     

Effects of potassium humate solution and soaking periods on germination characteristics of undelinted cotton seeds (Gossypium hirsutum L.)

The present study was conducted to determine the effects of soaking in potassium humate (PH) solution (55% humic acid, 30% fulvic acid and 8% potassium hydroxide) and distilled water (DW) for different periods (0, 4, 8 and 16 hours) on germination characteristics of undelinted seeds of cotton cv Ersan-92. Radicle, hypocotyl and seedling length, radicle and hypocotyl elongation rate and vigor index increased by PH solution treatment and increasing soaking periods. The medium x soaking period interactions were significant except for germination percentage. Sixteen hour soaking period gave the highest values of investigated characteristics. It is suggested that pre-sowing PH solution treatment may be useful to provide a good stand establishment.     

Sustainability assessment of existing onshore wind plants in the context of triple bottom line: a best-worst method (BWM) based MCDM framework

Environmental Science and Pollution Research - Not only the steadily growing demand for electricity generation but also the environmental concerns in recent years have led to the belief in the...     

Assessing monthly average solar radiation models: a comparative case study in Turkey

Solar radiation data are required by solar engineers, architects, agriculturists, and hydrologists for many applications such as solar heating, cooking, drying, and interior illumination of buildings. In order to achieve this, numerous empirical models have been developed all over the world to predict solar radiation. The main objective of this study is to examine and compare 147 solar radiation models available in the literature for the prediction of monthly solar radiation at Ankara (Turkey) based on selected statistical measures such as percentage error, mean percentage error, root mean square error, mean bias error, and correlation coefficient. Our results showed that Ball et al. (Agron J 96:391?C397, 2004) model and Chen et al. (Energy Convers Manag 47:2859?C2866, 2006) model performed best in the estimation of solar radiation on a horizontal surface for Ankara.     

Experimental investigation of cross-shore sandbar volumes

Sandbars are critical to the cross-shore movement of sediment. Prediction of cross-shore sandbar volumes requires knowledge about the functional relationship of sediment transport rate conditions with waves, currents, base slope, sediment property and water depth. In this study, experiments on cross- shore sediment transport were carried out in a laboratory wave channel for initial base slopes of 1/8, 1/10 and 1/15. Using regular waves with different deep-water wave steepness generated by a pedal-type wave generator, bar volumes caused by cross-shore sediment transport are investigated for beach materials with the medium diameter of d₅₀?=?0.25, 0.32, 0.45, 0.62 and 0.80 mm. A non-dimensional equation for sandbar volume was obtained by using linear and non-linear regression methods through the experimental data and was compared with previously developed equations in the literature. The results have shown that the experimental data fitted well to the proposed equation with respect to the previously developed equations.     

Comparison of phytotoxic effects of bio-synthesised copper oxide nanoparticle and ionic copper on Elodea canadensis

This study aims to investigate the phytotoxic effects of both Punica granatum peel extract directed copper oxide nanoparticles (CuONPs) and copper nitrate on Elodea canadensis. The CuONPs were characterised by UV–visible spectroscopy (UV-Vis), Dynamic Light Scattering (DLS), X-ray Diffraction (XRD), Scanning Electron Microscope (SEM), and Fourier Transform Infrared (FT-IR) Spectroscopy. The ratio of photosynthetic pigments, total soluble protein, malondialdehyde (MDA), catalase (CAT), ascorbate peroxidase (APX), and copper accumulation in the E. canadensis was determined to evaluate the phytotoxicity of the CuONPs and copper nitrate on E. canadensis. The significant improvements were observed in the growth rate of E. canadensis, chlorophyll a and b, carotenoid contents, and total soluble protein in the E. canadensis when it was exposed to the CuONPs. Additionally, CAT and APX activities and MDA contents were enhanced by accumulation of the CuONPs into the E. canadensis. These results suggested that oxidative stress was alleviated, owing to the result of an increase in the antioxidants such as CAT and APX, with an increase in the concentration of the CuONPs. Finally, the findings of this study show that copper nitrate has many negative effects on E. canadensis compared bio-synthesised CuONPs.     

Mapping of bioclimatic comfort for potential planning using GIS in Aydin

People are relaxed (satisfied or well-off) in what is described as comfortable climatic conditions. In such conditions, a person’s energy balance is not disturbed because of stresses from extreme heat or cold. Bioclimatic structure has been well researched and should be a consideration in the planning process for arranging comfortable spaces. It represents the understanding that energy balance is one of the basic elements of a sustainable landscape design. The goals of this study have been to create ideal places for human thermal comfort and to advance objectives focused on the importance of sustainable and ecological landscape planning and design work, along with their accompanying economic benefits. In this study, which focuses on the climate of the Province of Aydin, the most suitable areas for bioclimatic comfort have been identified. The climate values for the Aydin Province have been taken from a total of 22 meteorological stations. Stations at altitudes ranging from 11 to 871 m were used to note the climate changes that occurred. The average temperature, relative humidity, and wind speed from each station, including data collected using Geographic Information System (GIS) software, were transferred. GIS maps were then created from the imported data, and areas of optimal comfort around the city of Aydin were determined. The results show the range that is suitable for a bioclimatic comfort zone in Aydin. The bioclimatic comfort range was determined to be roughly 17 °C for Aydin, and the city of Aydin demonstrated a comfort range between 14 and 19 °C. As a result, the city of Aydin was shown to be a suitable area for bioclimatic comfort.     

Efficiency of Modified Composite Biosorbent for Bioremoval of Phosphate Ions in Aqueous Area: Process Modeling Studies

This paper was focused on the biosorption of phosphate ions from aqueous solution onto the cetyltrimethylammonium bromide (CTAB) modified multi-component biosorbent composed of pine, oak, hornbeam and fir sawdust biomasses. A series of batch tests were conducted and the effects of solution pH, ion concentration, quantity of biosorbent and contact time on the bioremoval of phosphate ions were investigated. The biosorption data of kinetic and equilibrium were modeled using various mathematical equations. The phosphate removal increased with increased ion concentration and decreased with increased pH and biosorbent quantity values. The equilibrium state was reached within 120 min of exposure time. The process kinetics was best described by Elovich model while the isotherm data of biosorption best obeyed Freundlich equation. The obtained results revealed that the use of CTAB modified mix sawdust biosorbent presented interesting options for bioremediation of contaminated environments and waste recycling (as nutrient fertilizer and compost material).