Agricultural Land Use Effects on Sediment Loading and Fish Assemblages in Two Minnesota (USA) Watersheds

We examined the relationship between water quality and fish communities within two agricultural areas using a computer simulation model. Our analyses focused on a coolwater stream, Wells Creek in southeastern Minnesota, and a warmwater stream, the Chippewa River in western Minnesota. We used the Agricultural Drainage and Pesticide Transport (ADAPT) model in relation to land use to calculate instream suspended sediment concentrations using estimates of sediment delivery, runoff, baseflow and streambank erosion, and quantified the effects of suspended sediment exposure on fish communities. We predicted the effects of agricultural practices on stream fish communities under several possible land use scenarios, with reference to current conditions. Land use changes led to reductions in sediment loading of up to 84% in Wells Creek and 49% in the Chippewa River. The reduction in sediment loading across scenarios may be directly related to a reduction in runoff by about 35% in both study areas. We found a 98% decrease in lethal concentrations of suspended sediment on fish in Wells Creek with an increase in conservation tillage, riparian buffers, and permanent vegetative cover. However, the effects of suspended sediment did not significantly decrease in the Chippewa River. This difference between study areas was likely due to differences in tolerance to suspended sediment between coolwater and warmwater fish communities and differences in topography, runoff and bank erosion between the two streams. The Minnesota Cooperative Fish and Wildlife Research Unit is jointly sponsored by the US Geological Survey, the University of Minnesota, the Minnesota Department of Natural Resources, and the Wildlife Management Institute.     

Application of Multiattribute Decision-Making Methods for the Determination of Relative Significance Factor of Impact Categories

A relative significance factor (f _i ) of an impact category is the external weight of the impact category. The objective of this study is to propose a systematic and easy-to-use method for the determination of f _i . Multiattribute decision-making (MADM) methods including the analytical hierarchy process (AHP), the rank-order centroid method, and the fuzzy method were evaluated for this purpose. The results and practical aspects of using the three methods are compared. Each method shows the same trend, with minor differences in the value of f _i . Thus, all three methods can be applied to the determination of f _i . The rank order centroid method reduces the number of pairwise comparisons by placing the alternatives in order, although it has inherent weakness over the fuzzy method in expressing the degree of vagueness associated with assigning weights to criteria and alternatives. The rank order centroid method is considered a practical method for the determination of f _i because it is easier and simpler to use compared to the AHP and the fuzzy method.     

Comparison of Hydrology of Wetlands in Pennsylvania and Oregon (USA) as an Indicator of Transferability of Hydrogeomorphic (HGM) Functional Models Between Regions

The hydrogeomorphic (HGM) approach to wetland classification and functional assessment is becoming more widespread in the United States but its use has been limited by the length of time needed to develop appropriate data sets and functional assessment models. One particularly difficult aspect is the transferability among geographic regions of specific models used to assess wetland function. Sharing of models could considerably shorten development and implementation of HGM throughout the United States and elsewhere. As hydrology is the driving force behind wetland functions, we assessed the comparability of hydrologic characteristics of three HGM subclasses (slope, headwater floodplain, mainstem floodplain) using comparable long-term hydrologic data sets from different regions of the United States (Ridge and Valley Province in Pennsylvania and the Willamette Valley in Oregon). If hydrology by HGM subclass were similar between different geographic regions, it might be possible to more readily transfer extant models between those regions. We found that slope wetlands (typically groundwater-driven) had similar hydrologic characteristics, even though absolute details (such as depth of water) differed. We did not find the floodplain subclasses to be comparable, likely due to effects of urbanization in Oregon, regional differences in soils and, perhaps, climate. Slight differences in hydrology can shift wetland functions from those mediated by aerobic processes to those dominated by anaerobic processes. Functions such as nutrient cycling can be noticeably altered as a result. Our data suggest considerable caution in the application of models outside of the region for which they were developed.     

Comparative Influence of Forest Management and Habitat Structural Factors on the Abundances of Hollow-Nesting Bird Species in Subtropical Australian Eucalypt Forest

We examined the impact of single-tree selective logging and fuel reduction burns on the abundance of hollow-nesting bird species at a regional scale in southeastern Queensland, Australia. Data were collected on species abundance and habitat structure of dry sclerophyll production forest at 36 sites with known logging and fire histories. Sixteen bird species were recorded with most being resident, territorial, obligate hollow nesters that used hollows that were either small (<10 cm diameter) or very large (>18 cm diameter). Species densities were typically low, but combinations of two forest management and three habitat structural variables influenced the abundances of eight bird species in different and sometimes conflicting ways. The results suggest that habitat tree management for biodiversity in production forests cannot depend upon habitat structural characteristics alone. Management histories appear to have independent influence (on some bird species) that are distinguishable from their impacts on habitat structure per se. Rather than managing to maximize species abundances to maintain biodiversity, we may be better off managing to avoid extinctions of populations by identifying thresholds of acceptable fluctuations in populations of not only hollow-nesting birds but other forest dependent wildlife relative to scientifically valid forest management and habitat structural surrogates.     

Ethoxylated Soybean Polyols for Polyurethanes

Soybean polyols prepared by ring opening reactions of epoxidized soybean oil with hydrogen active compounds (water, alcohols, organic or inorganic acids, thiols, hydrogen etc.) have a low reactivity in the reaction with isocyanates because the hydroxyl groups are secondary. This paper presents a simple and convenient method to increase the reactivity of soybean polyols with secondary hydroxyl groups by ethoxylation reactions with the preservation of triglyceride ester bonds. The method uses mild reaction conditions: low alkoxylation temperature of 35–45 °C, low pressure of 0.1–0.2 MPa (15–30 p.s.i.) and a superacid as catalyst (HBF₄). The new soybean polyols have a higher reactivity toward isocyanates in polyurethane formation due to the high percentage of primary hydroxyl groups. The primary hydroxyl content was determined by the second order kinetics of polyol reaction with phenyl isocyanate.     

Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review

Studies on the use of natural fibers as replacement to man-made fiber in fiber-reinforced composites have increased and opened up further industrial possibilities. Natural fibers have the advantages of low density, low cost, and biodegradability. However, the main disadvantages of natural fibers in composites are the poor compatibility between fiber and matrix and the relative high moisture sorption. Therefore, chemical treatments are considered in modifying the fiber surface properties. In this paper, the different chemical modifications on natural fibers for use in natural fiber-reinforced composites are reviewed. Chemical treatments including alkali, silane, acetylation, benzoylation, acrylation, maleated coupling agents, isocyanates, permanganate and others are discussed. The chemical treatment of fiber aimed at improving the adhesion between the fiber surface and the polymer matrix may not only modify the fiber surface but also increase fiber strength. Water absorption of composites is reduced and their mechanical properties are improved.     

Status of recycling end-of-life vehicles and efforts to reduce automobile shredder residues in Korea

The present end-of-life vehicle (ELV) recycle rate and management status during the dismantling stage were investigated to aid the establishment of policies for the management of ELVs by surveying information and using the results gained from questionnaires given to dismantlers. The average recycle rate at the dismantling stage was 44% of the mass of a new vehicle and the rest of the ELV was then compressed and transported to shredding companies to recover mainly the iron content, which averaged 38.7% of the mass of a new vehicle. Nonferrous metals such as copper, antimony, zinc, and aluminum accounted for only 1.5%. The automobile shredder residues (ASRs) were composed of light and heavy fluffs and soil/dust and amounted to 15.8% based on the mass of a new vehicle. The dumping of fluff and inorganic residues in landfill sites, however, will be restricted when new regulations are implemented to reduce the disposal amount to less than 5% of a new car, as has been done in European countries and in Japan. The detailed characteristics of ASR were investigated to suggest appropriate means of treatment such as volume reduction or the utilization of thermal technologies to meet future expected enforcement. Also, some concerns on hazardous pollutant release such as that of dioxins while utilizing such thermal treatment methods were considered. The present on-going research and development projects to meet such future management targets are also introduced.     

Material flow indicators to measure progress toward a sound material-cycle society

This article reviews recent progress in material flow analysis and its use in providing resource productivity indicators and is based on developments in Japanese policy toward a sound material-cycle society and in international forums such as within the Organisation for Economic Development and Cooperation, covering both institutional and methodological issues. Indicators derived from economy-wide material flow accounts such as direct material inputs are useful to demonstrate the absolute size of a physical economy and to reinforce the need to both reduce consumption of natural resources and limit waste generation. Interpretation of material flows as resources and potential environmental impacts is discussed, and linkages between the size of material flows and specific environmental impacts and damage must be further elaborated for use in environmental policy. Lessons learned from the practical use of resource productivity indicators are also discussed. Additional indicators are needed that can be used to evaluate the performance of microeconomic contributors. The need for an integrated approach that links upstream resource issues and downstream waste issues through the 3Rs concept or the circular economy/society concept is attracting increasing attention. Consequently, the accumulation of reliable scientific knowledge and data in this field in a fully international context is essential.     

Study of Fatigue Life and Filler Interaction of Paper Sludge Filled Epoxidized Natural Rubber (ENR) and Maleated Natural Rubber (MNR) Composites

An investigation on the effect of epoxidation and maleated natural rubber (MNR) on fatigue and rubber-filler interaction properties of paper sludge filled natural rubber composites was elucidated. Paper sludge loading was varied from 0 to 40 phr and conventional vulcanisation system was used while compounding was carried out on a laboratory sized two roll mill. Two different types of natural rubber, SMR L and ENR 50 having 0 and 50 mole% of epoxidation were used in order to investigate the effect of epoxidation on the composites. Results indicate that, at a fixed filler loading, ENR 50 vulcanizates exhibit higher fatigue life than SMR L vulcanizates especially at filler loading below 20 phr which might be associated with better rubber-filler interaction. In the case of composites with the addition of maleated natural rubber (MNR), a higher fatigue life was observed due to presence of physical and/or chemical linkages, which increases the interfacial adhesion. Scanning electron microscopy (SEM) micrographs of fatigue fracture surfaces and rubber-filler interaction study supported the observed result on fatigue life.