Regional and seasonal characteristics of emission sources of fine airborne particulate matter collected in the center and suburbs of Tokyo, Japan as determined by multielement analysis and source receptor models

Airborne particulate matter, suspected to induce adverse effects on human health, have been one of the most important concerns regarding recent air pollution issues in Japan. To characterize regional and seasonal variations in emission sources of fine airborne particulate matter (d < 2 microm), monthly samples (n = 36 for each site) were collected at urban (Tokyo), suburban (Maebashi), and mountainous (Akagi) sites in Japan from April 2003 to March 2006. Multielement analysis of chemical species (Na, Al, K, Ca, V, Cr, Mn, Fe, Ni, Cu, Zn, As, Sb, and Pb) was performed by inductively coupled plasma-atomic emission spectrometry and inductively coupled plasma-mass spectrometry. The combined source receptor model, which consists of positive matrix factorization and chemical mass balance, determined the contributions of nine emission sources (local and continental soils, road dust, coal and oil combustion, waste incineration, steel industry, brake wear, and diesel exhaust) to the observed elemental concentrations. Large regional differences were identified in the source contributions among the observational sites. Diesel exhaust was identified as the most significant source (70% of identified contributions) at the urban site. Local and continental soils, coal combustion, and diesel exhaust were intricately assigned (20-30% each) to the suburban site. Continental soil was the predominant source (65%) at the mountainous site. Respective significant source contributions dominated the seasonal variations of total elemental concentrations at each site. These results suggest that a better understanding of the regional and seasonal characteristics of impacting emission sources will be important for improving regional environments.     

Water quality in the Tibetan Plateau: metal contents of four selected rivers

The water used by 85% of the Asian population originates in Tibetan Plateau. During April and May of 2006, water samples were collected from four major Asian rivers in the Plateau (i.e. the Salween, Mekong, Yangtze River and Yarlung Tsangpo) and analyzed for Cu, Pb, Zn, Ag, Mo, Cd, Co, Cr, Ni, Li, Mn, Al, Fe, Mg and Hg. The results showed that elements such as Mg were rather high in Tibetan rivers, giving a mean electrical conductance of 36 mS/m. In a few locations, the results also showed relatively high concentrations of Al and Fe (>1 mg/L). However, the concentrations of Cu, Zn, Ag, Cd, and Cr were generally low. Contamination with Pb was identified at a few locations in the Salween and Ni at a few sites in the Yangtze River.     

Ultraviolet light-emitting diodes in water disinfection

Background, aim, and scope  The novel system of ultraviolet light-emitting diodes (UV LEDs) was studied in water disinfection. Conventional UV lamps, like mercury vapor lamp, consume much energy and are considered to be problem waste after use. UV LEDs are energy efficient and free of toxicants. This study showed the suitability of LEDs in disinfection and provided information of the effect of two emitted wavelengths and different test mediums to Escherichia coli destruction. Materials and methods  Common laboratory strain of E. coli (K12) was used and the effects of two emitted wavelengths (269 and 276 nm) were investigated with two photolytic batch reactors both including ten LEDs. The effects of test medium were examined with ultrapure water, nutrient and water, and nutrient and water with humic acids. Results  Efficiency of reactors was almost the same even though the one emitting higher wavelength had doubled optical power compared to the other. Therefore, the effect of wavelength was evident and the radiation emitted at 269 nm was more powerful. Also, the impact of background was studied and noticed to have only slight deteriorating effect. In the 5-min experiment, the bacterial reduction of three to four log colony-forming units (CFU) per cubic centimeter was achieved, in all cases. Discussion  When turbidity of the test medium was greater, part of the UV radiation was spent on the absorption and reactions with extra substances on liquid. Humic acids can also coat the bacteria reducing the sensitivity of the cells to UV light. The lower wavelength was distinctly more efficient when the optical power is considered, even though the difference of wavelengths was small. The reason presumably is the greater absorption of DNA causing more efficient bacterial breakage. Conclusions  UV LEDs were efficient in E. coli destruction, even if LEDs were considered to have rather low optical power. The effect of wavelengths was noticeable but the test medium did not have much impact. Recommendations and perspectives  This study found UV LEDs to be an optimal method for bacterial disinfection. The emitted wavelength was found to be an essential factor when using LEDs; thus, care should be taken in selecting the proper LED for maximum disinfection.     

Arsenic and Mn levels in Isaza (Gymnogobius isaza) during the mass mortality event in Lake Biwa, Japan

The present study measured the concentrations of 25 elements (Li, Mg, V, Cr, Mn, Co, Ni, Cu, Zn, As, Se, Rb, Sr, Mo, Ag, Cd, In, Sn, Sb, Cs, Ba, Hg, Tl, Pb and Bi) in the whole body of Isaza which is an endemic fish species to Lake Biwa, Japan, and compared the values in the specimens from the mass mortality Isaza (MMI) and normal fresh Isaza (NFI). The mean levels of Mn and total As (T-As) were relatively higher in MMI than in NFI. In the T-As, highly toxic inorganic As was detected in MMI. Moreover we found Mn and As concentrations in surface sediment were extremely high and temporally increased. From all these results, we could infer that the dissolution of Mn and As from surface sediment of Lake Biwa might have been one of the cause for the mass mortality of Isaza.     

Removal of dichloromethane from ground and wastewater: A review

Dichloromethane (DCM) is a toxic volatile compound which is found in the ground waters and wastewaters of the pharmaceutical, chemical, textile, metal-working and petroleum industries. DCM inhibits the growth of aquatic organisms, induces cancer in animals and is potentially carcinogenic for humans. This article aims to review existing water treatments for DCM removal, focusing on recent technological advances. Air stripping, adsorption and pervaporation were found to be effective in separating DCM from water with a process efficiency of about 99%, 90% and 80% respectively. Electrocatalysis over Cu-impregnated carbon fiber electrode, photo irradiation over TiO₂ and photo-Fenton process led to the complete decomposition of DCM. Aerobic and anaerobic water treatment achieved 99% and 95% removal of DCM respectively. The maximum efficiencies observed for acoustic cavitation, radiolysis and catalytic degradation of CH₂Cl₂ were 90%, 92% and 99% respectively. Ozonation and persulfate oxidation showed lower DCM degradation efficiencies, not exceeding 20%. Further combination of different water treatment methods will further increase DCM degradation efficiency.     

Degradation of chelating agents in aqueous solution using advanced oxidation process (AOP)

This article presents an overview with critical analysis of technical applicability of advanced oxidation process (AOP) in removing chelating agents from aqueous solution. Apart from the effect of metals for chelating agents as a major influencing factor, selected information such as pH, oxidant’s dose, concentrations of pollutants and treatment performance is presented. The performance of individual AOP is compared. It is evident from our literature survey that photocatalysis with UV irradiation alone or coupled with TiO₂, ozonation and Fenton’s oxidation are frequently applied to mineralize target pollutants. Overall, the selection of the most suitable AOP depends on the characteristics of effluents, technical applicability, discharge standard, regulatory requirements and environmental impacts.     

Microbial activities in soils of a former sawmill area

To find out microbial metabolic functioning and toxicity in a former sawmill area, carbon dioxide evolution, methane oxidation potential, 10 hydrolytic enzyme activities, Vibrio fischeri test, fluorescein diacetate hydrolysis activity (FDA), soil pH, carbon, nitrogen and pentachlorophenol (PCP) content were measured at four sites. The area is contaminated with aged chlorophenols. Chlorophenol content of soil was analyzed with a novel HPLC-MS technique, which allowed to measure chlorophenols without derivatization. The sites had a pollution gradient from 0.5 to 15 microg PCP g dw of soil(-1). Endogenous carbon dioxide evolution, methane oxidation potential, butyrate-esterase, acetate-esterase, sulphatase and aminopeptidase activities were lower at the site 2 than 3, although the site 2 and 3 had similar content of carbon and nitrogen. The soil was toxic in V. fischeri test at the site 2, which had high content of PCP (3.93+/-1.00 microg PCP g dw of soil(-1)). The results indicated that endogenous carbon dioxide evolution, methane oxidation potential, butyrate-esterase, acetate-esterase, sulphatase and aminopeptidase activities were sensitive to PCP in the soil. The results indicated that alpha-glucosidase, beta-glucosidase, beta-xylosidase, beta-cellobiosidase, phosphomonoesterase, N-acetyl-glucosaminidase activity and FDA hydrolysis activity were not sensitive to PCP in the soil. Soil processes involved in the cycling of carbon, nitrogen, sulphur and phosphorus were only slightly vulnerable in the former sawmill area and most sensitive microbial species were probably replaced with more tolerant ones to maintain and recover functioning of the former sawmill soils.     

Oil adsorbent produced by the carbonization of rice husks

In this study, rice husks considered to be agricultural waste are converted into an adsorbent intended for use in the disposal of oil spills. The raw and refined (defiberized) husks of Japanese Akita Komachi rice were pyrolyzed in a vacuum (500 Pa) at 300-800 degrees C. The amount of A-heavy and B-heavy oils adsorbed on the carbonized rice husk were then evaluated. Oil adsorption is dependent on the type of oil. Rice husks refined and then pyrolyzed at 600-700 degrees C (1.0 g) adsorbed >6.0 g of B-heavy oil and <1.5 g of water, which indicates their usefulness as an adsorbent for oil spill cleanup in Japan. The refining process contributes to an improvement in the oil adsorption capacity, while the carbonization time (at 600 degrees C) has only a minor influence. The residual fluid components in the carbonized rice husks, rather than their porosity, are closely related to oil adsorption capacity.