Remediation of cadmium contamination in paddy soils by washing with chemicals: selection of washing chemicals

The efficiencies of neutral salts, strong acids, and chelates were tested for extracting cadmium (Cd) from three paddy soils. The higher the selectivity of the cations of the added neutral salts toward soil adsorption sites, the lower the pH in the extracts and the more soil Cd could be extracted. In addition, soil carbon and nitrogen contents and mineral composition were closely associated with the amount of Cd extracted. Calcium chloride and iron(III) chloride were selected as wash chemicals to restore Cd-contaminated paddy soils in situ. Washing with calcium chloride led to the formation of Cd chloride complexes, enhancing Cd extraction from the soils. The washing also substantially decreased soil levels of exchangeable and acid-soluble Cd, which are the major forms of bioavailable Cd for rice (Oryza sativa L.). The optimum conditions for in situ soil washing were also determined for calcium chloride.     

Techniques to separate metal from waste printed circuit boards from discarded personal computers

Waste printed circuit boards contain valuable metals such as Au, Pd, Ag, and Cu that can be reutilized and harmful elements such as Pb, Br, and Cr that must be removed from the viewpoint of environmental conservation. In this research, we examined a method that separates the materials from printed circuit boards contained in discarded personal computers. After cutting the printed circuit boards to a size of 20 × 20 mm, they were heated at 873 K under an Ar atmosphere to remove organic resins containing elements such as C, H, and N. After heat treatment, the printed circuit boards were crushed using a planetary ball mill and the pulverized powders were filtered. The fraction with a granularity of greater than 250 μm was separated into magnetic and nonmagnetic materials by a magnetic field. Because the fraction with a granularity of less than 250 μm contained 39 mass% of C, it was heated at 1273 K in an atmosphere of 95% Ar and 5% O₂ to allow carbon combustion to take place, followed by metal reduction processing at the same temperature in an atmosphere of 97% Ar and 3% H₂. The basicity of the resulting powder was adjusted and the powder was heated at 1773 K under an Ar atmosphere. The proposed method separated the slag and metal, and 80% of the valuable metals contained in printed circuit boards could be collected.     

Improved application of recombinant yeast assays on environmental samples by size exclusion chromatography

The utility of HPLC with a size exclusion chromatography (SEC) column for the fractionation of environmental samples was examined to expand the applicability of recombinant yeast assays (RYAs) for the measurement of estrogenic activity in environmental samples. The elution of steroidal hormone standards through SEC was tested, and river water and sediment samples were subjected to SEC fractionation. The retention times of all estrogen standards were longer than those of the major components with absorbance at 230 nm of the environmental sample matrix. The estrogenic activity of SEC fractions of environmental samples from highly polluted sites was measured using RYA and revealed the existence of estrogenic compounds that could not be detected or quantified in extracted samples before fractionation. The fractions from environmental samples that corresponded to the retention time of estrone, 17[small beta]-estradiol, and estriol were analyzed with LC/MS/MS. These three estrogens were separated into three different fractions, and the concentration of estrone coincided with the estrogenic activity of the fraction in which it was detected. The profile of estrogenic activity of SEC fractions indicated the molecular size of the estrogenic compounds and the yeast growth inhibitors in samples.     

A GIS-based zoning of illegal dumping potential for efficient surveillance

To assist in the efficient surveillance against illegal dumping, this study examined and evaluated two methods to illustrate the illegal dumping potential of sites using GIS (Geographic Information System) data. One approach focused on the occurrence of illegal dumping sites; the other on the size of the illegal dumping. Both approaches to zoning were implemented for the Kanto region of Japan, utilizing seven or eight major geographical attributes most closely related to illegal dumping. The zoning results revealed the areas requiring patrols against illegal dumping. Evaluation of the zoning results using the ROC (Receiver Operating Characteristic) curve showed the number of illegal dumping sites detectable under certain surveillance conditions and that the size-based zoning was superior, but this superiority was insignificant for revealing sites with higher potential for large illegal dumping, for which it would be sufficient to use the occurrence-based zoning. The evaluation also showed the contribution of each geographical attribute. Finally, application of the ROC curve to the surveillance planning process was examined, which enables the total social cost of pollution by illegal dumping, rehabilitation of dumping sites, and illegal dumping surveillance to be minimized.     

Electrical and electronic waste management in China: progress and the barriers to overcome.

Serious adverse impacts on the environment and human health from e-waste recycling have occurred in the past and continue to occur in China today, due to a lack of national management strategies. China has made great efforts to face the challenges of the approaching peak increase in the domestic generation of e-waste and the illegal shipment of e-waste from other countries. This study examined recent progress and analysed the main problems associated with this issue in China. It was found that the material and the financial flows of e-waste in China had their own specific characteristics. Nearly 60% of the generated e-wastes were sold to private individual collectors and passed into informal recycling processes. More than 90% of Chinese citizens are reluctant to pay for the recycling of their e-waste. This is due to their traditional understanding that there remained value in these end-of-life products. Regulations concerning e-waste in China have been drafted but their deficiencies are obvious. The extended producer responsibilities (EPR) have been introduced but are not well defined. Eight formal facilities have been planned and are under construction or are in operation along the eastern coast of China but it will be difficult for them to compete with the informal processes for the reasons identified during the study.     

Influence of the Hydrothermal Pre-treatments on the Adsorption Characteristics of Activated Carbons from Woods

The hydrothermal treatments were conducted prior to the carbonization of oak woods and the obtained charcoals were activated using carbon dioxide or water vapor. The hydrothermal treatments brought about the elutions of acid-soluble lignin fractions as well as hemicellulose fractions accompanied with the decomposition of lignin carbohydrate complexes in the cell walls, which lowered not only the carbon yield of charcoal but also the crystal parameters for the carbon crystallites. However, the activated carbons (AC) produced via the hydrothermal pre-treatment showed superior adsorption properties especially for the adsorptions of 2-methylisoborneol and geosmin as compared with the untreated commercial AC. The hydrothermal treatments prior to the carbonization have some potential to increase the fractions of meso-pores effective for the adsorption of globular shaped molecules.     

Evaluation of environmentally friendly lubricant for aluminum cold forging using friction test based on spline extrusion

It is required to replace the aluminum fluoride coating, which is a popular lubricant for aluminum alloy cold forging in Japan, with environmentally friendly lubricants, because the aluminum fluoride coating has high environmental risks and needs much expense. Evaluations of lubrication performance are necessary before lubricant replacement. The authors proposed new friction test based on combined forward spline-backward can extrusion. It can realize large surface expansion, which is a characteristic of aluminum cold forging. In the present paper, a double-layer-type environmentally friendly solid lubricant film and the aluminum fluoride coating were applied to a precipitation hardened aluminum alloy. The lubrication performance was evaluated by the friction test. The double-layer-type lubricant showed superior performance enough for the replacement. The effect of surface treatment applied to workpiece on the lubrication performance was also investigated. The surface asperity generated by a wet-blasting showed high pickup resistance and low friction.     

A simple method to harness DC (direct current) electrical energy generated by bacterial activity

We developed a new system for collecting electrons generated by bacterial activity to supply DC (direct current) electrical energy. This system used eight titanium sub-electrodes (surface area of each sub-electrode: 189 cm²) connected to one central main titanium electrode (surface area of electrode: 1571 cm²). The distance between each sub-electrode and the main electrode was 30 cm. In an initial experiment, we collected electrons during composting cattle excreta, which was mixed with a commercially available microbial compost activator/starter. We analysed the relationships between the composting temperature and electrical current and voltage. Electrons were effectively collected and used successfully to obtain DC electrical energy. Generation of a stable voltage of approximately 0.5 V was clearly observed. This voltage was not related to compost temperature; however, the generated electrical current increased and decreased with compost temperature. The method was then used in a second experiment to collect electrons generated by bacterial activity in an agricultural field (area: 48 m²). Electrons in the field were effectively collected, and we measured a stable voltage of approximately 1.1 V and a stable current of approximately 0.7 mA. The system has the advantages of being simple, easily maintained, inexpensive, and applicable to large-scale agricultural fields.     

Accelerated biodegradation of nitrophenols in the rhizosphere of Spirodela polyrrhiza

We investigated the biodegradation of 2-nitrophenol (2-NP), 4-nitrophenol (4-NP), and 2,4-dinitrophenol (2,4-DNP) in the rhizosphere of Spirodela polyrrhiza plants by conducting degradation experiments with three river water samples supplemented with each nitrophenol (NP). We then isolated NP-degrading bacteria both from the S. polyrrhiza roots and from the river water. In the river water samples, removal of the three NP was accelerated in the presence of S. polyrrhiza plants. The three NPs persisted in an autoclaved solution with sterile plants suggests that NP removal was accelerated largely by bacterial NP biodegradation rather than by adsorption and uptake by the plants. We isolated 8 strains of NP-degrading bacteria: 6 strains from the S. polyrrhiza roots and 2 strains from river water without the plants. The 2-NP- and 2,4-DNP-degrading bacteria were isolated only from the S. polyrrhiza roots. The 4-NPdegrading bacteria different from those isolated from the river water samples were also found on S. polyrrhiza roots. The 2-NP- and 4-NP-degrading strains isolated from the roots utilized the corresponding NP (0.5 mmol/L) as the sole carbon and energy source. The 2,4-DNP-degrading strains isolated from the roots showed substantial 2,4-DNP-degrading activity, but the presence of other carbon and energy sources was required for their growth. The isolated NP-degrading bacteria from the roots must have contributed to the accelerated degradation of the three NPs in the rhizosphere of S. polyrrhiza. Our results suggested that rhizoremediation with S. polyrrhiza may be effective for NP-contaminated surface water.     

Calorimetric behaviors of hydroxylamine and its salts caused by Fe(III)

The objective of this study is to obtain information on the calorimetric behaviors of aqueous solutions of hydroxylamine (HA), hydroxylamine chloride (HACl), and hydroxylamine nitrate(HAN) caused by different Fe(III) states (free Fe(III) from Fe(NH₄)(SO₄)₂, Fe(CN)₆³⁻, and Fe(EDTA)⁻). The calorimetric data were obtained with a small-scaled reaction calorimeter, Super-CRC.

In the mixing with Fe(III), HA showed the highest reactivity among three substrates. Free Fe(III) and Fe(EDTA)⁻ showed catalytic effects in the reactions. In the overall heat of reactions, Fe(EDTA)⁻ exceeded free Fe(III), which precipitated as Fe(OH)₃ and decreased the chances of interactions with HA. It was suggested that the generation of NH₃ had taken place in the process of reducing HA along with Fe(II) oxidation. Fe(CN)₆³⁻ was less reactive than free Fe(III) and Fe(EDTA)⁻.

The ability of masking Fe(III) was estimated for CyDTA. The HA including CyDTA had no exothermic peak; however, there was an endothermic peak of the heat flow at Fe(III) injection. CyDTA was found to have the ability to inhibit a violent exothermic reaction of HA.