Effects of light quality on initiation and development of meroplanktonic diatom blooms in a eutrophic shallow sea

We investigated the effects of light quality on resting stage cell germination and vegetative cell growth of meroplanktonic diatoms in a small port in Hakata Bay, Japan and in the laboratory. During the investigation over the year of 2006, the meroplanktonic diatom bloom first occurred in the end of May and then repeated wane and wax until October in the small port. From late April to middle May, light penetrating the water column was often strong and attenuations of all spectral lights were low. During this period, Skeletonema costatum, Thalassiosira minima, and Chaetoceros sp. appeared frequently, followed by the blooms of S. costatum and Chaetoceros sp. in late May. Thereafter, S. costatum and Chaetoceros sp. bloomed in late June but not in middle June, when pigmented flagellates bloom appeared. The attenuation of short-wavelength light such as violet and blue lights was markedly high during these diatom and flagellate blooms; all blooms disappeared within several days. Vegetative cell strains of the three diatoms under light emitting diodes (LEDs) with six different spectra (violet, blue, green, orange, red, and near-infrared) grew at a higher rate under short-wavelength light, violet and blue. On the other hand, when suspensions of bottom sediments from Hakata Bay were cultured under the same LEDs and in the dark, vegetative cells of S. costatum appeared under all LEDs except for orange and near-infrared, vegetative cells of T. minima appeared under all LEDs but not in the dark, and vegetative cells of Chaetoceros sp. appeared under violet and blue LEDs. However, vegetative cell densities of the three diatoms increased much more under violet light than under other LEDs within a short period (6 days). Our study indicates that underwater penetration by short-wavelength light, such as violet and blue, may be an important factor in the initiation and development of meroplanktonic diatom blooms.     

Quantification of free and esterified long-chain fatty acids without extraction by high-performance liquid chromatography in anaerobic digestion sludge

Journal of Material Cycles and Waste Management - During anaerobic digestion, the concentrations of long-chain fatty acids (LCFAs) need to be monitored to achieve good performance due to their...     

Greenhouse gas reduction potential by household waste prevention

Journal of Material Cycles and Waste Management - We used a life-cycle assessment (LCA) approach to estimate the greenhouse gas (GHG) reduction effects of preventing 50% of all avoidable household...     

Situational characteristics of fatal pedestrian accidents involving vehicles traveling at low speeds in Japan

Abstract

Objective: This study aimed to investigate the situational characteristics of fatal pedestrian accidents involving vehicles traveling at low speeds in Japan. We focused on vehicles with 4 or more wheels. Such characteristics included daytime or nighttime conditions, road type, vehicle behaviors preceding the accident, and vehicle impact locations.

Methods: Pedestrian fatality data on vehicle–pedestrian accidents were obtained from the Institute for Traffic Accident Research and Data Analysis of Japan (ITARDA) from 2005 to 2014. Nine vehicle classifications were considered: Trucks with gross vehicle weight (GVW) ≥7.5 tons and <7.5 tons, buses, box vans, minivans, sport utility vehicles (SUVs), sedans, light passenger cars (LPCs), and light cargo vans (LCVs). We compared the situational daytime or nighttime conditions, road type, vehicle behaviors preceding the accident, and vehicle impact locations for accident-involved vehicles traveling at low and higher speeds across all vehicle types.

Results: The results indicate that pedestrian fatalities involving vehicles traveling at low speeds occurred more often under daytime conditions across all vehicle types. At signalized intersections, the relative proportions of pedestrian fatalities were significantly higher when vehicles were traveling at low speed, except when the accidents involved box vans or SUVs. Similarly, when vehicles turned right, the relative proportions of pedestrian fatalities were significantly higher when vehicles traveling at low speed were involved across all vehicle types. In terms of the frontal right vehicle impact location, the relative proportions of pedestrian fatalities were significantly higher when trucks with GVW ≥7.5 tons or <7.5 tons, sedans, or LCVs traveling at low speed were involved.

Conclusions: The situational characteristics of fatal pedestrian accidents involving vehicles traveling at low speeds identified in this study can guide targeted development of new traffic safety regulations or technologies specific to vehicle–pedestrian interactions at low vehicle travel speeds (i.e., driver alert devices or automated emergency braking systems). Ultimately, these developments can improve pedestrian safety by reducing the frequency or severity of vehicle–pedestrian accidents for vehicles turning right at intersections and/or reducing the number of resultant pedestrian fatalities.     

In-use polybrominated diphenyl ether (PBDE) stocks and atmospheric emissions in Japan

We estimated the in-use stocks of polybrominated diphenyl ethers (PBDEs) in Japan using a population balance model. The estimation is based on the domestic demand of PBDEs and the assumed survival rate of these products. Two cases relevant to the future regulation of commercial deca-BDE are considered, namely (1) deca-BDE declines at the same rate as the current rate of decline, and (2) deca-BDE is discontinued after 2020. The estimates of the decreasing rates of in-use penta-, octa-, and deca-BDE stocks were proportional with the measured decreases in the atmospheric concentrations of these substances. The in-use penta- and octa-BDE stocks could be depleted in the near future (500 and 60 tonne in 2013, and an estimated 20 and <1 tonne in 2020, respectively). Relevant to case 1, the in-use stocks of deca-BDE-containing products would be 28,000 tonne in 2013 and an estimated 1900 tonne in 2040, providing an ongoing source of deca-BDE emission to the environment. On the other hand, relevant to case 2, most of the deca-BDE would be phased out by 2040. The atmospheric emissions of deca-BDE were predicted at 84–841 kg/year in 2013 and an estimated 43–425 kg/year in 2020.     

Trade and the emissions trading system in a small open economy

Environmental Economics and Policy Studies - To control greenhouse gas emissions efficiently, we should regulate all pollution emission sources in the economy equally. However, in the real world,...     

Waste prevention for sustainable resource and waste management

Although the 2Rs (reduce and reuse) are considered high-priority approaches, there has not been enough quantitative research on effective 2R management. The purpose of this paper is to provide information obtained through the International Workshop in Kyoto, Japan, on 11–13 November 2015, which included invited experts and researchers in several countries who were in charge of 3R policies, and an additional review of 245 previous studies. It was found that, regarding policy development, the decoupling between environmental pressures and economy growth was recognized as an essential step towards a sustainable society. 3R and resource management policies, including waste prevention, will play a crucial role. Approaches using material/substance flow analyses have become sophisticated enough to describe the fate of resources and/or hazardous substances based on human activity and the environment, including the final sink. Life-cycle assessment has also been developed to evaluate waste prevention activities. Regarding target products for waste prevention, food loss is one of the waste fractions with the highest priority because its countermeasures have significant upstream and downstream effects. Persistent organic pollutants and hazardous compounds should also be taken into account in the situation where recycling activities are globally widespread for the promotion of a material-cycling society.     

Economic evaluation of optional recycling processes for waste electronic home appliances

This paper presents an economic evaluation of three typical recycling processes for the five main types of waste electronic home appliances (EHA) (TV set, refrigerator, washing machine, air conditioner and personal computer) in Beijing, the capital of China. The main purpose is to identify the formal management framework with economic feasibility for the waste EHA generated in large municipalities of China. It is found that the advanced technologies, which have mechanical processing units, should be introduced to recover more valuable materials from the waste appliances. Net revenues with a range of 90–240 RMB (Chinese currency unit, 1.0 USD ≈ 8.0 RMB) per unit, depend on the type of appliance, could be expected in case of using the most complicated procedures which can separate both metals and plastics from the shredded mixtures. However, the recycling of waste refrigerator and waste washing machine will, respectively, spend about 100 and 6 RMB per unit if solely by simple manual dismantling. Revenues from recycling of the other three types of appliances are positive but quite low in this case. Although positive revenues could be achieved from the isolated evaluation of recycling, the entire management system, which also covers the phases of collection and transportation, is economically infeasible if the waste appliances are bought from the households still at current prices. Based on a survey of the householder's attitude to the cost for waste EHA management, which was conducted earlier, the practical way to construct a formal management system for waste EHA in Beijing is to reduce the citizen's traditional expectation to the values of waste appliances and encourage their transfer to the formal collection system at lower prices.     

Restoration of cadmium-contaminated paddy soils by washing with ferric chloride: Cd extraction mechanism and bench-scale verification

The ability of FeCl3 to extract Cd from three paddy soils was compared with that of various irons, manganese, and zinc salts to elucidate the extraction mechanism. Manganese, zinc and iron salts (including FeCl3) extracted 4-41%, 8-44% and 24-66% of total Cd, respectively. This difference reflected the pH of the extraction solution, indicating that the primary mechanism of Cd extraction by FeCl3 is proton release coupled with hydroxide generation, as iron hydroxides are insoluble. Washing with FeCl3 led to the formation of Cd-chloride complexes, enhancing Cd extraction from the soils. FeCl3 effectively extracted Cd from all of the three soils compared to HCl that is a conventional washing chemical, when the concentrations of the two washing chemicals were between 15 and 60mM(c) (at above extraction pH 2.4), while the corresponding extraction pH of FeCl3 was slightly higher than HCl. As HCl is the strong acid of complete dissociation, if excess amount of HCl was added to soil, it is possible to give the dissolution of clay minerals in soils. In contrast, proton release from FeCl3 is controlled by the chemical equilibrium of hydroxide formation. While soil fertility properties were affected by a bench-scale soil washing with 45mM(c) FeCl3, adverse effects were not crucial and could be corrected. The bench-scale test confirmed the effectiveness of FeCl3 for removal of soil Cd. The washing had no negative effect on rice yield and lowered the Cd concentration of rice grain and rice straw in a pot experiment.