Mixing dynamics of turbidity currents interacting with complex seafloor topography

Direct Numerical Simulations are employed to investigate the mixing dynamics of turbidity currents interacting with seamounts of various heights. The mixing properties are found to be governed by the competing effects of turbulence amplification and enhanced dissipation due to the three-dimensional topography. In addition, particle settling is seen to play an important role as well, as it affects the local density stratification, and hence the stability, of the current. The interplay of these different mechanisms results in the non-monotonic dependence of the mixing behavior on the height of the seamount. Regions of dilute lock fluid concentration generally mix more intensely as a result of the seafloor topography, while concentrated lock fluid remains relatively unaffected. For long times, the strongest mixing occurs for intermediate bump heights. Particle settling is seen to cause turbidity currents to mix more intensely with the ambient than gravity currents.     

A review of the water resources management for the Brantas River basin: challenges in the transition to an integrated water resources management

Environment, Development and Sustainability - This paper reviews an integrated approach involving the representative stakeholders in the development and management of water available in the Brantas...     

Epidemiological and biomechanical evaluation of airline baggage handling

Objectives. Musculoskeletal disorders (MSDs) are prevalent among airline baggage handlers due to manual materials handling. In this study, the Nordic musculoskeletal questionnaire (NMQ), the revised National Institute for Occupational Safety and Health (NIOSH) lifting equation, and the University of Michigan 3D Static Strength Prediction Program? (3DSSPP) were used to analyze MSDs among baggage handlers. Methods. The NMQ was filled out by 209 baggage handlers and 46 arbitrarily selected baggage handlers were evaluated using the NIOSH method and 3DSSPP. Results. The obtained results showed that the most common MSDs occurred in the lower back region. The next risky regions included knees, neck, and upper back, respectively. The NIOSH results confirmed that the subjects lifted loads heavier than the permitted limit and their lifting postures were inappropriate. The results of the 3DSSPP also indicated that compression forces exceeded the NIOSH limit in these awkward postures. Conclusions. Relying on this study, holding compulsory ergonomic lifting training courses could be proposed for workers and regulations adjusting an upper limit for maximum baggage weight must be also enacted in order to improve occupational health and prevent the prevalence of increasing MSDs.     

Development of the Indonesian and Malaysian Fire Danger Rating Systems

Forest and land fires in Southeast Asia have many social, economic, and environmental impacts. Tropical peatland fires affect global carbon dynamics, and haze from peat fires has serious negative impacts on the regional economy and human health. To mitigate these fire-related problems, forest and land management agencies require an early warning system to assist them in implementing fire prevention and management plans before fire problems begin. Fire Danger Rating Systems (FDRS) were developed for Indonesia and Malaysia to provide early warning of the potential for serious fire and haze events. In particular, they identify time periods when fires can readily start and spread to become uncontrolled fires and time periods when smoke from smouldering fires will cause an unacceptably high level of haze. The FDRS were developed by adapting components of the Canadian Forest Fire Danger Rating System, including the Canadian Forest Fire Weather Index (FWI) System and the Canadian Forest Fire Behavior Prediction (FBP) System, to local vegetation, climate, and fire regime conditions. A smoke potential indicator was developed using the Drought Code (DC) of the FWI System. Historical air quality analysis showed that the occurrence of severe haze events increased substantially when DC was above 400. An ignition potential indicator was developed using the Fine Fuel Moisture Code (FFMC) of the FWI System. Historical hot spot analysis, grass moisture, and grass ignition studies showed that fire occurrence and the ability for grass fires to start and spread dramatically increased when FFMC > 82. The Initial Spread Index (ISI) of the FWI System was used to develop a difficulty of control indicator for grassland fires, a fuel type that can exhibit high rates of spread and fire intensity. This ISI-based indicator was developed using the grass fuel model of the FBP System, along with a standard grass fuel load and curing level estimated from previous Indonesian studies. Very high fire intensity is expected in grasslands when ISI ≥ 6. To provide early warning, the FDRS identifies classes of increasing fire danger as the FFMC, DC, and ISI approach these key threshold values. The Indonesian FDRS is now operated nationally at the Indonesian Meteorological and Geophysical Agency. The Malaysian Meteorological Service operates the Malaysian FDRS and displays regional outputs for the Association of Southeast Asian Nations. The FDRS are being used by forestry, agriculture, environment, and fire and rescue agencies to develop and implement fire prevention, detection, and suppression plans.     

Faecal sterols as sewage markers in the Langat River, Malaysia: Integration of biomarker and multivariate statistical approaches

The Langat River in Malaysia has been experiencing anthropogenic input from urban, rural and industrial activities for many years. Sewage contamination, possibly originating from the greater than three million inhabitants of the Langat River Basin, were examined. Sediment samples from 22 stations (SL01-SL22) along the Langat River were collected, extracted and analysed by GC-MS. Six different sterols were identified and quantified. The highest sterol concentration was found at station SL02 (618.29 ng/g dry weight), which situated in the Balak River whereas the other sediment samples ranged between 11.60 and 446.52 ng/g dry weight. Sterol ratios were used to identify sources, occurrence and partitioning of faecal matter in sediments and majority of the ratios clearly demonstrated that sewage contamination was occurring at most stations in the Langat River. A multivariate statistical analysis was used in conjunction with a combination of biomarkers to better understand the data that clearly separated the compounds. Most sediments of the Langat River were found to contain low to mid-range sewage contamination with some containing `significant' levels of contamination. This is the first report on sewage pollution in the Langat River based on a combination of biomarker and multivariate statistical approaches that will establish a new standard for sewage detection using faecal sterols.     

Spatial analysis of chromium in southwestern part of Iran: probabilistic health risk and multivariate global sensitivity analysis

This study was concerned with chromium as a potential carcinogenic contaminant in 64 wells located in five aquifers, southwest of Iran. A probabilistic health risk assessment indicated a high risk to the local residents including adults and children in the study area. A sequential sensitivity analysis and a novel approach known as multivariate global sensitivity analysis using both principal component analysis and B-spline were applied to investigate the behavior of health risk model along time considering four independent input parameters in the risk equation. In this context, based on the results of sensitivity analysis, concentration of chromium in drinking water (C_w) and body weight (W) were the most influential parameters. Random forest (RF) was used as a variable selection method to choose the most influential parameters for the prediction of chromium. Five parameters, among 13 water quality variables, including phosphate, nitrate, fluoride, manganese and iron were selected by RF as the most important parameters for spatial prediction. Hybrid methods of RF and ordinary kriging (RFOK) and RF and inverse distance weighting (RFIDW) were then applied for spatial prediction of Cr using the secondary variables. The RFOK and RFIDW were more efficient than that of ordinary kriging (OK) with respect to a cross-validation algorithm. For instance, in terms of relative root mean squared error, the performance of OK was improved from 31.72 to 23.21 and 23.61 for RFOK and RFIDW, respectively.

     

Integrating local knowledge with science and technology in management of soil,water and nutrients: implications for management of natural capital for sustainable rural livelihoods

Harnessing local knowledge and practices for sustainable management of soil, water and nutrients is important for sustainable development. This work aims to understand soil productivity in traditional open-ridging practices and integrate scientific ideas and technologies into traditional practices for enhancing management of soil productivity. Participatory assessments, household surveys, field experiments, observations and analyses of outcomes were used. Participatory assessments revealed declining natural soil fertility and maize productivity over time, a concern reiterated by 82.5% of respondents. Evaluation of ridge tillage practices showed that bean yields were significantly (p?<?0.05) higher by 19–35% in traditional open ridges and increased by 23–38% when ties were integrated. Integration of fertilizers resulted in significantly (p?<?0.05) higher subsequent maize yields in tied ridges than in traditional open ridge and flat cultivation practices. Improved integrated tillage practices resulted in increased soil and water conservation, soil fertility and crop tolerance to prolonged no-rainfall spells. National development policies should create enabling environments for smallholder farmers to integrate modern knowledge and technologies with their traditional knowledge and practices in land management for high and sustained quality of natural capital for secure and sustainable livelihoods.     

Influence of seafloor topography on the depositional behavior of bi-disperse turbidity currents: a three-dimensional,depth-resolved numerical investigation

We discuss the results of direct numerical simulations of bi-disperse turbidity currents interacting with a flat bottom wall and a Gaussian bump, respectively, with a focus on the final deposit profiles of the coarse and fine particles. We identify regions of reduced and enhanced deposition, as a result of the presence of the bump. Coarse particles are predominantly deposited towards the sides of the bump, as a result of the bi-section and lateral deflection of the current by the bump. In contrast, for fine particles the influence of the bump is felt more in its far wake. We furthermore employ Lagrangian markers in order to track the coarse and fine particles in the current, and to investigate their deposit locations as function of their location of origin. By comparing the final deposit maps, we observe that the bump has the strongest influence on those particles originating in the central lock sections.     

Sustainable red ceramic block: recycling of a sewage sludge as raw material

Journal of Material Cycles and Waste Management - Sewage sludge (SS) is a residue resulting from wastewater treatment, which is widely increasing due to population growth and economic development....     

Transformation of sulfaquinoxaline by chlorine and UV light in water: kinetics and by-product identification

Sulfaquinoxaline (SQX) is an antimicrobial of the sulfonamide class, frequently detected at low levels in drinking and surface water as organic micropollutant. The main goal of the present study is the evaluation of SQX reactivity during chlorination and UV irradiations which are two processes mainly used in water treatment plants. The SQX transformation by chlorination and UV lights (254 nm) was investigated in purified water at common conditions used for water disinfection (pH =?7.2, temperature =?25 °C, [chlorine] =?3 mg L^?1). The result shows a slow degradation of SQX during photolysis compared with chlorination process. Kinetic studies that fitted a fluence-based first-order kinetic model were used to determine the kinetic constants of SQX degradation; they were equal to 0.7?×?10^?4 and 0.7?×?10^?2 s^?1corresponding to the half time lives of 162 and 1.64 min during photolysis and chlorination, respectively. In the second step, seven by-products were generated during a chlorination and photo-transformation of SQX and identified using liquid chromatography with electrospray ionization and tandem mass spectrometry (MS-MS). SO₂ extrusion and direct decomposition were the common degradation pathway during photolysis and chlorination. Hydroxylation and isomerization were observed during photodegradation only while electrophilic substitution was observed during chlorination process.