MODELING THE BUILDUP AND WASHOFF OF POLLUTANTS ON URBAN WATERSHEDS1

ABSTRACT: A model for urban stormwater quality was developed in this study. The basis for the model is the process by which pollutants build up on the watershed surface. For the wet climate of the study site, it was assumed that there exists an interval of time over which the pollutant buildup equals the pollutant washoff (no accumulation of pollutant). The buildup model was represented by a linear function of the antecedent dry time. The buildup function was then linked with a pollutant washoff model represented by a power function of the storm runoff volume. Various time intervals for no net accumulation were tested to calibrate the model. The model was calibrated to observed data for two small urban basins in Baton Rouge, Louisiana, and model results were used to analyze the behavior of phosphorus concentrations in storm runoff from these basins over a long period of time.     

Thermal and mechanical properties of poly(lactic Acid) and poly(ethylene/butylene Succinate) blends

In this study, blends of poly (lactic acid) (PLA) with poly(ethylene/butylene succinate) (Bionolle) have been investigated for their thermal and mechanical properties as a function of the concentration of Bionolle. Differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and tensile tests were used to characterize the blends. From the results of the DMA and DSC, it was found that this blend system was not miscible within the compositions studied. DSC results showed that adding Bionolle aids in crystallization of PLA. It was observed that increasing the Bionolle concentration led to a slight increase in the strain-at-break of the blends but a decrease in the Young’s modulus and ultimate tensile strength. Biaxially oriented films showed an increase in tensile strength, modulus, and strain-at-break.     

White spruce response to co-composted hydrocarbon-contaminated drilling waste: effects of compost age and nitrogen fertilization

There are growing interests to use co-composted drilling wastes contaminated with hydrocarbons as growth media for planting in land reclamation. However, such use of the compost may have potential problems such as inherent toxicity of residual hydrocarbon and microbial N immobilization due to high compost C to N ratios. We investigated the growth, biomass production, N uptake, and foliar delta13C of white spruce (Picea glauca [Moench] Voss) seedlings in a pot experiment using 1-, 2-, 3-, and 4-yr-old composts (with different hydrocarbon concentrations and C to N ratios) and a local noncontaminated soil with (200 kg N ha(-1)) or without N fertilization. Growth and N content of seedlings (particularly N content in roots) were lower when grown in the compost media as compared with those grown in the soil. Within the compost treatments seedling growth was affected by compost age, but the magnitude of growth reduction was not linearly proportional to hydrocarbon concentrations. Plant N uptake increased with compost age, which corresponds with an increase in indigenous mineral N concentration. Effects of N fertilization on N uptake were curtailed by the presence of indigenous mineral N (e.g., in the 4-yr-old compost) and by fertilization-induced stimulation of microbial activities (e.g., in the 1-yr-old compost). The differences in foliar delta13C values between seedlings grown in compost and soil (P < 0.05) suggest that limitations on water uptake caused by the residual hydrocarbon might have been the predominant factor limiting seedling growth in the compost media. This study suggests that water stress caused by residual hydrocarbons may be a critical factor for the successful use of co-composted drilling wastes as a growth medium.     

Valorisation of used cooking oil sludge by codigestion with swine manure

The addition of lipid wastes to the digestion of swine manure was studied as a means of increasing biogas production. Lipid waste was obtained from a biodiesel plant where used cooking oil is the feedstock. Digestion of this co-substrate was proposed as a way of valorising residual streams from the process of biodiesel production and to integrate the digestion process into the biorefinery concept.Batch digestion tests were performed at different co-digesting proportions obtaining as a result an increase in biogas production with the increase in the amount of co-substrate added to the mixture. Semi-continuous digestion was studied at a 7% (w/w) mass fraction of total solids. Co-digestion was successful at a hydraulic retention time (HRT) of 50 d but a decrease to 30 d resulted in a decrease in specific gas production and accumulation of volatile and long chain fatty acids. The CH₄ yield obtained was 326 ± 46 l/kg VS_feed at an HRT of 50 d, while this value was reduced to 274 ± 43 l/kg VS_feed when evaluated at an HRT of 30 d. However these values were higher than the one obtained under batch conditions (266 ± 40 l/kg VS_feed), thus indicating the need of acclimation to the co-substrate. Despite of operating at low organic loading rate (OLR), measurements from respirometry assays of digestate samples (at an HRT of 50 d) suggested that the effluent could not be directly applied to the soil as fertiliser and might have a negative effect over soil or crops.     

Designing a policy package for the promotion of servicising: A case study of vineyard crop protection in Galicia (Spain)

The servicising approach in vineyard protection is considered a valid alternative to achieve decoupling between the economic and environmental performance of viticulture. In this paper, a policy package is designed to promote the uptake of a servicised model of vineyard protection in an area of smallholding viticulture. In doing so, a specific methodology based on a step by step protocol has been followed that aims to come up with a package that is effective, implementable and socially as well as politically acceptable. The paper concludes on the importance of combining several policy instruments in a policy package to realise the political objective. The proposed viable policy package includes incentives that support the companies’ shift towards offering crop protection solutions, further development of IPM solutions and instruments that encourage farmers to reduce the use of pesticides and collectively hire crop protection services.     

Assessing relative vulnerability to sea-level rise in the western part of the Mekong River Delta in Vietnam

The Mekong River Delta in Vietnam plays a crucial role for the region in terms of food security and socioeconomic development; however, it is one of the most low-lying and densely populated areas in the world. It is vulnerable to seawater incursion, flood risk, and shoreline change, exacerbated as a consequence of sea-level rise (SLR) related to climate change. This study examined the Kien Giang coast in the western part of the delta, comprising seven coastal districts (namely Ha Tien, Kien Luong, Hon Dat, Rach Gia, Chau Thanh, An Bien, and An Minh), the economy of which is important in terms of agriculture and aquaculture. The analytical hierarchical process (AHP) method of multi-criteria decision making was integrated directly into geographic information systems (GIS) to derive a composite vulnerability index that indicated areas most likely to be vulnerable to SLR. The hierarchical structure comprised three key components: exposure (E), sensitivity (S), and adaptive capacity (A), at level 1. At the next level, 8 sub-components were mapped: seawater incursion, flood risk, shoreline change, population characteristics, land use/land cover, and socioeconomic, infrastructure, and technological capability, beyond which a further 22 variables (level 3) and 24 sub-variables (level 4) related to vulnerability were also mapped. Variables were assigned weights for incorporation into AHP pairwise comparisons after discussion with stakeholders. Maps were generated to visualise areas where the relative vulnerability was very low, low, moderate, high, and very high. Societal data were generally only available at district level; however, several regional patterns emerged. Relatively high exposure to flooding and inundation, salinity, and moderate loss of mangroves occurred along the coastal fringe of each district. This western section of the delta, which is low-lying and remote from the distributaries that carry sediment to the coast, appears to be particularly vulnerable. The most sensitive areas tended to be ethnic households engaged in rice cultivation and with moderate population density. The least adaptable areas consisted of high numbers of poor households, with low income, and moderate densities of transport, irrigation and drainage systems. Most coastal districts were determined to be moderately to relatively highly vulnerable, with scattered hotspots along the coast.     

Environmentally Friendly Polyurethane Composites: Preparation, Characterization and Mechanical Properties

The waterborne polyurethane (PU) prepolymer was prepared based on isophorone diisocyanate (IPDI), polyester polyol (N220), dimethylol propionic acid (DMPA) and hydroxyethyl methyl acrylate (HEMA). The modified waterborne polyurethane–acrylate (PUA) emulsions were obtained with different proportions of acrylate (butyl acrylate and methyl methacrylate) and initiating agent by in situ dispersion technique. The structures and thermal properties of prepared PU and PUA were analyzed and characterized with FT-IR, UV–Vis spectroscopy and DSC. The PUA hybrid samples had lower glass transition temperature of hard segment and higher decomposition temperatures than PU sample. Performances of the emulsion and film were studied by means of apparent viscidity, particle size and polydispersity, surface tension and mechanical properties. The results indicated that the particle sizes of the PUA dispersions were larger than those of the pure PU and the solvent resistance, mechanical properties of PUA films was improved compare with the unmodified polyurethane film. The film had the biggest hardness and the least water absorption when the BA/MMA mass ratio 5:5 modified PU. The obtained PUA have great potential application such as coatings, leather finishing, adhesives, sealants, plastic coatings and wood finishes.     

Facile in situ synthesis of silver nanocomposites based on cellulosic paper for photocatalytic applications

Environmental Science and Pollution Research - In this work, various photocatalysts were synthesized with an impregnation-precipitation process to in situ decorate Ag-based nanoparticles (NPs,...