Release of beryllium from mineral ores in artificial lung and skin surface fluids

Exposure to some manufactured beryllium compounds via skin contact or inhalation can cause sensitization. A portion of sensitized persons who inhale beryllium may develop chronic beryllium disease (CBD). Little is understood about exposures to naturally occurring beryllium minerals. The purpose of this study was to assess the bioaccessibility of beryllium from bertrandite ore. Dissolution of bertrandite from two mine pits (Monitor and Blue Chalk) was evaluated for both the dermal and inhalation exposure pathways by determining bioaccessibility in artificial sweat (pH 5.3 and pH 6.5), airway lining fluid (SUF, pH 7.3), and alveolar macrophage phagolysosomal fluid (PSF, pH 4.5). Significantly more beryllium was released from Monitor pit ore than Blue Chalk pit ore in artificial sweat buffered to pH 5.3 (0.88 ± 0.01% vs. 0.36 ± 0.00%) and pH 6.5 (0.09 ± 0.00% vs. 0.03 ± 0.01%). Rates of beryllium released from the ores in artificial sweat were faster than previously measured for manufactured forms of beryllium (e.g., beryllium oxide), known to induce sensitization in mice. In SUF, levels of beryllium were below the analytical limit of detection. In PSF, beryllium dissolution was biphasic (initial rapid diffusion followed by latter slower surface reactions). During the latter phase, dissolution half-times were 1,400 to 2,000 days, and rate constants were ~7 × 10⁻¹⁰ g/(cm²·day), indicating that bertrandite is persistent in the lung. These data indicate that it is prudent to control skin and inhalation exposures to bertrandite dusts.     

Distribution,geochemistry, and mineralogy of aerosols in the Angouran Mine area,northwest Iran

The Angouran Mine, located in northwest Iran, is the largest Zn–Pb producer in the Middle East. This study was designed to investigate the distribution, geochemistry, and mineralogy of the aerosols in the mining area and to assess their likely health impacts on the local residents. For this purpose, 36 aerosol samples were collected from 2014 to 2015 at nine sites located in mine district and upwind and downwind directions. The concentration of potentially toxic elements in the aerosols was determined using AAS instrument. Size, morphology, and mineralogy of the particles were studied using SEM and EDX spectra. The results indicate that the amount of total suspended particles in upwind, mine district, and downwind sites is 95.5, 463.4 and 287.5 µg/m³, respectively. The concentrations of PM_2.5 in the three locations are 8.9, 134.7, and 51.8 µg/m³, whereas the PM₁₀ contents are 2.9, 74.4, and 15.5 µg/m³, respectively. These observations point to the impact of mining activities on the concentration of aerosols in the local atmosphere. The values of air quality index also show the probable effects of the mining activities on the health of the local populations, especially for allergic peoples. The average concentration of Zn in the samples collected from the mining district (290 µg/kg) is much higher than its value in the upwind sites (27 µg/kg). The highest concentration of As (70 µg/kg), Cd (10 µg/kg), and Pb (3 µg/kg) is in downwind sites, which shows the negative impact of mining activities on the local air quality. Temporally, the highest concentration of the studied elements is recorded in spring season, especially for PM_2.5 collected in downwind stations. Based on the results of SEM and EDX spectra, three groups of minerals, i.e., carbonates, silicates, and sulfides, are present in the aerosol particles, confirming the local source for the aerosols. SEM analyses showed that the aerosol particles with dissimilar chemical composition have different morphologies such as irregular, rounded, elongated, and angular. On the basis of the results, the mining activities in the Angouran Zn–Pb Mine may have various short- and long-term consequences on the public health, especially due to high amount of the finer particles (PM_2.5) and the higher concentration of the potentially toxic elements in PM_2.5 which can penetrate into the lungs.

     

Polycyclic aromatic hydrocarbon derivatives in airborne particulate matter: sources,analysis and toxicity

Polycyclic aromatic hydrocarbons (PAHs) are worldwide pollutants produced mainly during incomplete combustion and pyrolysis of organic substances. PAH derivatives are components with hydrogen on the aromatic ring substituted by carbonyl-, nitro- and hydroxyl-functional groups (N-PAH, O-PAH or OH-PAH), or a group of heterocyclic PAHs containing one sulfur atom in place of a carbon atom in the aromatic ring. PAHs and their derivatives can be either introduced in the atmosphere directly in this form as primary pollutants, or formed by homogenous and heterogeneous oxidation reactions. During the last decades, interest on studying PAH derivatives has increased because derivatives may be more harmful than parent compounds. PAH derivatives have been detected in the atmospheric particulate matter in numerous cities worldwide. PAH derivatives enter living organisms by inhalation, oral ingestion and dermal contact. In vivo and in vitro experiments together with epidemiological studies have shown the toxic effects of PAH derivatives, notably for compounds present in airborne and diesel exhaust particles. Here we review the sources, the mechanisms of formation, the physicochemical properties, the analytical methods, and the toxicological effects of PAHs and their derivatives in airborne particulate matter.     

Enhanced catalytic complete oxidation of 1,2-dichloroethane over mesoporous transition metal-doped γ-Al2O3

High-surface-area mesoprous powders of γ-Al₂O₃ doped with Cu²⁺, Cr³⁺, and V³⁺ ions were prepared via a modified sol-gel method and were investigated as catalysts for the oxidation of chlorinated organic compounds. The composites retained high surface areas and pore volumes comparable with those of undoped γ-Al₂O₃ and the presence of the transition metal ions enhanced their surface acidic properties. The catalytic activity of the prepared catalysts in the oxidation of 1,2-dichloroethane (DCE) was studied in the temperature range of 250-400℃. The catalytic activity and product selectivity were strongly dependent on the presence and the type of dopant ion. While Cu²⁺- and Cr³⁺-containing catalysts showed 100% conversion at 300℃ and 350℃, V³⁺-containing catalyst showed considerably lower conversion. Furthermore, while the major products of the reactions over γ-alumina were vinyl chloride (C₂H₃Cl) and hydrogen chloride (HCl) at all temperatures, Cu- and Cr-doped catalysts showed significantly stronger capability for deep oxidation to CO₂.     

An intelligent disaster decision support system for increasing the sustainability of transport networks

The increase in extreme weather events arising from climate change is posing serious threats to the sustainability of transport systems, creating the need for improved tools for decision support for more effectively managing natural disasters. There are numerous transport‐related decisions that are required during the response, recovery and preparedness stages of the disaster management cycle. This paper describes the development and application of the Intelligent Disaster Decision Support System (IDDSS), which provides a platform for integrating a vast range of road network, traffic, geographic, economic and meteorological data, as well as dynamic disaster and transport models. Initial applications to the response and planning for floods and fires are presented to illustrate some of its capabilities. The IDDSS can be used to improve disaster management, which in turn will increase the sustainability of transport networks.     

Citizens’ perceptions of trust relationships in the environmental management process in North Lebanon

This research investigates how trust plays a role in environmental management in North Lebanon, which has suffered repeated episodes of armed conflict in recent times. Previous studies have shown that environmental problems have increased and that the government has been unable to address these, even during periods of relative peace. We examined trust as a factor that contributes to, or hampers, environmental management. Our analysis drew on a survey in 2011 involving 499 citizens. The results demonstrated that, according to citizens, the lack of trust between citizens, and between citizens and the public sector, is a key factor obstructing effective environmental management. The results indicate the level of correlation between how trusting people are; how citizens participate; and how people perceive government legitimacy.     

A study of Cr(VI) in ashes from fluidized bed combustion of municipal solid waste: leaching, secondary reactions and the applicability of some speciation methods

The use of the fluidized bed technique for the combustion of municipal solid waste is a rather new concept. This type of combustor produces ash residues with somewhat different properties than the residues generated from the traditional mass burn techniques. Therefore, chemical characterization and the investigation of toxic metals behavior during ash water reactions are necessary for the safe disposal of these residues. In the present work, the total elemental composition, mineralogy and leaching behavior of ashes from the combustion of municipal solid waste in a fluidized bed combustion boiler have been investigated. The cyclone ash and, in particular, the filter ash contained considerable amounts of soluble substances, thus giving leachates with high levels of Cl-, Na+, K+, Ca2 + and Al(IIl). On the other hand, the two ash fractions taken in the boiler, the bottom and hopper ashes, were much more stable with respect to the release of salts and heavy metals. Since Cr(VI) is mobile and toxic its release from combustion residues can pose environmental problem. Even though the total Cr contents were similar in all ashes studied, the bottom ash gave about a thousand times higher levels of Cr(VI) in test leachates than the hopper, cyclone and filter ashes. However, it was found that the leached amount of Cr(VI) from the bottom ash decreased significantly when bottom ash was mixed with the hopper ash. The most probable cause for this decrease is the coupled oxidation of Al(0) to Al(III) and reduction of dissolved Cr(VI) to Cr(III). This finding that the mixing of two ash streams from the same boiler could result in the immobilization of Cr may point at a simple stabilization method. Selective extraction of water soluble, exchangeable and sparingly soluble forms of Cr(VI) was also investigated. Extraction methods were evaluated for their suitability for ash matrixes. It was found that interferences due to the presence of reducing substances in some ash materials may occur.     

Air pollution perception in ten countries during the COVID-19 pandemic

As largely documented in the literature, the stark restrictions enforced worldwide in 2020 to curb the COVID-19 pandemic also curtailed the production of air pollutants to some extent. This study investigates the perception of the air pollution as assessed by individuals located in ten countries: Australia, Brazil, China, Ghana, India, Iran, Italy, Norway, South Africa and the USA. The perceptions towards air quality were evaluated by employing an online survey administered in May 2020. Participants (N = 9394) in the ten countries expressed their opinions according to a Likert-scale response. A reduction in pollutant concentration was clearly perceived, albeit to a different extent, by all populations. The survey participants located in India and Italy perceived the largest drop in the air pollution concentration; conversely, the smallest variation was perceived among Chinese and Norwegian respondents. Among all the demographic indicators considered, only gender proved to be statistically significant.Supplementary InformationThe online version contains supplementary material available at 10.1007/s13280-021-01574-2.     

Natural radionuclides distribution and environmental impacts of ferruginous sand-siltstone (raw material) and their manufactured Ahmer oxide used as wall paints

Commercially known Ahmer oxide paints are prepared from raw material mainly composed of red iron oxides (hematite) and iron oxyhydroxides. The raw material used in manufacturing of Ahmer oxide comes from some localities in southwest Sinai such as Abu Thor, Allouga, and El lehian. The adsorption of uranium and other radioelements on iron oxides could make the raw material (red iron oxides) and their products environmentally hazardous. The studied samples were subjected to radiometric analysis using NaI (Tl) gamma-ray spectrometer. The average activity concentration of U, Th, Ra, and K are 108.7, 458.8, 88.8, and 627.5?Bq?kg^?1, respectively in raw material and 136.4, 14.6, 58.3, and 95.9?Bq?kg^?1 in Ahmer oxide. High values of activity concentrations of ²³⁸U, ²²⁶Ra, and ⁴⁰K were recorded in Allouga and El lehian raw material. High radioactivities of Allouga and El lehian raw material are mainly attributed to the presence of torbernite, zircon, and monazite, in addition to adsorbed elemental uranium in Ahmer oxide. absorbed dose rate (D), annual effective dose equivalent, radium equivalent activity (Ra_eq), external hazard index (H_ex), and internal hazard index (H_in), as well as representative gamma index (Iγ) were determined from the activity concentrations of ²²⁶Ra, ²³²Th, and ⁴⁰K. Some of the studied samples do not satisfy the universal standards.     

Residues of endosulfan in cotton growing area of Vehari,Pakistan: an assessment of knowledge and awareness of pesticide use and health risks

This study is based on self-reported information collected from selected farmers of Vehari District, Punjab, Pakistan, to determine their technical knowledge and awareness about pesticide use and associated environmental and health risks. Moreover, soil contamination by routinely used persistent organochlorine pesticide, endosulfan, was also evaluated. Survey data revealed very low literacy rate (on an average 9th grade education) and technical knowledge (almost missing) of the farmers in Vehari District. The farmers are unable to fully read and understand the instructions about the use of pesticide marked on the containers. They are not fully aware of pesticide persistence and toxicity (73%), unable to identify cotton pests and diseases (86%), and do not know which crop to grow in cotton adjacent fields (100%). Data also revealed that the farmers (100%) do not follow safety measure during pesticide application and are unaware of pesticide toxicity symptoms in human as well as the basic first-aid practices (89%).

Poor literacy rate and lack of technical knowledge of farmers in Vehari regarding pesticide use and handling are posing serious environmental and health risks among the local inhabitants, particularly among farmers. Soil analysis results showed that concentration of α- and β-endosulfan ranged from 0–14 to 0–14.64 μg/mg, respectively. Principal component analysis showed that soil organic matter is the key soil parameter controlling the occurrence and fate of endosulfan under sandy loam soil conditions of Vehari District. There is a serious need of improving technical and environmental knowledge of farmer about pesticide risks on human health in the studied area, in particular, and the entire country in general. Findings are of great use for policymaking in Pakistan to minimize pesticide risks in Pakistan.