Mikrobielle Sanierung von 2,4,6-Trinitrotoluol (TNT) kontaminierten Böden

Within the limits of a feasability study abouton-site bioremediation methods for TNT-contaminated soils, composting was chosen as a very promising and cheap method. This method was critically compared with those described in the literature and was primarily rated under ecotoxicological aspects. The investigated location is the former munition plant «Tanne» in the aerea of Clausthal-Zellerfeld in Lower Saxony, Germany. To estimate the autochtonic microflora, we assessed the number of aerobic heterotrophic bacteria and determined their respiration activity in soils. In addition, we isolated bacteria and examined their capacity to metabolize TNTin vitro. Both the amount of autochtonic microrganisms (4.7×10⁸ to 1.2×10¹⁰ colony forming units (cfu)/kg dryweight) as well as their respiration activity did not correlate with the concentrations of nitrotoluenes in the soils. With high contaminated soil (20 g TNT/kg dry weight) we carried out a small compost in the range of 10 liters. During 28 days of composting TNT-concentration decrease over 90% and only minor amounts of monoaminodinitrotoluenes were generated. However, an acidic pretreatment of the compost material at the end of the reaction showed that TNT could be partially resolved under these extreme conditions and that an ecotoxicological risk may still exist. Possible changes in the realization of the composting process in order to make sure that the contaminants are savely bound to the humin matrix are discussed.     

Processes involved in uptake and release of nitrogen dioxide from soil and building stones into the atmosphere

Atmospheric NO₂ was taken up by samples of various soils and building stones. The NO₂ uptake rate constants were highest in soil samples taken during the summer months. However, the NO₂ uptake rate constants of the soils and building stones were not significantly correlated with any of the following variables: moisture, pH, ammonium, nitrite, or nitrate. NO₂ uptake by soil and stone was not abolished by autoclaving indicating a chemical uptake process. NO₂ uptake by acidic and air-dry soils and stones resulted in nearly stoichiometric reduction of NO₂ to NO. This reduction was enhanced by the addition of ferrous iron and was further enhanced by incubation under 1 ppmv SO₂. The results suggest that NO₂ reduction may be coupled to oxidation of ferrous to ferric iron which may be reduced again by atmospheric SO₂ thus regenerating the ferrous iron content of the soil or stone. Conversion of NO₂ to NO was not observed in neutral or/and moist soils and stones. NO₂ was also taken up by purified and sterilized quartz sand moistend with water. This uptake was enhanced by addition of humic material but not by addition of bacteria which both had been extracted from genuine soil. Under most conditions, only uptake but no release of NO₂ was observed. However, NO₂ was released in air-dry soils that were heated to 45–65°C, or in ammonium-fertilized soil or stone that was drying up at room temperature. Under the latter conditions mimicking field practice, the NO₂ release reached rates that were similar to the NO release rates.     

Funipuncture for fetocide in late termination of pregnancy

The most widely used method for fetocide in late termination of pregnancy for fetal abnormalities (TOPFA) consists of injecting of potassium chloride (KCl) into the fetal heart and is likely to be painful after 22 weeks of gestation. We studied ten consecutive women undergoing TOPFA between 22 and 38 weeks. This technique for fetocide consisted of a single umbilical vein puncture under ultrasound guidance with injections of sufentanil 5 µg followed by KCl 2 g. No electrocardiographic modifications could be observed and maternal plasma potassium levels did not show any significant variation throughout the procedure. Fetal umbilical phlebotomy for fetal analgesia followed by fetocide therefore appears to be a safe procedure for the mother and allows the fetus to die without pain when late termination of pregnancy (TOP) is indicated. Copyright © 2002 John Wiley & Sons, Ltd.     

Preimplantation genetic diagnosis of the fragile X syndrome by use of linked polymorphic markers

Fragile X syndrome is the most common cause of familial mental retardation. The most common mutation is expansion of a triplet (CGG)_n repeat in the 5′ untranslated region of the FMR1 gene on Xq27.3. The expansion is refractory to PCR due to preferential amplification of the smaller allele in heterozygous cells and the high GC content of the repeat and surrounding sequences. Direct detection of the normal parental alleles in preimplantation embryos has been used for preimplantation genetic diagnosis (PGD) of this disorder. However, this approach is only suitable for approximately 63% of couples due to the heterozygosity of the repeat in the normal population. As an alternative we investigated the use of polymorphic markers flanking the mutation to track the normal and premutation carrying maternal chromosomes in preimplantation embryos. Using a panel of 11 polymorphisms, six (CA)_n repeats and five single nucleotide polymorphisms, diagnosis was developed for 90% of referred couples. Multiplex amplification of informative markers was tested in 300 single buccal cells from interested couples with efficiency and allele drop out (ADO) rates ranging from 69% to 96% and 6% to 18%, respectively. Use of this approach is accurate and applicable to a larger number of patients at risk of transmitting fragile X to their offspring. Copyright © 2001 John Wiley & Sons, Ltd.     

Development of a test method against hot alkaline chemical splashes.

High temperature alkaline chemical liquids have caused injuries and hazardous situations in Finnish pulp manufacturing mills. There are no requirements and/or test method standards concerning protection against high temperature alkaline chemical splashes. This paper describes the test method development process to test and identify materials appropriate for hot liquid chemical hazard protection. In the first phase, the liquid was spilled through a stainless steel funnel and the protection performance was evaluated using a polyvinyl chloride (PVC) film under the test material. After several tentative improvements, a graphite crucible was used for heating and spilling the chemical, and a copper-coated K-type thermometer with 4 independent measuring areas was designed to measure the temperature under the material samples. The thermometer was designed to respond quickly so that peak temperatures could be measured. The main problem was to keep the spilled amount of chemical constant, which unfortunately resulted in significant variability in data.     

Epidemiologic Analysis of Factors Associated with Local Disappearances of Native Ranid Frogs in Arizona

Abstract:  We examined factors that may independently or synergistically contribute to amphibian population declines. We used epidemiologic case–control methodology to sample and analyze a large database developed and maintained by the Arizona Game and Fish Department that describes historical and currently known ranid frog localities in Arizona, U.S.A. Sites with historical documentation of target ranid species ( n = 324) were evaluated to identify locations where frogs had disappeared during the study period (case sites) and locations where frog populations persisted (control sites). Between 1986 and 2003, 117 (36%) of the 324 sites became case sites, of which 105 were used in the analyses. An equal number of control sites were sampled to control for the effects of time. Risk factors, or predictor variables, were defined from environmental data summarized during site surveys and geographic information system data layers. We evaluated risk factors with univariate and multifactorial logistic-regression analyses to derive odds ratios (OR). Odds for local population disappearance were significantly related to 4 factors in the multifactorial model. Disappearance of frog populations increased with increasing elevation (OR = 2.7 for every 500 m, p < 0.01). Sites where disappearances occurred were 4.3 times more likely to have other nearby sites that also experienced disappearances (OR = 4.3, p < 0.01), whereas the odds of disappearance were 6.7 times less (OR = 0.15, p < 0.01) when there was a source population nearby. Sites with disappearances were 2.6 times more likely to have introduced crayfish than were control sites (OR = 2.6, p = 0.04). The identification of factors associated with frog disappearances increases understanding of declines occurring in natural populations and aids in conservation efforts to reestablish and protect native ranids by identifying and prioritizing implicated threats.     

Effects of bed materials on the performance of an anaerobic sequencing batch biofilm reactor treating domestic sewage

The objective of this study was to determine the best performance of an anaerobic sequencing batch biofilm reactor (AnSBBR) based on the use of four different bed materials as support for biomass immobilization. The bed materials utilized were polyurethane foam (PU), vegetal carbon (VC), synthetic pumice (SP), and recycled low-density polyethylene (PE). The AnSBBR, with a total volume of 7.2L, was operated in 8-h batch cycles over 10 months, and fed with domestic sewage with an average influent chemical oxygen demand (COD) of 358+/-110mg/L. The average effluent COD values were 121+/-31, 208+/-54, 233+/-52, and 227+/-51mg/L, for PU, VC, SP, and PE, respectively. A modified first-order kinetic model was adjusted to temporal profiles of COD during a batch cycle, and the apparent kinetic constants were 0.52+/-0.05, 0.37+/-0.05, 0.80+/-0.04, and 0.30+/-0.02h(-1) for PU, VC, SP, and PE, respectively. Specific substrate utilization rates of 1.08, 0.11, and 0.86mg COD/mgVS day were obtained for PU, VC, and PE, respectively. Although SP yielded the highest kinetic coefficient, PU was considered the best support, since SP presented loss of chemical constituents during the reactor's operational phase. In addition, findings on the microbial community were associated with the reactor's performance data. Although PE did not show a satisfactory performance, an interesting microbial diversity was found on its surface. Based on the morphology and denaturing gradient gel electrophoresis (DGGE) results, PE showed the best capacity for promoting the attachment of methanogenic organisms, and is therefore a material that merits further analysis. PU was considered the most suitable material showing the best performance in terms of efficiency of solids and COD removal.