Inactivation of bacteria under visible light and in the dark by Cu films. Advantages of Cu-HIPIMS-sputtered films

Introduction

The Cu polyester thin-sputtered layers on textile fabrics show an acceptable bacterial inactivation kinetics using sputtering methods.

Materials and methods

Direct current magnetron sputtering (DCMS) for 40?s of Cu on cotton inactivated Escherichia coli within 30?min under visible light and within 120?min in the dark. For a longer DCMS time of 180?s, the Cu content was 0.294% w/w, but the bacterial inactivation kinetics under light was observed within 30?min, as was the case for the 40-s sputtered sample.

Results and discussion

This observation suggests that Cu ionic species play a key role in the E. coli inactivation and these species were further identified by X-ray photoelectron spectroscopy (XPS). The 40-s sputtered samples present the highest amount of Cu sites held in exposed positions interacting on the cotton with E. coli. Cu DC magnetron sputtering leads to thin metallic semi-transparent gray?Cbrown Cu coating composed by Cu nanoparticulate in the nanometer range as found by electron microscopy (EM). Cu cotton fabrics were also functionalized by bipolar asymmetric DCMSP.

Conclusion

Sputtering by DCMS and DCMSP for longer times lead to darker and more compact Cu films as detected by diffuse reflectance spectroscopy and EM. Cu is deposited on the polyester in the form of Cu₂O and CuO as quantified by XPS. The redox interfacial reactions during bacterial inactivation involve changes in the Cu oxidation states and in the oxidation intermediates and were followed by XPS. High-power impulse magnetron sputtering (HIPIMS)-sputtered films show a low rugosity indicating that the texture of the Cu nanoparticulate films were smooth. The values of R _q and R _a were similar before and after the E. coli inactivation providing evidence for the stability of the HIPIMS-deposited Cu films. The Cu loading percentage required in the Cu films sputtered by HIPIMS to inactivate E. coli was about three times lower compared to DCMS films. This indicates a substantial Cu metal savings within the preparation of antibacterial films.     

Trace gases and particulate matter emissions from wildfires and agricultural burning in Northeastern Mexico during the 2000 fire season

An inventory of air pollutants emitted from forest and agricultural fires in Northeastern Mexico for the period of January to August of 2000 is presented. The emissions estimates were calculated using an emissions factor methodology. The inventory accounts for the emission of carbon monoxide (CO), methane, nonmethane hydrocarbons, ammonia, nitrogen oxides, and particulate matter (PM). Particulate matter emissions include estimates for fine PM and coarse PM. A total of 2479 wildfires were identified in the domain for the period of interest, which represented approximately 810,000 acres burned and 621,130 short tons emitted (81% being CO). The main source of information used to locate and estimate the extent of the fires came from satellite imagery. A geographic information system was used to determine the type of vegetation burned by each fire. More than 54% of the total area burned during the period of study was land on the State of Tamaulipas. However, >58% of the estimated emissions came from the State of Coahuila. This was because of the mix of vegetation types burned in each state. With respect to the temporal distribution, 76.9% of the fires occurred during the months of April and May consuming almost 78% of the total area burned during the period of study. Analysis of wind forward trajectories of air masses passing through the burned areas and 850-mb wind reanalyses indicate possible transboundary transport of the emissions from Mexico to the United States during the occurrence of the major wildfires identified.     

印度洋-太平洋海洋生态系统的占有:活礁鱼食品贸易的实例研究

我们对珊瑚礁渔业,特别是活礁鱼食品贸易(FT)的生态足迹的分析表明,许多国家目前的消费量超过了估计的可持续的人均全球、地区及地方珊瑚礁生产水平.香港通过其FT需求占有了东南亚年礁鱼生产量135 260～286 560t的25%,超过地区生物生产力8.3倍;礁鱼渔业需求超过印度洋-太平洋和东南亚地区可持续产量2.5～6倍.相比之下,大多数太平洋岛屿靠本身的礁渔业手段维持生计,当地的需求小于大洋洲整个能力的20%.FT每年需要多达40%东南亚的估计礁鱼产量以及几乎所有其估计的(鱼旨)科鱼产量.我们的研究分析结果强调了FT的不可持续性以及对印度洋-太平洋珊瑚礁渔业加以区域管理和保护的迫切必要性.     

Ferulic acid supplementation for 40 days in hair ewe lambs experiencing seasonal heat stress: short-term effects on physiological responses,growth, metabolism,and hematological profile

Environmental Science and Pollution Research - Free ferulic acid (FA) is a natural compound with antioxidant properties which mitigates the negative effects of cold stress in sheep; however, its...     

Geochemistry of leachates from the El Fraile sulfide tailings piles in Taxco, Guerrero, southern Mexico

Leachates from the El Fraile tailings impoundment (Taxco, Mexico) were monitored every 2 months from October 2001 to August 2002 to assess the geochemical characteristics. These leachates are of interest because they are sometimes used as alternative sources of domestic water. Alternatively, they drain into the Cacalotenango creek and may represent a major source of metal contamination of surface water and sediments. Most El Fraile leachates show characteristics of Ca–SO₄, (Ca+Mg)–SO₄, Mg–SO₄ and Ca–(SO₄+HCO₃) water types and are near-neutral (pH=6.3–7.7). Some acid leachates are generated by the interaction of meteoric water with tailings during rainfall events (pH=2.4–2.5). These contain variable levels of SO₄ ²⁻ (280–29,500 mg l⁻¹) and As (<0.01–12.0 mg l⁻¹) as well as Fe (0.025–2352 mg l⁻¹), Mn (0.1–732 mg l⁻¹), Zn (<0.025–1465 mg l⁻¹) and Pb (<0.01–0.351 mg l⁻¹). Most samples show the highest metal enrichment during the dry seasons. Leachates used as domestic water typically exceed the Mexican Drinking Water Guidelines for sulfate, hardness, Fe, Mn, Pb and As, while acidic leachates exceed the Mexican Guidelines for Industrial Discharge Waters for pH, Cu, Cd and As. Speciation shows that in near-neutral solutions, metals exist mainly as free ions, sulfates and bicarbonates, while in acidic leachates they are present as sulfates and free ions. Arsenic appears as As^(V) in all samples. Thermodynamic and mineralogical evidence indicates that precipitation of Fe oxides and oxyhydroxides, clay minerals and jarosite as well as sorption by these minerals are the main processes controlling leachate chemistry. These processes occur mainly after neutralization by interaction with bedrock and equilibration with atmospheric oxygen.     

The fate of nitrogen in a moderately alkaline and calcareous soil amended with biosolids and urea

The determination of nitrogen (N) based loading rates for land application of biosolids is challenging and site specific. Over loading may contribute to environmental, agricultural, or human health problems. The objective of this study was to monitor N mineralization and losses in a moderately alkaline and calcareous desert soil amended with either anaerobically digested (AN) or lime-stabilized (LS) biosolids, and irrigated with and without urea enriched water. For Experiment 1, N inputs, leaching and residuals in soil were evaluated in an open soil column system. For Experiment 2, ammonia (NH₃) emissions were evaluated in a closed soil column system. In Experiment 1, AN and LS biosolids increased soil ON (organic N) by three and two fold, respectively. Respective net N mineralization of ON from biosolids alone was 90% and 62% without urea, and 71% and 77%, respectively with added urea. Nitrogen leaching losses and residuals in amended soil did not account for all N inputs into the soil/biosolids system. In Experiment 2, NH₃ emissions were not significantly different among treated soils with or without added urea, except LS amended soil receiving urea. Ammonia losses did not account for unaccounted N in Experiment 1. We concluded that deep placement and rapid mineralization of AN biosolids promoted anaerobic soil conditions and denitrification, in addition to the high denitrification potential of desert soil. LS biosolids showed greater potential than AN biosolids for safe and beneficial land application to desert soils regardless of biosolids placement and the inclusion of N rich irrigation water.     

Constructing sustainable palm oil: how actors define sustainability

Biofuels as a renewable source of energy have gained considerable importance in recent years. The use of biofuels is expected to rise since national governments of developed nations like the US and European countries see it as one of the ways to fulfill climate targets and increase the security in their energy supply. Production of biofuels is also expected to rise as developing nations see in biofuels the opportunity for connecting to international markets through supplying a new demand in the energy market.Several studies report on the environmental, social and economic gains and detriments that can arise from increased biofuel production and consumption. However, research that provides insight into the way in which such issues are defined by actors within the product chain is scarce. In this article we analyse how the strategies and value definitions of actors involved in the production and consumption of biofuels lead to specific definitions of sustainability. The empirical material concerns the chain of palm oil production in Colombia and electricity generation in the Netherlands. It is analysed using the method of action-in-context, which allows us to uncover the level and source of diversity of sustainability definitions in the product chain.While the current growth in production of palm oil is definitely buyer driven, the analysis of various activities in the chain shows that several aspects of sustainability are defined in more complex actor fields throughout the product chain.     

Potential application of a semi-quantitative method for mercury determination in soils, sediments and gold mining residues

An alternative, low cost method for analyzing mercury in soil, sediment and gold mining residues was developed, optimized and applied to 30 real samples. It is semiquantitative, performed using an acid extraction pretreatment step, followed by mercury reduction and collection in a detecting paper containing cuprous iodide. A complex is formed with characteristic color whose intensity is proportional to mercury concentration in the original sample. The results are reported as range of concentration and the minimum detectable is 100 ng/g. Method quality assurance was performed by comparing results obtained using the alternative method and the Cold Vapor Atomic Absorption Spectrometry techniques. The average results from duplicate analysis by CVAAS were 100% coincident with alternative method results. The method is applicable for screening tests and can be used in regions where a preliminary diagnosis is necessary, at programs of environmental surveillance or by scientists interested in investigating mercury geochemistry.