Study On the Hydraulic Characteristics of Taichung Harbour in Taiwan

For this study, field measurements of current profiles, buoy trajectories and the lag of two tidal stations were performed to explore the flow characteristics of Taichung Harbour. in order to distinguish the effects of wind drift current on circulation inside Taichung Harbour, field surveys during both summer and monsoon (winter) season were completed separately. the speed of the drift current was about 3.5% that of the, wind speed, based on the field data. the horizontal dispersion coefficients were close to Bowden's (1965) formula for the tidal current. the water temperature showed a two-layer profile, with the mixing thickness about 4 to 6 metres for the upper layer. the corresponding Richardson number was about 70. the tidal lag between the two tidal stations was 9.68 minutes. All the results agree well with the theoretical results.     

Optimization for solidification of low-level-radioactive resin using Taguchi analysis

Solidification of low-level-radioactive (LLW) resin was optimized using Taguchi analytical methodology. The ingredients in LLW mortar which caused the solidification of cement were evaluated through consecutive measurements of the effects of various concentrations of ingredients. Samples selected according to Taguchi's method were separated into 18 different categories and measured at the 7th, 21st, and 28th day after fabrication on developing effects. Evaluations of the various samples focused on whether the compressive and bending strength fulfilled the special criteria of the Taiwan Power Company (TPC). Similar results indicated that both furnace slag and fly ash were the dominant material resulting from the solidification of LLW mortar. The superior combination was obtained as furnace slag 24 wt.%, fly ash 24 wt.%, and cement 8 wt.% to mix 24 wt.% of resin with 20 wt.% of water, to fulfill the contemporary requirements of TPC.     

采用重选法处理蚀刻废液零排放资源化新工艺

阐述了广州市白云区南溪化工厂开发出的一套国内首创的对线路板蚀刻废液进行大规模集中资源化处理的零排放处理新工艺,这套新工艺采用重力分选的方法将在固相条件下生成的氧化铜分离出来,克服了原有工艺的缺陷,达到了理想的分离效果,使废液中所有的成分能够在较低的处理成本下全部分离回收,完全无三废排出,达到了清洁生产的要求。     

A novel method to make regenerable core-shell calcium-based sorbents

A sorbent having a calcium oxide core and a clay shell was prepared and shown to be capable of reusable applications in absorption and desorption processes for carbon dioxide. The novelty of this sorbent is that only calcium carbonate and clay are used for its preparation with water as a binder. A two-step granulation procedure is used to get the core and then another step to coat the shell layer with the clay powder. A repeated wet-and-dry procedure probably makes the core porous yet strong enough to serve as a sorbent. The pellet is then calcined at 1200 degrees C for 2h to reach its final structure. The core-shell pellets have an overall diameter of 4.4mm with average shell thickness of 0.45 mm, crush load of 35 N and attrition index of 0.035 wt%/h. These results indicate that the pellets will probably be capable of withstanding the stress in future applications. Carbon dioxide absorption at or below 300 degrees C showed a maximum weight gain of 38% for our pellets. Finally, desorption in nitrogen at 800 degrees C can restore the pellet to its original state and hence it is ready for re-use as a sorbent.     

Estimating the change of porosity in the saturated zone during air sparging

Introduction A ir sparging rem oves volatile organic conta- m inants from a saturated zone by com bining volatilization and aerobic biodegradation. A ir is injected below the w ater table through a slotted screen in a sparging w ell, and then rises to the…     

Characterization of spent nickel–metal hydride batteries and a preliminary economic evaluation of the recovery processes

Valuable metal materials can be recovered from spent nickel–metal hydride (NiMH) batteries. However, little attention has been paid to the metal compositions of individual components of NiMH batteries, although this is important for the selection of the appropriate recycling process. In this study, NiMH batteries were manually disassembled to identify the components and to characterize the metals in each of these. A preliminary economic analysis was also conducted to evaluate the recovery of valuable metals from spent NiMH batteries using thermal melting versus simple mechanical separation. The results of this study show that metallic components account for more than 60% of battery weight. The contents of Ni, Fe, Co, and rare earth elements (REEs) (i.e., valuable metals of interest for recovery) in a single battery were 17.9%, 15.4%, 4.41%, and 17.3%, respectively. Most of the Fe was in the battery components of the steel cathode collector, cathode cap, and anode metal grid, while Ni (>90%) and Co (>90%) were mainly in the electrode active materials (anode and cathode metal powders). About 1.88 g of REEs (Ce, La, and Y) could be obtained from one spent NiMH battery. The estimated profits from recovering valuable metals from spent NiMH batteries by using thermal melting and mechanical processes are 2,329 and 2,531 USD/ton, respectively, when including a subsidy of 1,710 USD/ton. The findings of this study are very useful for further research related to technical and economic evaluations of the recovery of valuable metals from spent NiMH batteries. Implications: The spent nickel–metal hydride (NiMH) batteries were manually disassembled and their components were identified. The metals account for more than 60% of battery weight, when Ni, Fe, Co, and rare earth elements (REEs) were 17.9%, 15.4%, 4.41%, and 17.3%, respectively, in a single battery. The estimated profits of recovering valuable metals from NiMH batteries by using thermal melting and mechanical processing are 2,329 and 2,531 USD/ton, respectively, when including a subsidy of 1,710 USD/ton. These findings are very useful to develop or select the recovery methods of valuable metals from spent NiMH batteries.     

云南蛇纹岩发育土壤与植被中重金属含量的分析

对云南蛇纹岩发育土壤进行了植物和土壤的重金属含量调查和分析.结果表明,Ni、Co为土壤中的主要污染金属,在土壤中的含量范围分别为565~4844mg/kg和69~481mg/kg,Cu、Zn含量则在正常范围内;土壤中Ni、Co生物可利用态的含量均较低.统计分析显示,土壤中Ni、Co含量之间存在显著正相关(R=0.794,P<0.01).调查蛇纹岩发育土壤上隶属21科的42种高等植物,并分析其重金属含量,发现植物体内Ni、Co含量也存在显著相关,可能受到土壤因素的影响所致.调查并未发现Ni、Co的超累积植物,但发现此区域存在较多的Ni、Co耐性植物,对Ni矿废弃地的植被重建有一定的研究意义.图1表6参8     

云南省澜沧江流域环境规划研究

环境规划必须从研究人类经济开发对环境造成的影响和环境条件对经济开发的制约入手。本研究把整个澜沧江流域作为一个人类———环境———经济系统，应用遥感技术和最新遥感信息源，遵循整体性原则、定性和定量分析相结合的原则、开放性原则和分解协调原则，确定了六大环境问题。今后资源开发中，规划区面临环境污染与生态破坏两大挑战。结合脱贫致富工程，划分三个一级环境区和六个二级环境亚区，强化环境管理，建设生态农业，推行清洁生产，合理利用资源，实施可持续发展战略。     

Infant exposure to polychlorinated dibenzo-p-dioxins, dibenzofurans and biphenyls (PCDD/Fs, PCBs)--correlation between prenatal and postnatal exposure

Polychlorinated dibenzo-p-dioxins, dibenzofurans (PCDD/Fs) and polychlorinated biphenyls (PCBs) are recognized environmental endocrine disruptors, which are environmentally persistent and may bio-accumulate in human bodies. Pregnant and nursing women may pass these pollutants to their babies both trans-placentally and lactationally. We measured and examined correlations of the levels of PCDD/Fs and PCBs in perinatal venous serum, placenta, umbilical-cord serum (representing prenatal exposure), and breast milk (postnatal exposure). Subjects included pregnant women without clinical complication between the ages of 25 and 35, who delivered their babies during 2000.12.01 and 2001.11.30 in central Taiwan. A total of 20 participants were randomly selected from those provided the four biological specimens for analysis of 17 PCDD/Fs, and 12 dioxin-like PCBs and six indicator PCBs using high-resolution gas chromatography/high-resolution mass spectrometry. Higher PCDD/F levels were found in placenta (10.3 TEq-pg/g lipid) and venous serum (9.1 TEq-pg/g lipid) compared to those in breast milk (7.6 TEq-pg/g lipid). Pearson and Spearman correlation analyses showed well association of PCDD/F and PCB levels between different specimens. The total dioxin/PCB level in milk, venous and cord serum can be well predicted by that in placenta through regression functions. This first study of multi-specimen correlation further established rather consistent ratios of these chemical concentrations in various specimens relative to those in venous serum.     

Regulating colored textile wastewater by 3/31 wavelength ADMI methods in Taiwan

The wastewater from textile dyeing facilities is difficult to treat satisfactorily because of high compositional variability and high color intensity. To reduce colored effluents discharged into watercourses, the government of Taiwan adopted the Effluent True Color Standard in 1998. The true color discharge limit is 400 American Dye Manufactures Institute (ADMI) units. The adopted analytical method is the ADMI Tristimulus Filter Method (3 wavelength (WL) method), and the 31 WL ADMI method might be also adopted as an alternative for color value measurement. The refractory nature of textile dyes and the introduction of this new regulation present an environmental challenge to the Taiwanese textile industry. The main objectives of this study were to (1) evaluate the efficacy of current wastewater treatment systems for controlling the colored textile wastewater discharges, and (2) evaluate the correlations between 3 and 31 WL ADMI methods. Ten representative textile wastewater treatment facilities employing biological and chemical coagulation treatment technologies were selected to perform a 10-consecutive-day effluent sampling and analysis. Results show that a significant difference between 3 and 31 ADMI methods was observed. These two ADMI methods cannot be substituted for each other, and the discharge standard should be determined based on the selected testing method. Investigation results also suggest that the commonly used wastewater treatment technology (biological + chemical coagulation) fails to effectively remove dye from the colored textile wastewater. Sodium hypochlorite (NaOCl) addition was applied by most facilities as the temporary post-polishment step to comply with the color discharge standard.