Identification of Putative Geographically Isolated Wetlands of the Conterminous United States

Geographically isolated wetlands (GIWs) are wetlands completely surrounded by uplands. While common throughout the United States (U.S.), there have heretofore been no nationally available, spatially explicit estimates of GIW extent, complicating efforts to understand the myriad biogeochemical, hydrological, and habitat functions of GIWs and hampering conservation and management efforts at local, state, and national scales. We used a 10‐m geospatial buffer as a proxy for hydrological or ecological connectivity of National Wetlands Inventory palustrine and lacustrine wetland systems to nationally mapped and available stream, river, and lake data. We identified over 8.3 million putative GIWs across the conterminous U.S., encompassing nearly 6.5 million hectares of wetland resources (average size 0.79 ± 4.81 ha, median size 0.19 ha). Putative GIWs thus represent approximately 16% of the freshwater wetlands of the conterminous U.S. The water regime for the majority of the putative GIWs was temporarily or seasonally flooded, suggesting a vulnerability to ditching or hydrologic abstraction, sedimentation, or alterations in precipitation patterns. Additional analytical applications of this readily available geospatially explicit mapping product (e.g., hydrological modeling, amphibian metapopulation, or landscape ecological analyses) will improve our understanding of the abundance and extent, effect, connectivity, and relative importance of GIWs to other aquatic systems of the conterminous U.S.     

Linking Theory and Practice for Restoration of Step-Pool Streams

Step-pools sequences are increasingly used to restore stream channels. This increase corresponds to significant advances in theory for step-pools in recent years. The need for step-pools in stream restoration arises as urban development encroaches into steep terrain in response to population pressures, as stream channels in lower-gradient areas require stabilization due to hydrological alterations associated with land-use changes, and as step-pools are recognized for their potential to enhance stream habitats. Despite an increasingly voluminous literature and great demand for restoration using step-pool sequences, however, the link between theory and practice is limited. In this article, we present four unique cases of stream restoration using step-pools, including the evolution of the approaches, the project designs, and adjustments in the system following restoration. Baxter Creek in El Cerrito, California demonstrates an early application of artificial step-pools in which natural adjustments occurred toward geomorphic stability and ecological improvement. Restoration of East Alamo Creek in a large residential development near San Ramon, California illustrates an example of step-pools increasingly used in locations where such a channel form would not naturally occur. Construction of a step-pool channel in Karnowsky Creek within the Siuslaw National Forest, Oregon overcame constraints posed by access and the type and availability of materials; the placement of logs allowed natural scouring below steps. Dry Canyon Creek on the property of the Mountains Restoration Trust in Calabasas, California afforded a somewhat experimental approach to designing step-pools, allowing observation and learning in the future. These cases demonstrate how theories and relationships developed for step-pool sequences over the past two decades have been applied in real-world settings. The lessons from these examples enable us to develop considerations useful for deriving an appropriate course of design, approval, and construction of artificial step-pool systems. They also raise additional fundamental questions concerning appropriate strategies for restoration of step-pool streams. Outstanding challenges are highlighted as opportunities for continuing theoretical work.     

Translating science into policy: using ecosystem thresholds to protect resources in Rocky Mountain National Park

Concern over impacts of atmospheric nitrogen deposition to ecosystems in Rocky Mountain National Park, Colorado, has prompted the National Park Service, the State of Colorado Department of Public Health and Environment, the Environmental Protection Agency, and interested stakeholders to collaborate in the Rocky Mountain National Park Initiative, a process to address these impacts. The development of a nitrogen critical load for park aquatic resources has provided the basis for a deposition goal to achieve resource protection, and parties to the Initiative are now discussing strategies to meet that goal by reducing air pollutant emissions that contribute to nitrogen deposition in the Park. Issues being considered include the types and locations of emissions to be reduced, the timeline for emission reductions, and the impact of emission reductions from programs already in place. These strategies may serve as templates for addressing ecosystem impacts from deposition in other national parks.     

Degradation of ethylenethiourea pesticide metabolite from water by photocatalytic processes

In this study, photocatalytic (photo-Fenton and H₂O₂/UV) and dark Fenton processes were used to remove ethylenethiourea (ETU) from water. The experiments were conducted in a photo-reactor with an 80 W mercury vapor lamp. The mineralization of ETU was determined by total organic carbon analysis, and ETU degradation was qualitatively monitored by the reduction of UV absorbance at 232 nm. A higher mineralization efficiency was obtained by using the photo-peroxidation process (UV/H₂O₂). Approximately 77% of ETU was mineralized within 120 min of the reaction using [H₂O₂]₀ = 400 mg L^?1. The photo-Fenton process mineralized 70% of the ETU with [H₂O₂]₀ = 800 mg L^?1 and [Fe²⁺] = 400 mg L^?1, and there is evidence that hydrogen peroxide was the limiting reagent in the reaction because it was rapidly consumed. Moreover, increasing the concentration of H₂O₂ from 800 mg L^?1 to 1200 mg L^?1 did not enhance the degradation of ETU. Kinetics studies revealed that the pseudo-second-order model best fit the experimental conditions. The k values for the UV/H₂O₂ and photo-Fenton processes were determined to be 6.2 × 10^?4 mg L^?1 min^?1 and 7.7 × 10^?4 mg L^?1 min^?1, respectively. The mineralization of ETU in the absence of hydrogen peroxide has led to the conclusion that ETU transformation products are susceptible to photolysis by UV light. These are promising results for further research. The processes that were investigated can be used to remove pesticide metabolites from drinking water sources and wastewater in developing countries.     

Improved Spatial Allocation Methodology for On-Road Mobile Emissions

ABSTRACT

Emissions from automobiles and trucks operating on public roads represent a major portion of the air pollutants included in emission inventories. When emission data are prepared for air quality modeling studies, such as those supporting development of a State Implementation Plan, an emission processor matches the spatial and temporal resolution of the emissions to the requirements of the modeling study. However, the spatial location of vehicular emissions is not known and must be estimated. This paper presents a methodology for determining the spatial distribution of the roads belonging to a road class using geospatial data functions, such as those commonly provided by a geographic information system. Vehicle-miles traveled (VMT) are then allocated to medium-resolution (12 x 12-km) and fine-resolution (4 x 4-km) modeling grids using both this methodology and the existing top-down methodology, which uses population density. The results show a significant difference in the spatial distribution of VMT between these two methodologies. Based upon these results, we recommend using the road class-specific methodology in lieu of the population methodology for spatially allocating vehicular emissions for medium- and finer-resolution modeling grids.     

Tundra in the Rain: Differential Vegetation Responses to Three Years of Experimentally Doubled Summer Precipitation in Siberian Shrub and Swedish Bog Tundra

Precipitation amounts and patterns at high latitude sites have been predicted to change as a result of global climatic changes. We addressed vegetation responses to three years of experimentally increased summer precipitation in two previously unaddressed tundra types: Betula nana-dominated shrub tundra (northeast Siberia) and a dry Sphagnum fuscum-dominated bog (northern Sweden). Positive responses to approximately doubled ambient precipitation (an increase of 200 mm year^?1) were observed at the Siberian site, for B. nana (30 % larger length increments), Salix pulchra (leaf size and length increments) and Arctagrostis latifolia (leaf size and specific leaf area), but none were observed at the Swedish site. Total biomass production did not increase at either of the study sites. This study corroborates studies in other tundra vegetation types and shows that despite regional differences at the plant level, total tundra plant productivity is, at least at the short or medium term, largely irresponsive to experimentally increased summer precipitation.     

The adsorption of short single-stranded DNA oligomers to mineral surfaces

We studied the adsorption of short single-stranded deoxyribonucleic acid (ssDNA) oligomers, of approximately 30 nucleotides (nt) in length, of varying sequence, adenine + guanine + cytosine (AGC) content, and propensity to form secondary structure, to equal surface area samples of olivine, pyrite, calcite, hematite, and rutile in 0.1 M NaCl, 0.05 M pH 8.1 KHCO₃ buffer. Although the mineral surfaces have widely varying points of zero charge, under these conditions they show remarkably similar adsorption of ssDNA regardless of oligomer characteristics. Mineral surfaces appear to accommodate ssDNA comparably, or ssDNA oligomers of this length are able to find binding sites of comparable strength and density due to their flexibility, despite the disparate surface properties of the different minerals. This may partially be due charge shielding by the ionic strength of the solutions tested, which are typical of many natural environments. These results may have some bearing on the adsorption and accumulation of biologically derived nucleic acids in sediments as well as the abiotic synthesis of nucleic acids before the origin of life.     

Incidence of thyroid disease following exposure to polybrominated biphenyls and polychlorinated biphenyls, Michigan, 1974-2006

Thyroid hormones, which influence body metabolism and development, could be affected by persistent organic pollutants. We sought to examine the relationship between polybrominated biphenyls (PBBs) and polychlorinated biphenyls (PCBs) and thyroid disease. We employed incidence density sampling to perform a nested case control analysis of the Michigan Long-Term PBB Cohort. Cohort members (n = 3333) were exposed to PBBs through contaminated cattle feed in 1973-1974 and to PCBs through daily life. Those with detectable serum PBB and PCB concentrations at enrollment were categorized into tertiles of PBB and PCB exposure. Case-patients were cohort members answering “Yes” to “Has a healthcare provider ever told you that you had a thyroid problem?” during follow-up interviews; control-patients were cohort members answering “No”. We used odds ratios (OR) with 95% confidence intervals (CI) to compare odds of thyroid disease by PBB and PCB exposure and by various risk factors. Total cumulative thyroid disease incidence after 33 years was 13.9% among women and 2.6% among men. After adjusting for body mass index, we found no statistically significant differences in odds of any type of thyroid disease among women or men with elevated PBB or PCB exposure. Compared to control-patients, women with thyroid disease had increased odds of being overweight/obese (OR = 2.82, 95% CI: 1.94-4.11) and developing infertility (OR = 1.71, 95% CI: 1.08-2.69), diabetes (OR = 1.61, 95% CI: 1.04-2.51), or arthritis (OR = 1.71, 95% CI: 1.18-2.50) during follow-up. Additional research should explore potential associations between PBBs/PCBs and thyroid disease among children exposed in utero.     

A plea to implement robustness into a breeding goal: poultry as an example

The combination of breeding for increased production and the intensification of housing conditions have resulted in increased occurrence of behavioral, physiological, and immunological disorders. These disorders affect health and welfare of production animals negatively. For future livestock systems, it is important to consider how to manage and breed production animals. In this paper, we will focus on selective breeding of laying hens. Selective breeding should not only be defined in terms of production, but should also include traits related to animal health and welfare. For this we like to introduce the concept of robustness. The concept of robustness includes individual traits of an animal that are relevant for health and welfare. Improving robustness by selective breeding will increase (or restore) the ability of animals to interact successfully with the environment and thereby to make them more able to adapt to an appropriate husbandry system. Application of robustness into a breeding goal will result in animals with improved health and welfare without affecting their integrity. Therefore, in order to be ethically acceptable, selective breeding in animal production should accept robustness as a breeding goal. L. Star, E. D. Ellen contributed equally to this work. Star belongs to the Adaptation Physiology Group, Wageningen University, and the rest of the authors belong to the Animal Breeding and Genomics Centre, Wageningen University.     

Prenatal diagnosis for Epidermolysis bullosa: a study of 144 consecutive pregnancies at risk

Epidermolysis bullosa (EB) is a group of inherited disorders characterized by increased skin fragility, resulting in blisters and erosions after minor trauma. Mutations in 10 structural genes expressed in the cutaneous basement membrane zone have been reported. The DebRA Molecular Diagnostics Laboratory at Jefferson Medical College has performed 144 DNA-based prenatal diagnoses since 1993 in families at risk for recurrence of the most severe forms of EB, including the recessive dystrophic EB (RDEB), junctional EB (JEB), EB with pyloric atresia (EB-PA), and EB simplex (EBS). A mutation-detection strategy using either conformation-sensitive gel electrophoresis (CSGE) or denaturing high-performance liquid chromatography (dHPLC) scanning analysis, followed by nucleotide sequencing, was applied to most cases with DEB and to all JEB, EB-PA, and EBS families. For some RDEB families, linkage analysis was performed, either alone when the inheritance pattern was clear or in combination with one mutation. Among the 144 prenatal diagnoses, 63 were for RDEB, 69 for JEB, 6 for EB-PA, and 6 for EBS. Twenty-eight normal, 73 heterozygous carrier, and 28 affected RDEB, JEB, and EB-PA pregnancies were reported in these recessively inherited diseases. Two affected and four normal pregnancies were predicted in dominantly inherited EBS. Among the 144 pregnancies, 9 were terminated without confirmation, 13 cases were lost to follow-up, and 6 pregnancies are ongoing. There were 6 families with inconclusive results due either to recombination events between flanking markers, absence of informative markers for one allele, or lack of sample from the previously affected child. There were three discordant results, one that was explained by maternal contamination of the chorionic villus sample and two that were unresolved. Overall, the availability, relative ease, and over 98% success rate make molecular DNA-based prenatal diagnosis a viable option for EB families at risk. Copyright © 2003 John Wiley & Sons, Ltd.