MBBR处理制药废水的试验研究

采用二级移动床生物膜反应器(MBBR)处理呋喃铵盐制药废水。在填充比为40%,总水力停留时间为32h时,COD的去除率为88.6%,TN的去除率为25.7%,第二级反应器对NH3-N的去除率为56.2%。     

Effectiveness evaluation of water-sprinkling in controlling urban fugitive road dust based on TRAKER method: A case study in Baoding, China

Fugitive road dust (FRD) contributes a great deal to urban rainwater and air pollution and is commonly controlled by water-sprinkling in most Chinese cities. However, there is a lack of information on its effectiveness. We used the Testing Re-entrained Aerosol Kinetic Emissions from Roads (TRAKER) method to monitor different types of roads in Baoding city before and within 1 hr after water-sprinkling and obtained the road dirtiness index (a) and PM concentration in the road environment ($T_{\mathrm{T}}^{*}$), to evaluate the removal efficiency for PM deposited on the road surface (${\eta }_a$) and the reduction efficiency for the PM concentration in the road environment (${\eta }_{\text{PM}}$). The results give that the ${\eta }_a$ for three types of roads is ranked: branch road (87%-–100%) > major arterial road (80%-83%) > minor arterial road (68%-77%), and the ${\eta }_{\text{PM}}$ ranked: minor arterial road (70%) > branch road (46%-58%) > major arterial road (37%-53%). The ${\eta }_a$ and ${\eta }_{\text{PM}}$ varied non-linearly with time and presented a quadratic curve. The average effective control time (${\eta }_{\mathit{a}}$> 0) was 62 min on the major and minor arterial roads, and much longer than 1 hr on branch roads. The ${\eta }_{\text{PM}}$ values diminished completely by 72 min on average from the end of sprinkling for the three types of roads. Water-sprinkling can remove PM₁₀ particles from the road surface and reduce their concentration in the road environment more thoroughly than PM_2.5. Our findings could be helpful for controlling urban FRD emissions more efficiently and precisely.     

Insights into reactive oxygen species formation induced by water-soluble organic compounds and transition metals using spectroscopic method

Ambient particulate matter (PM) can cause adverse health effects via their ability to produce Reactive Oxygen Species (ROS). Water-Soluble Organic Compounds (WSOCs), a complex mixture of organic compounds which usually coexist with Transition Metals (TMs) in PM, have been found to contribute to ROS formation. However, the interaction between WSOCs and TMs and its effect on ROS generation are still unknown. In this study, we examined the ROS concentrations of V, Zn, Suwannee River Fulvic Acid (SRFA), Suwannee River Humic Acid (SRHA) and the mixtures of V/Zn and SRFA/SRHA by using a cell-free 2′,7′-Dichlorodihydrofluorescein (DCFH) assay. The results showed that V or Zn synergistically promoted ROS generated by SRFA, but had an antagonistic effect on ROS generated by SRHA. Fluorescence quenching experiments indicated that V and Zn were more prone to form stable complexes with aromatic humic acid-like component (C1) and fulvic acid-like component (C3) in SRFA and SRHA. Results suggested that the underlying mechanism involving the fulvic acid-like component in SRFA more tending to complex with TMs to facilitate ROS generation through π electron transfer. Our work showed that the complexing ability and complexing stability of atmospheric PM organics with metals could significantly affect ROS generation. It is recommended that the research deploying multiple analytical methods to quantify the impact of PM components on public health and environment is needed in the future.     

BCO分光光度法快速测定含铜三氯化铁蚀刻废液中的铜

采用双环已酮草酰二腙 (简称BCO)光度法 ,对含铜三氯化铁蚀刻废液综合利用过程中铜的快速测定进行了研究。重点对铁基体对于铜测定的干扰情况进行了研究。在选择的最佳分析条件下 ,测定三氯化铁蚀刻废液综合利用过程含铜浓度为 0 4 6g L的还原液时 ,其相对标准偏差和加标回收率分别为 1 0 5 %、99 2 1%、10 0 2 %。本方法简单快速 ,测定 1～ 2个样品仅需 30min。     

载La(Ⅲ)-和Fe(Ⅲ)-氨基膦酸型螯合树脂对氟吸附性能的比较

研究并比较了载La（Ⅲ）和载Fe（Ⅲ）大孔氨基膦酸型螯合树脂对饮用水中氟离子的吸附特性。氟在载La（Ⅲ）和载Fe（Ⅲ）的螯合树脂上的吸附不随pH的变化而改变,载金属螯合树脂对氟的饱和吸附容量分别为3.78、3.55mg/g,吸附方式符合Freundlich吸附等温式,代表性竞争离子不影响氟在螯合树脂上的吸附。结果表明载Fe（Ⅲ）和载La（Ⅲ）的螯合树脂是一种有前景的饮水氟去除吸附剂。     

二级出水中磷的混凝处理研究

以北京市某污水处理厂的二级出水中总磷为去除对象,通过混凝的静态烧杯实验[1],确定了二级出水除磷效果较好的絮凝剂聚合氯化铁(PFC)[2]和Al2(SO4)3[3]混合使用的最佳投药量,使出水中磷(TP)符合再生水水质标准的要求.絮凝剂组合时静态混凝烧杯实验表明:PFC-Al2(SO4)3体积比1∶1时,最佳投药量离子浓度比为:Fe3 /Al3 ∶9.9/7(mg·L-1),此时TP去除率为93%,浊度去除率为33%.PFC-Al2(SO4)3体积比1:2时,最佳投药量离子浓度比为:Fe3 /Al3 ∶4.95/7(mg·L-1),此时TP去除率为88%,浊度去除率为71%.     

反应堆控制棒驱动机构电机温升试验研究

目的 研究电机在不同工况下的温升情况,完成电机散热能力评估,为电机散热优化和工程通风设计提供参考.方法 模拟驱动机构实际运行环境,在断风条件下进行自然散热温升试验,获取电机温升最大工作模式,并在该模式下进行2种风速条件下的通风试验,获取定子绕组的平衡温度.当定子绕组达到热平衡后,切断通风,进行断风试验,获取最大断风时间.结果 电机温升最大时,工作模式为三相通电,增大风速可降低定子外壁温度,提高定子绕组与定子外壁的温差.三相通电工况下,5 m/s和8 m/s风速下最大断风时间分别为15 min和22 min.结论 开展了电机温升试验研究,获得了典型工况下电机的温升状况,为电机散热优化和工程通风设计提供了参考.     

处理含油废水絮凝剂最佳配方的筛选

针对含油废水，选择合适种类的絮凝剂，通过评价絮凝剂的除油效果，筛选出适合处理石油化工行业含油废水的絮凝剂最佳配方．其主要特点是投加量少、除油效果好、价格适宜。     

乡镇企业环境保护工作初探

近年来，乡镇企业蓬勃发展的趋势要求我们必须重视其环境保护工作．笔者通过联系当地的实际情况力图阐明自己对于如何搞好乡镇企业环境保护工作的一些观点。     

中─高级变质相中水热流体的形成与作用

固体地壳中流体是普遍存在的，中—高级变质相中的矿物并非只发生晶体塑性变形，溶解和溶移作用在非糜棱岩化岩石中占主导地位，因为高温高压环境下存在的水热流体，在变质变形作用中起着至关重要的作用。在周围分布有网络状进进剪切带的递进缩短带中，与应交梯度有直接关系的单个矿物的位错密度梯度在其晶体边缘形成，产生了化学位梯度，从而使矿物边缘发生溶解。变形分解作用是产生这一过程的动力，并为流体汇聚形成水热循环系统提供了空间。