Estimation of regional building-related C&D debris generation and composition: case study for Florida, US

Methodology for the accounting, generation, and composition of building-related construction and demolition (C&D) at a regional level was explored. Six specific categories of debris were examined: residential construction, nonresidential construction, residential demolition, nonresidential demolition, residential renovation, and nonresidential renovation. Debris produced from each activity was calculated as the product of the total area of activity and waste generated per unit area of activity. Similarly, composition was estimated as the product of the total area of activity and the amount of each waste component generated per unit area. The area of activity was calculated using statistical data, and individual site studies were used to assess the average amount of waste generated per unit area. The application of the methodology was illustrated using Florida, US approximately 3,750,000 metric tons of building-related C&D debris were estimated as generated in Florida in 2000. Of that amount, concrete represented 56%, wood 13%, drywall 11%, miscellaneous debris 8%, asphalt roofing materials 7%, metal 3%, cardboard 1%, and plastic 1%. This model differs from others because it accommodates regional construction styles and available data. The resulting generation amount per capita is less than the US estimate - attributable to the high construction, low demolition activity seen in Florida.     

Learning-by-catching: uncertain invasive-species populations and the value of information

This paper develops a model of invasive species control when the species’ population size is unknown. In the face of an uncertain population size, a resource manager's species-control efforts provide two potential benefits: (1) a direct benefit of possibly reducing the population of invasive species, and (2) an indirect benefit of information acquisition (due to learning about the population size, which reduces uncertainty). We provide a methodology that takes into account both of these benefits, and show how optimal management decisions are altered in the presence of the indirect benefit of learning. We then apply this methodology to the case of controlling the Brown Treesnake (Boiga irregularis) on the island of Saipan. We find that the indirect benefit—the value of information to reduce uncertainty—is likely to be quite large.     

Primate Conservation along the Tana River, Kenya: An Examination of the Forest Habitat

The Tana River National Primate Reserve, Kenya, was established in 1976 to preserve the endemic and endangered Tana River red colobus ( Colobus badius rufomitratus ) and crested mangabey ( Cercocebus galeritus galeritus ). Between 1975 and 1985 their populations declined by 80% and 45%, respectively. A study addressing primate-to-habitat relationships was conducted in 12 forest areas to determine what attributes appear most important to the in situ preservation of both endangered primates. Correlations among the abundances of primate groups, their group sizes, and the structural, resource, disturbance, and spatial attributes of the forest were used to distinguish the quality of forest patches. Intraforest habitat quality was examined, using canonical variate analysis to discriminate primate ranging patterns based on canopy and subcanopy tree composition. The colobus and mangabey show positive relationships to interior-forest habitat and appear susceptible to forest disturbances that reduce forest area or that increase forest edge and intraforest disturbance. Forest loss, fragmentation, and consequent reduction in the area-to-perimeter ratio of the remaining forests measured from 1960 to 1975 provide a partial explanation for the decline in primate populations. The results suggest that a combination of primary food items and seasonal food resources in large, high-stature, closed-canopy forests is the best predictor of high-quality habitat for these monkeys. Stewardship should be directed at the preservation of these areas or the restoration of forests toward this habitat model     

Vermicomposting toilets, an alternative to latrine style microbial composting toilets, prove far superior in mass reduction, pathogen destruction, compost quality, and operational cost

Composting toilets aim to recycle excrement into safe, stable humus. Preceding this, low costs, low risks, and mass reduction should be ensured. Source separating vermicomposting toilets (SSVCs) outperformed mixed latrine microbial composting toilets (MLMCs) in all categories. MLMCs: incurred ten times greater operational costs; created 10x more operator exposure; employed no proven pathogen reduction mechanism since solid end-products averaged 71,000 ± 230,000 CFU/g (fecal-origin) Escherichia coli and 24 ± 5% total solids, consistently failed NSF/ANSI Standard 41; failed to reduce volatile solids compared to raw fecal matter; increased total contaminated dry mass by 274%, and produced alkaline end-product (8.0 ± 0.7) high in toxic free ammonia (Solvita® 2.6 ± 1.5). SSVCs have low maintenance costs and risks; adequate worm density for pathogen destruction (0.03 ± 0.04 g-worm/g-material); reduced E. coli 200 ± 244 CFU/g in neutral (7.4 ± 0.3), stable (60 ± 10% volatile solids), and mature (4 ± 0 Solvita® NH₃) end-product.     

Growth and Clean Air

The keynote address to the 72nd annual meeting of the Air Pollution Control Association was presented by R.W. Baldwin. His remarks follow:     

Fog Chemistry at an Urban Midwestern Site

This work investigates the oxidative aging of preformed secondary organic aerosol (SOA) derived from α-pinene ozonolysis (～100 ppb_v hydrocarbon [HC_x] with excess of O₃) within the University of California–Riverside Center for Environmental Research and Technology environmental chamber that occurs after introduction of additional hydroxyl (OH) and nitrate (NO₃) radicals. Simultaneous measurements of SOA volume concentration, hygroscopicity, particle density, and elemental chemical composition (C:O:H) reveal increased particle wall-loss-corrected SOA formation (1.5%, 7.5%, and 15.1%), increase in oxygen-to-carbon ratio (O/C; 15.6%, 8.7%, and 8.7%), and hydrophilicity (4.2%, 7.4%, and 1.4%) after addition of NO (ultraviolet [UV] on), H₂O₂ (UV on), and N₂O₅ (dark), respectively. The processing observed as an increase in O/C and hydrophilicity is attributed to OH and NO₃ reactions with first-generation vapor products and UV photolysis. The rate of increase in O/C appears to be only sufficient to achieve semivolatile oxygenated organic aerosol (SV-OOA) on a day time scale even at the raised chamber radical concentrations. The additional processing with UV irradiation without addition of NO, H₂O₂, or N₂O₅ is observed, adding 5.5% wall-loss-corrected volume. The photolysis-only processing is attributed to additional OH generated from photolysis of the nitrous acid (HONO) offgasing from chamber walls. This finding indicates that OH and NO₃ radicals can further alter the chemical composition of SOA from α-pinene ozonolysis, which is proved to consist of first-generation products.

Implications: Secondary organic aerosol (SOA) may undergo aging processes once formed in the atmosphere, thereby altering the physicochemical and toxic properties of aerosol. This study discusses SOA aging of a major biogenic volatile organic compound (VOC; α-pinene) after it initially forms SOA. Aging of the α-pinene ozonolysis system by OH (through NO or H₂O₂ injection), NO₃ (through N₂O₅ injection), and photolysis is observed. Although the reaction rate appears to be only sufficient to achieve semivolatile oxygenated organic aerosol (SV-OOA) level of oxygenation on a 1-day scale, it is important that SOA aging be considered in ambient air quality models. Aging in this study is attributed to further oxidation of gas-phase oxidation products of α-pinene ozonolysis.

Supplemental Materials: Supplemental materials are available for this paper. Go to the publisher's online edition of the Journal of the Air &; Waste Management Association for information on the referenced α-pinene ozonolysis reaction and chamber reactor temperature.     

Integrated approach to PCE‐impacted site characterization,site management,and enhanced bioremediation

Tetrachloroethene (PCE)‐ and trichloroethene (TCE)‐impacted sites pose significant challenges even when site characterization activities indicate that biodegradation has occurred naturally. Although site‐specific, regulatory, and economic factors play roles in the remedy‐selection process, the application of molecular biological tools to the bioremediation field has streamlined the assessment of remedial alternatives and allowed for detailed evaluation of the chosen remedial technology. The case study described here was performed at a PCE‐impacted site at which reductive dechlorination of PCE and TCE had led to accumulation of cis‐dichlorethene (cis‐DCE) with concentrations ranging from approximately 10 to 100 mg/L. Bio‐Trap® samplers and quantitative polymerase chain reaction (qPCR) enumeration of Dehalococcoides spp. were used to evaluate three remedial options: monitored natural attenuation, biostimulation with HRC®, and biostimulation with HRC‐S®. Dehalococcoides populations in HRC‐S‐amended Bio‐Traps deployed in impacted wells were on the order of 10³ to 10⁴ cells/bead but were below detection limits in most unamended and HRC‐amended Bio‐Traps. Thus the in situ Bio‐Trap study identified biostimulation with HRC‐S as the recommended approach, which was further evaluated with a pilot study. After the pilot HRC‐S injection, Dehalococcoides populations increased to 10⁶ to 10⁷ cells/bead, and concentrations of cis‐DCE and vinyl chloride decreased with concurrent ethene production. Based on these results, a full‐scale HRC‐S injection was designed and implemented at the site. As with the pilot study, full‐scale HRC‐S injection promoted growth of Dehalococcoides spp. and stimulated reductive dechlorination of the daughter products cis‐DCE and vinyl chloride. © 2008 Wiley Periodicals, Inc.