An examination of oxidant amounts on secondary organic aerosol formation and aging

The effect of HO_x radicals (OH and HO₂) and ozone (O₃) on aerosol formation and aging has been studied. Experiments were performed in presence as well as in absence of oxygen in a flow-through chamber at 299 K for three organic precursor gases, isoprene, α-pinene and m-xylene. The HO_x source was the UV photolysis of humidified air or nitrogen and was measured with a GTHOS (Ground-based Tropospheric Hydrogen Oxides Sensor). The precursor gases concentration was monitored with an online GC-FID. The aerosol mass was then quantified by a Tapered Element Oscillating Microbalance (TEOM). Typical oxidant mixing ratios were (0–4.5) ppm for O₃, 200 pptv for OH and 3 ppbv for HO₂. A simple kinetics model is used to infer the aerosol production mechanism. In the present of O₃ (or O₂), the SOA yields were 0.46, 0.036 and 0.12 for α-pinene with an initial concentration of 100 ppbv (RH = 37%), isoprene with an initial concentration of 177 ppbv (RH = 50%) and m-xylene with an initial concentration of 100 ppbv (RH = 37%), respectively. When the chosen precursor gases reacted with HO_x in the absence of O₃, the maximum SOA yields were significantly increased by factors of 1.6 for isoprene 1.1 for α-pinene, and 3 for m-xylene respectively. The comparison of the calculated and measured potential aerosol mass concentrations as function of time shows that presence of ozone or oxygen can influence the aerosol yield and the absence of ozone or oxygen in the system resulted in high concentrations of its organic aerosol products.     

Large outdoor chamber experiments and computer simulations: (I) Secondary organic aerosol formation from the oxidation of a mixture of d-limonene and α-pinene

This work merges kinetic models for α-pinene and d-limonene which were individually developed to predict secondary organic aerosol (SOA) formation from these compounds. Three major changes in the d-limonene and α-pinene combined mechanism were made. First, radical–radical reactions were integrated so that radicals formed from both individual mechanisms all reacted with each other. Second, all SOA model species from both compounds were used to calculate semi-volatile partitioning for new semi-volatiles formed in the gas phase. Third particle phase reactions for particle phase α-pinene and d-limonene aldehydes, carboxylic acids, etc. were integrated. Experiments with mixtures of α-pinene and d-limonene, nitric oxide (NO), nitrogen dioxide (NO₂), and diurnal natural sunlight were carried out in a dual 270 m³ outdoor Teflon film chamber located in Pittsboro, NC. The model closely simulated the behavior and timing for α-pinene, d-limonene, NO, NO₂, O₃ and SOA. Model sensitivities were tested with respect to effects of d-limonene/α-pinene ratios, initial hydrocarbon to NO_x (HC₀/NO_x) ratios, temperature, and light intensity. The results showed that SOA yield (Y_SOA) was very sensitive to initial d-limonene/α-pinene ratio and temperature. The model was also used to simulate remote atmospheric SOA conditions that hypothetically could result from diurnal emissions of α-pinene, d-limonene and NO_x. We observed that the volatility of the simulated SOA material on the aging aerosol decreased with time, and this was consistent with chamber observations. Of additional importance was that our simulation did not show a loss of SOA during the daytime and this was consistent with observed measurements.     

Can secondary organic aerosol formed in an atmospheric simulation chamber continuously age?

This work investigates the oxidative aging process of SOA derived from select aromatic (m-xylene) and biogenic (α-pinene) precursors within an environmental chamber. Simultaneous measurements of SOA hygroscopicity, volatility, particle density, and elemental chemical composition (C:O:H) reveal only slight particle aging for up to the first 16 h of formation. The chemical aging observed is consistent with SOA that is decreasing in volatility and increasing in O/C and hydrophilicity. Even after aging, the O/C (0.25 and 0.40 for α-pinene and m-xylene oxidation, respectively) was below the OOAI and OOAII ambient fractions measured by high-resolution aerosol mass spectra coupled with Positive Matrix Factorization (PMF). The rate of increase in O/C does not appear to be sufficient to achieve OOAI or OOAII levels of oxygenation within regular chamber experiment duration. No chemical aging was observed for SOA during dark α-pinene ozonolysis with a hydroxyl radical scavenger present. This finding is consistent with observations by other groups that SOA from this system is comprised of first generation products.     

A chamber study of secondary organic aerosol formation by linalool ozonolysis

The formation of secondary organic aerosol (SOA) produced from linalool ozonolysis was examined using a dynamic chamber system that allowed the simulation of ventilated indoor environments. Experiments were conducted under room temperature (22–23 °C) and air exchange rate of 0.67 h^?1. An effort was made to maintain the product of the concentrations of the two reagents constant. The results suggest that under the conditions when the product of the two reagent concentrations was constant, the relative concentrations play an important role in determining the total SOA formed. A combination of concentrations somewhere in ozone limiting region will produce the maximum SOA concentration. The measured reactive oxygen species (ROS) concentrations at linalool and ozone concentrations relevant to prevailing indoor concentrations ranged from 0.71 to 2.53 nmol m^?3 equivalents of H₂O₂. It was found that particle samples aged for 24 h lost a significant fraction of the ROS compared to fresh samples. The residual ROS concentrations were around 15–69%. Compared with other terpene species like α-pinene that has one endocyclic unsaturated carbon bond, linalool was less efficient in potential SOA formation yields.     

An important pathway for ozonolysis of alpha-pinene and beta-pinene in aqueous phase and its atmospheric implications

The aqueous ozonolysis of α-pinene and β-pinene was conducted under simulated tropospheric conditions at different pHs and temperatures. Three kinds of products, peroxides, carbonyl compounds, and organic acids, were well characterized, and the detection of these products provides effective evidence for understanding the atmospheric aqueous reaction pathway. We have two interesting findings: (1) the unexpected formation of methacrolein (MACR), with a yield of ～40%, in the α-pinene–O₃ aqueous reaction indicates a potentially new SOA formation pathway, because MACR is one of the important precursors of SOA; and (2) the surprisingly high yields of H₂O₂, ～60% for the α-pinene–O₃ reaction and ～100% for the β-pinene–O₃ reaction, indicates that H₂O₂ can be a significant contributor to the origin and transformation of oxidants in the atmosphere, especially in the humid regions. Moreover, we have determined the rate constant for aqueous reaction between MACR and H₂O₂ in pH 2 to 7 and obtained its upper limit as 0.13 M L^?1 s^?1. A mechanism concerning the formation of the species mentioned above is proposed, and it differs from that in the gas-phase reaction. We suggest that water plays a key role in the mechanism, by participating in the reactions as a direct reactant and by removing the excess energy of intermediates formed in the reactions.     

The effects of increasing atmospheric ozone on biogenic monoterpene profiles and the formation of secondary aerosols

Monoterpenes are biogenic volatile organic compounds (BVOCs) which play an important role in plant adaptation to stresses, atmospheric chemistry, plant–plant and plant–insect interactions. In this study, we determined whether ozonolysis can influence the monoterpenes in the headspace of cabbage. The monoterpenes were mixed with an air-flow enriched with 100, 200 or 400 ppbv of ozone (O₃) in a Teflon chamber. The changes in the monoterpene and O₃ concentrations, and the formation of secondary organic aerosols (SOA) were determined during ozonolysis. Furthermore, the monoterpene reactions with O₃ and OH were modelled using reaction kinetics equations. The results showed that all of the monoterpenes were unequally affected: α-thujene, sabinene and d-limonene were affected to the greatest extend, whereas the 1,8-cineole concentration did not change. In addition, plant monoterpene emissions reduced the O₃ concentration by 12–24%. The SOA formation was dependent on O₃ concentration. At 100 ppbv of O₃, virtually no new particles were formed but clear SOA formation was observed at the higher ozone concentrations. The modelled results showed rather good agreements for α-pinene and 1,8-cineole, whereas the measured concentrations were clearly lower compared to modelled values for sabinene and limonene. In summary, O₃-quenching by monoterpenes occurs beyond the boundary layer of leaves and results in a decreased O₃ concentration, altered monoterpene profiles and SOA formation.     

Heterogeneous SOA yield from ozonolysis of monoterpenes in the presence of inorganic acid

The secondary organic aerosol (SOA) yield of a series of montoerpenes was investigated to determine the relative amounts of organic mass, which can be attributed to mass produced by heterogeneous acid-catalyzed reactions. Five monoterpenes (α-pinene, terpinolene, d-limonene, Δ²-carene, β-pinene) were studied using a 2 m³ indoor Teflon chamber and SOA was created in the presence of both acidic and neutral inorganic seed aerosol. The relative humidity was varied to create differing acidic seed environments. The heterogeneous aerosol production was influenced by the seed mass concentration, the acidity of the inorganic seed aerosol, and also molecular structure of the monoterpene ozonolysis products. This study also can be incorporated with our previously presented model of the kinetic expression for SOA mass production from heterogeneous acid-catalyzed reactions.     

A kinetic mechanism for predicting secondary organic aerosol formation from toluene oxidation in the presence of NOx and natural sunlight

A kinetic mechanism to predict secondary organic aerosol (SOA) formation from the photo-oxidation of toluene was developed. Aerosol phase chemistry that includes nucleation, gas–particle partitioning and particle-phase reactions as well as the gas-phase chemistry of toluene and its degradation products were represented. The mechanism was evaluated against experimental data obtained from the University of North Carolina (UNC) 270 m³ dual outdoor aerosol smog chamber facility. The model adequately simulates the decay of toluene, the nitric oxide (NO) to nitrogen dioxide (NO₂) conversion and ozone formation. It also provides a reasonable prediction of SOA production under different conditions that range from 15 to 300 μg m⁻³. Speciation of simulated aerosol material shows that up to 70% of the aerosol mass comes from oligomers and polymers depending on initial reactant concentrations. The dominant particle-phase species predicted by the mechanism are glyoxal oligomers, ketene oligomers from the photolysis of the toluene OH reaction product 2-methyl-2,4-hexadienedial, organic nitrates, methyl nitro-phenol analogues, C7 organic peroxides, acylperoxy nitrates and for the low-concentration experiments, unsaturated hydroxy nitro acids.     

Effects of particle acidity and UV light on secondary organic aerosol formation from oxidation of aromatics in the absence of NOx

Recent laboratory observations have shown that particle acidity increases secondary organic aerosol (SOA) yields. However, these studies have mainly focused on biogenic precursors such as isoprene and terpenes. In this paper, the effects of particle acidity on the SOA yields from aromatic precursors under both dark and UV–visible light conditions were characterized through controlled chamber experiments. SOA was produced from oxidation of toluene and 1,3,5-trimethylbenzene (135-TMB) with OH radicals created by ozonolysis of 2-methyl-2-butene (MB). Particle acidity, described with proton concentrations, varied with inorganic seed aerosol composition and humidity (20–52%). Overall, in the presence of acidic seeds, greater increases in SOA yields were observed for the toluene system than the 135-TMB system. UV irradiation reduced SOA yields for both toluene and 135-TMB systems to different extents.     

Determination of aerosol yields from 3-methylcatechol and 4-methylcatechol ozonolysis in a simulation chamber

Secondary Organic Aerosol (SOA) formation during the ozonolysis of 3-methylcatechol (3-methyl-1,2-dihydroxybenzene) and 4-methylcatechol (3-methyl-1,2-dihydroxybenzene) was investigated using a simulation chamber (8 m³) at atmospheric pressure, room temperature (294 ± 2 K) and low relative humidity (5–10%). The initial mixing ratios were as follows (in ppb): 3-methylcatechol (194–1059), 4-methylcatechol (204–1188) and ozone (93–531). The ozone and methylcatechol concentrations were followed by UV photometry and GC–FID (Gas chromatography–Flame ionization detector), respectively and the aerosol production was monitored using a SMPS (Scanning Mobility Particle Sizer). The SOA yields (Y) were determined as the ratio of the suspended aerosol mass corrected for wall losses (M_o) to the total reacted methylcatechol concentrations assuming a particle density of 1.4 g cm^?3. The aerosol formation yield increases as the initial methylcatechol concentration increases, and leads to aerosol yields ranging from 32% to 67% and from 30% to 64% for 3-methylcatechol and 4-methylcatechol, respectively. Y is a strong function of M_o and the organic aerosol formation can be expressed by a one-product gas/particle partitioning absorption model. These data are comparable to those published in a recent study on secondary organic aerosol formation from catechol ozonolysis. To our knowledge, this work represents the first investigation of SOA formation from the ozone reaction with methylcatechols.     

Modeling secondary organic aerosol formation from oxidation of α-pinene, β-pinene, and d-limonene

The biogenic species α-pinene, β-pinene, and d-limonene are among the most abundant monoterpenes emitted globally. They are also important precursors to secondary organic aerosol (SOA) formation in the atmosphere. This study involves the development of proposed oxidation mechanisms for these three species. Semi- and non-volatile oxidation products with the potential to lead to SOA formation are predicted explicitly. Simulation code that describes the gas-phase oxidation mechanisms including reactions that lead to ozone (O₃) formation is coupled to an equilibrium absorptive partitioning code. The coupled model is used to simulate both gas-phase chemistry and SOA formation associated with oxidation of these three species in chamber experiments involving single as well as multiple oxidants. For the partitioning model, required molecular properties of the oxidation products are taken from the literature or estimated based on structural characteristics. The predicted O₃ and SOA concentrations are typically within ±50% of measured values for most of the experiments except for the experiments with low initial hydrocarbon concentrations and the nitrate radical experiments with α-pinene. The developed model will be used to update a gas-phase chemical mechanism and a SOA formation module used in a three-dimensional air quality model.     

Estimates of the contributions of biogenic and anthropogenic hydrocarbons to secondary organic aerosol at a southeastern US location

An organic tracer-based method containing laboratory and field study components was used to estimate the secondary organic aerosol (SOA) contributions of biogenic and anthropogenic hydrocarbons to ambient organic carbon (OC) concentrations in PM_2.5 during 2003 in Research Triangle Park, NC. In the laboratory, smog chamber experiments were conducted where isoprene, α-pinene, β-caryophyllene, and toluene were individually irradiated in the presence of NO_X. In each experiment, SOA was collected and analyzed for potential tracer compounds, whose concentrations were used to calculate a mass fraction of tracer compounds for each hydrocarbon. In the field, 33 PM_2.5 samples were collected and analyzed for (1) tracer compounds observed in the laboratory irradiations, (2) levoglucosan, a biomass burning tracer, and (3) total OC. For each of the four hydrocarbons, the SOA contributions to ambient OC concentrations were estimated using the tracer concentrations and the laboratory-derived mass fractions. The estimates show SOA formation from isoprene, α-pinene, β-caryophyllene, and toluene contributed significantly to the ambient OC concentrations. The relative contributions were highly seasonal with biomass burning in the winter accounting for more than 50% of the OC concentrations, while SOA contributions remained low. However, during the 6-month period between May and October, SOA from the precursor hydrocarbons contributed more than 40% of the measured OC concentration. Although the tracer-based method is subject to considerable uncertainty due to the simplification of replacing the complex set of chemical reactions responsible for SOA with a laboratory-derived single-valued mass fraction, the results suggest this approach can be used to identify major sources of SOA which can assist in the development of air quality models.     

Contributions of biogenic volatile organic compounds to the formation of secondary organic aerosols over Mt. Tai,Central East China

To better understand the contribution of biogenic volatile organic compounds to the formation of secondary organic aerosol (SOA) in high mountain regions, ambient aerosols were collected at the summit of Mt. Tai (1534 m, a.s.l.), Central East China (CEC) during the Mount Tai Experiment 2006 campaign (MTX2006) in early summer. Biogenic SOA tracers for the oxidation of isoprene, α/β-pinene, and β-caryophyllene were measured using gas chromatography/mass spectrometry. Most of the biogenic SOA tracers did not show clear diurnal variations, suggesting that they are formed during long-range atmospheric transport or over relatively long time scales. Although isoprene- and α/β-pinene-derived SOA tracers did not correlate with levoglucosan (a biomass burning tracer), β-caryophyllinic acid showed a good correlation with levoglucosan, indicating that crop residue burning may be a source for this acid. Total concentrations of isoprene oxidation products are much higher than those of α/β-pinene and β-caryophyllene oxidation products. The averaged ratio of isoprene to α/β-pinene oxidation products (R_iso/pine) was 4.9 and 6.7 for the daytime and nighttime samples, respectively. These values are among the highest in the aerosols reported in different geographical regions, which may be due to the large isoprene fluxes and relatively high levels of oxidants such as OH in CEC. Using a tracer-based method, we estimated the concentrations of secondary organic carbon (SOC) derived from isoprene, α/β-pinene, and β-caryophyllene to be 0.42–3.1 μgC m^?3 (average 1.6 μgC m^?3) during the daytime and 0.11–4.2 μgC m^?3 (1.7 μgC m^?3) during the nighttime. These values correspond to 2.9–23% (10%) and 3.2–28% (9.8%) of the total OC concentrations, in which isoprene-derived SOC accounts for 58% and 63% of total SOC during the daytime and nighttime, respectively. This study suggests that isoprene is a more significant precursor for biogenic SOA than α/β-pinene and β-caryophyllene at high altitudes in CEC.     

Evaluation of the UNC toluene-SOA mechanism with respect to other chamber studies and key model parameters

In a companion paper by Hu et al. [2007. A kinetic mechanism for predicting secondary organic aerosol formation from toluene oxidation in the presence of NO_x and natural sunlight. Atmospheric Environment, doi:10.1016/j.atmosenv.2007.04.025], a kinetic mechanism was developed from data generated in the University of North Carolina's (UNC) 270 m³ dual outdoor aerosol smog chamber, to predict secondary organic aerosol (SOA) formation from toluene oxidation in the atmosphere. In this paper, experimental data sets from European Photoreactor (EUPHORE), smog chambers at the California Institute of Technology (Caltech), and the UNC 300 m³ dual-outdoor gas phase chamber were used to evaluate the toluene mechanism. The model simulates SOA formation for the ‘low-NO_x’ and ‘mid-NO_x’ experiments from EUPHORE chambers reasonably well, but over-predicts SOA mass concentrations for the ‘high-NO_x’ run. The model well simulates the SOA mass concentrations observed from the Caltech chambers. Experiments with the three key toluene products, 1,4-butenedial, 4-oxo-2-pentenal and o-cresol in the presence of oxides of nitrogen (NO_x) are also simulated by the developed mechanism. The model well predicts the NO_x time–concentration profiles and the decay of these two carbonyls, but underestimates ozone (O₃) formation for 4-oxo-2-pentenal. It well simulates SOA formation from 1,4-butenedial but overestimates (possibly due to experimental problems) the measured aerosol mass concentrations from 4-oxo-2-pentenal. The model underestimates SOA production from o-cresol, mostly due to its under-prediction of o-cresol decay. The effects of varying temperature, relative humidity, glyoxal uptake, organic nitrate yields, and background seed aerosol concentrations, were also investigated.     

Seasonal dependence of the oxidation capacity of the city of Santiago de Chile

The oxidation capacity of the highly polluted urban area of Santiago de Chile has been evaluated during a winter measurement campaign from May 25 to June 07, 2005, with the results compared and contrasted with those previously evaluated during a summer campaign from March 8 to 20, 2005. The OH radical budget was evaluated in both campaigns employing a simple quasi-photostationary state model (PSS) constrained with simultaneous measurements of HONO, HCHO, O₃, NO, NO₂, j(O¹D), j(NO₂), 13 alkenes and meteorological parameters. In addition, a zero dimensional photochemical box model based on the Master Chemical Mechanism (MCMv3.1) has been used for the analysis of the radical budgets and concentrations of OH, HO₂ and RO₂. Besides the above parameters, the MCM model has been constrained by the measured CO and other volatile organic compounds (VOCs) including alkanes and aromatics. Total production and destruction rates of OH and HO₂ in winter are about two times lower than that during summer. Simulated OH levels by both PSS and MCM models are similar during the daytime for both winter and summer indicating that the primary OH sources and sinks included in the simple PSS model are predominant. On a 24 h basis, HONO photolysis was shown to be the most important primary OH radical source comprising 81% and 52% of the OH initiation rate during winter and summer, respectively followed by alkene ozonolysis (12.5% and 29%), photolysis of HCHO (6.1% and 15%), and photolysis of O₃ (<1% and 4%), respectively. During both winter and summer, there was a balance between the OH secondary production (HO₂ + NO) and destruction (OH + VOCs) showing that initiation sources of RO₂ and HO₂ are no net OH initiation sources. This result was found to be fulfilled also for all other studies investigated. Seasonal impacts on the radical budgets are also discussed.     

Aerosols formed from the chemical reaction of monoterpenes and ozone

Chamber experiments were conducted to study the aerosol products from the ozonolysis of the major atmospheric monoterpenes; α-pinene, β-pinene and limonene. It was found that the α-pinend–O₃ reaction produced mainly 2′. 2′-dimethyl-3′-acetyl cyclobutyl ethanal (pinonaldehyde), the β-pinene–O₃ reaction, mainly 6,6-dimethyl-bicyclo [3.1.1] heptan-2-one and the limonene–O₃ reaction, several unidentified products. These products were sought in forest aerosols and pinonaldehyde was detected in the atmosphere.     

Temperature dependence of secondary organic aerosol

Temperature was found to have a dramatic effect on secondary organic aerosol formation from two ozonolysis systems, cyclohexene and α-pinene. Isothermal experiments were conducted for both systems where the lowest temperature, 278 K, formed approximately 2.5–3 times and 5–6 times the SOA formed at 300 K and 318 K, respectively. Changing the cyclohexene system temperature to a different isothermal experimental set point after completion of SOA formation did not lead to sufficient condensation/evaporation to reproduce the SOA formation at other temperature set points. When the system temperature was cycled between two set points at the end of an experiment, the α-pinene system showed reversibility between the initial temperature 318 K and 300 K. For temperature cycles between the initial temperature of 300 K–318 K, an irreversible loss of mass is observed after the first heating cycle with reversibility observed between subsequent temperature cycles. The SOA formed at 278 K was reversible over a 22 K range but was unable to evaporate sufficiently to match the SOA mass formed at 300 K. Hygroscopicity measurements, taken after the completion of SOA formation, indicate that hygroscopicity of the aerosol is also a function of temperature and that the aerosol does not continue to be oxidized after initial growth is complete. The differing hygroscopicity of the semi-volatile component of the aerosol is evident during system temperature changes after completion of the experiment.     

Evaluation of a detailed model of secondary organic aerosol formation from α-pinene against dark ozonolysis experiments

BOREAM, a detailed model for the gas-phase oxidation of α-pinene and its subsequent formation of Secondary Organic Aerosol (SOA), is tested against a large set of SOA yield measurements obtained in dark ozonolysis experiments. For the majority of experiments, modelled SOA yields are found to agree with measured yields to within a factor 2. However, the comparisons point to a general underestimation of modelled SOA yields at high temperatures (above 30 °C), reaching an order of magnitude or more in the worst cases, whereas modelled SOA yields are often overestimated at lower temperature (by a factor of about 2). Comparisons of results obtained using four different vapour pressure prediction methods indicate a strong sensitivity to the choice of the method, although the overestimated temperature dependence of the yields is found in all cases. Accounting for non-ideality of the aerosol mixture (based on an adapted UNIFAC method) has significant effects, especially at low yields. Our simulations show that the formation of oligomers through the gas-phase reactions of Stabilised Criegee Intermediates (SCI) with other molecular organic products could increase the SOA yield significantly only at very low relative humidity (below 1%). Further tests show that the agreement between model and measurements is improved when the ozonolysis mechanism includes additional production of non-volatile compounds.     

A new environmental chamber for evaluation of gas-phase chemical mechanisms and secondary aerosol formation

A new state-of-the-art indoor environmental chamber facility for the study of atmospheric processes leading to the formation of ozone and secondary organic aerosol (SOA) has been constructed and characterized. The chamber is designed for atmospheric chemical mechanism evaluation at low reactant concentrations under well-controlled environmental conditions. It consists of two collapsible 90 m³ FEP Teflon film reactors on pressure-controlled moveable frameworks inside a temperature-controlled enclosure flushed with purified air. Solar radiation is simulated with either a 200 kW Argon arc lamp or multiple blacklamps. Results of initial characterization experiments, all carried out at 300–305 K under dry conditions, concerning NO_x and formaldehyde offgasing, radical sources, particle loss rates, and background PM formation are described. Results of initial single organic–NO_x and simplified ambient surrogate–NO_x experiments to demonstrate the utility of the facility for mechanism evaluation under low NO_x conditions are summarized and compared with the predictions of the SAPRC-99 chemical mechanism. Overall, the results of the initial characterization and evaluation indicate that this new environmental chamber can provide high quality mechanism evaluation data for experiments with NO_x levels as low as 2 ppb, though the results indicate some problems with the gas-phase mechanism that need further study. Initial evaluation experiments for SOA formation, also carried out under dry conditions, indicate that the chamber can provide high quality secondary aerosol formation data at relatively low hydrocarbon concentrations.     

Sensitivity of biogenic secondary organic aerosols to future climate change at regional scales: An online coupled simulation

Biogenic emissions and secondary organic aerosols (SOA) are strongly dependent on climatic conditions. To understand the SOA levels and their sensitivity to future climate change in the United States (U.S.), we present a modeling work with the consideration of SOA formation from the oxidation of biogenic emissions with atmospheric oxidants (e.g., OH, O₃, and NO₃). The model simulation for the present-day climate is evaluated against satellite and ground-based aerosol measurements. Although the model underestimates aerosol concentrations over the northwestern U.S. due to the lack of fire emissions in the model simulations, overall, the SOA results agree well with previous studies. Comparing with the available measurements of organic carbon (OC) concentrations, we found that the amount of SOA in OC is significant, with the ratio ranging from 0.1 to 0.5/0.6. The enhanced modeling system driven by global climate model output was also applied for two three-year one-month simulations (July, 2001–2003 and 2051–2053) to examine the sensitivity of SOA to future climate change. Under the future two emissions scenarios (A1B and A2), future temperature changes are predicted to increase everywhere in the U.S., but with different degrees of increase in different regions. As a result of climate change in the future, biogenic emissions are predicted to increase everywhere, with the largest increase (～20%) found in the southeastern and northwestern U.S. under the A1B scenario. Changes in SOA are not identical with those in biogenic emissions. Under the A1B scenario, the biggest increase in SOA is found over Texas, with isoprene emissions being the major contributor to SOA formation. The range of change varies from 5% over the southeast region to 26% over Texas. The changes in either biogenic emissions or SOA under the two climate scenarios are different due to the differences in climatic conditions. Our results also suggest that future SOA concentrations are also influenced by several other factors such as the partitioning coefficients, the atmospheric oxidative capability, primary organic carbon aerosols and anthropogenic emissions.