Characterization of particulate matter concentrations during controlled indoor activities

Indoor sources have been identified as a major contributor to the increase of particle concentration in indoor environments. The work presented here is a study of the characteristics of particulate matter number size distribution and mass concentration under controlled indoor activities in a laboratory room. The objective is to characterize particulate matter concentrations indoors resulted under the influence of specific sources. Measurements were performed in an empty laboratory (period September–October 2006) using a GRIMM SMPS+C system (particle size range between 11.1 and 1083.3 nm), a DustTrak Aerosol Monitor (TSI) and a P-Trak Ultrafine Particle Counter (TSI). The studied indoor activities included candle burning, hot plate heating, water boiling, onion frying, vacuuming, hair drying, hair spraying, smoking and burning of incense stick. The AMANpsd computer algorithm was used to evaluate the modal structure of measured particle number size distribution data. Furthermore, the change of the particle number size distribution shape under the influence of different emission sources was studied versus time. Finally the particle emission rates were computed. High particle number concentrations were observed during smoking, onion frying, candle burning and incense stick burning. The highest particle mass concentrations were measured during smoking and hair spraying. The shift of the particle size distribution to larger diameters suggests the presence of strong coagulation effect during candle burning, incense stick burning, smoking and onion frying. The size distribution was mainly bimodal during onion frying and candle burning, whereas the size distribution remained unimodal during incense stick burning and smoking experiments.     

Insight into selected emerging micropollutant interactions with wastewater colloidal organic carbon: implications for water treatment and analysis

Environmental Science and Pollution Research - This study reports how adding a membrane filter (0.45-μm cellulose nitrate filter) between a glass fibre filter and the solid phase extraction...     

In vitro toxicity of selected fungicides from the groups of benzimidazoles and demethylation inhibitors to Cladobotryum dendroides and Agaricus bisporus

Twenty microfungal isolates were collected from diseased fruiting bodies of Agaricus bisporus sampled from Serbian mushroom farms during 2003–2007. Based on morphological characteristics and pathogenicity tests, the isolates were identified as Cladobotryum dendroides. The isolates of C. dendroides and A. bisporusF56 and U3 were tested for sensitivity to several selected fungicides in vitro. C. dendroides isolates were found to be more sensitive to prochloraz manganese and flusilazole + carbendazim than to the other fungicides tested (EC₅₀ values were 0.09 and 0.11 mg L^{? 1}, respectively) and weakly resistant to thiophanate-methyl (EC₅₀ values ranged between 6.53 and 12.09 mg L^{? 1}). Selectivity indexes of the tested fungicides on both C. dendroidesand A. bisporusindicated that thiophanate-methyl, cyproconazole + carbendazim and flusilazole + carbendazim had much less selective fungitoxicity than benomyl, carbendazim and prochloraz manganese.     

Fate of saline ions in a planted landfill site with leachate recirculation

Recirculation of leachate on a covered landfill site planted with willows or other highly evapotranspirative woody plants is an inexpensive option for leachate management. In our study, a closed landfill leachate recirculation system was established on a rehabilitated municipal solid waste landfill site with planted landfill cover. The main objective of the study was to evaluate the sustainability of the system with regard to high hydraulic loads of the landfill leachate on the landfill cover and high concentrations of saline ions, especially potassium (K⁺), sodium (Na⁺) and chloride (Cl^?), in leachate.The results of intensive monitoring, implemented during May 2004 and September 2007, including leachate, soil and plant samples, showed a high sustainability of the system regarding saline ions with the precipitation regime of the studied region. Saline ion concentrations in leachates varied between 132 and 2592 mg Cl^? L^?1, 69 and 1310 mg Na⁺ L^?1 and between 66 and 2156 mg K⁺ L^?1, with mean values of 1010, 632 and 686 mg L^?1, respectively. Soil salinity, measured as soil electrical conductivity (EC), remained between 0.17 and 0.38 mS cm^?1 at a depth between 0 and 90 cm. An average annual precipitation of 1000 mm provided sufficient leaching of saline ions, loaded by irrigation with landfill leachate, from the soil of the landfill cover and thus prevented possible salinity shocks to the planted willows.     

An Experiment in Participative Environmental Decision Making

Summary The paper presents a method of participatory decision-making involving the authorities at local level, experts and the public. It studies how to solve the problems caused by the heterogeneity of the parties taking part in the decision-making process. The method builds on mutual learning and consideration among the participants following a systematic approach led by a moderator. The method was tested at a workshop simulating a real-life situation. The test case studied at the workshop was the problem of identifying the best site for a low and intermediate level radioactive waste repository among three alternatives. The learning phase was the Krško Nuclear Power Plant cooling problem. The results show that the participants were able to reach agreement on the prioritisation of the alternatives and to end up with suprisingly complex and fully reasonable decision models. We believe that this was achieved particularly due to the well defined procedure that guided the decision-making process, and the ability of all participants to see the influence of their views on the decision model.     

Anaerobic Biodegradation of Blends Based on Polyvinyl Alcohol

The presented work deals with blends composed of polyvinyl alcohol (PVA) and biopolymers (protein hydrolysate, starch, lignin). PVA does not belong to biologically inert plastics but its degradation rate (particularly under anaerobic conditions) is low. A potential solution to the issue problem lies in preparation of blends with readily degradable substrates. We studied degradation of blow-molded films made of commercial PVA and mentioned biopolymers in an aqueous anaerobic environment employing inoculation with digested activated sludge from the municipal wastewater treatment plant. Films prepared in the first experimental series were to be used for comparing biodegradation of blends modified with native or plasticized starch; in this case effect of plasticization was not proved. The degree of PVA degradation after modification with native or plasticized starch increases in a striking and practically same manner already at a starch level as low as approximately 5 wt.%. Films of the second experimental series were prepared as additionally modified with protein hydrolysate and lignin. Only lignin-modified samples exhibited a somewhat lower degree of biodegradation but regarding the measure of lignin present in blend this circumstance is not essential. Level of biodegradation with all discussed films differed only slightly—within range of experimental error.     

An optimization model for the economic control of reservoir eutrophication

An interdesciplinary attempt to formalize and numerically solve problems of the management of reservoir eutrophication is presented. A dynamic ecosystem model is treated by means of a generalized penalty optimization technique to calculate the combination of control actions that minimize cost under the condition that given water-quality indices are preserved.     

Sulfur Metabolism in Polluted Sphagnum Peat Bogs: A Combined 34S–35S–210Pb Study

The size and isotopic behavior of sulfur pools in²¹⁰Pb-dated peat cores were investigated to obtain aninsight into retention mechanisms of pollutant S in twomountain-top peatlands of the Northern Czech Republic, CentralEurope. The bogs were situated 40 km apart in an area whichbetween the years 1985 and 1995 received as much as 130 kg Sha^-1 yr^-1 from the atmosphere. Vertical peataccretion was faster at Pod Jelení horou (JH) than atVelký moál (VM). Organic carbon-bonded S was themost abundant sulfur pool, constituting 77 and 65 wt. % at JHand VM, respectively. At JH both the S concentration maximumand the highest annual S deposition rate were displaceddownward by more than 20 years (from 1987 to the 1960s)indicating that the buried S is vertically mobile. At VM the Sconcentration was the highest in the topmost 2-cm section eventhough atmospheric S deposition peaked in 1987. Differentmechanisms of S isotope redistribution prevailed in thetopmost peat layers at JH, where a negative ³⁴Sshift occurred, and at VM, where a positive ³⁴Sshift occurred. Bacterial sulfate reduction was responsiblefor the negative ³⁴S shift at JH. One possibleexplanation of the positive ³⁴S shift at VM isrelease of ³²S-enriched products of mineralization duringpeat diagenesis. There was a strong positive correlationbetween the abundance of total and pyrite S along the profiles.The presence of pyrite S at VM (526 ± 60 ppm) suggestedthat even at VM bacterial sulfate reduction occurred. Ananaerobic incubation of JH peat indicated sulfate reductionrate of 600 nmol g^-1 day^-1. The turnover times forinorganic S pools were shorter than for the organic S pools.Cumulative S contents in the Czech peat bogs were found to besignificantly lower than in similar sites in the NortheasternU.S., even though the atmospheric S inputs were more thanthree times higher at the Czech sites. Possible causes of suchdiscrepancy are discussed.     

University ranking using research,educational and environmental indicators

This paper introduces a model, which is enabling a comparison between universities regarding research, educational and environmental performances; the mission of university fits the sustainability idea. The purpose of the paper is to improve the methodology and indicators of the existing ranking tables. The three dimensional index, which provides simplified information about the quality of universities, has been developed. It enables quick detection of the weaknesses, strengths and opportunities for universities. Weights of indicators were determined using the analytic hierarchy process (AHP). Results of the AHP have shown that the most important are research oriented indicators, followed by social and environmental ones.The proposed model has been tested on a sample of 35 top universities from the ARWU (Academic Ranking of World Universities) and Times ranking tables and a new ranking table – the Three dimensional University Ranking (TUR) has been developed. In addition, correlations between indicators and ranking tables have been carried out. There is only a medium correlation between the ARWU and TUR. Regarding the indicators, a high correlation with Hirsch indices and Highly Cited Researchers exists, while there is an insignificant correlation between the low student to staff ratio and the graduation rate.