Study of ultrasonic assisted cryogenically cooled EDM process using sintered (Cu–TiC) tooltip

In most EDM operations, the maximum contribution in the total operation cost is the tool cost. Electrode wear is a major problem in EDM process. Therefore, in this paper, the process performance of sintered copper (Cu)–titanium carbide (TiC) electrode tip in ultrasonic assisted cryogenically cooled electrical discharge machining (UACEDM) has been studied. The performance parameters studied in this paper are electrode wear ratio (EWR), material removal rate (MRR), surface roughness (SR), out of roundness and surface integrity. The process parameters considered in this study are discharge current, pulse on time, duty cycle and gap voltage. Cermet was fabricated, having copper content of 75% and titanium carbide content of 25%, by mixing, pressing, and sintering. The performance of the newly formed cermet electrode tip is compared with conventional copper electrode tip for UACEDM process and analyzed. It has been observed that EWR and out of roundness decreases when cermet electrode tip is used as compared to conventional tooltip. It has also been observed that MRR and SR increase when cermet tooltip is used. The surface cracks density and crack width on workpiece machined by cermet tooltip have been found to be lesser as compared to the specimen machined by conventional tooltip.     

Size distribution and source identification of total suspended particulate matter and associated heavy metals in the urban atmosphere of Delhi

A study of the atmospheric particulate size distribution of total suspended particulate matter (TSPM) and associated heavy metal concentrations has been carried out for the city of Delhi. Urban particles were collected using a five-stage impactor at six sites in three different seasons, viz. winter, summer and monsoon in the year 2001. Five samples from each site in each season were collected. Each sample (filter paper) was extracted with a mixture of nitric acid, hydrochloric acid and hydrofluoric acid. The acid solutions of the samples were analysed in five-particle fractions by atomic absorption spectrometry (AAS). The impactor stage fractionation of particles shows that a major portion of TSPM concentration is in the form of PM0.7 (i.e. <0.7microm). Similarly, the most of the metal mass viz. Mn, Cr, Cd, Pb, Ni, and Fe are also concentrated in the PM0.7 mode. The only exceptions are size distributions pertaining to Cu and Ca. Though, Cu is more in PM0.7 mode, its presence in size intervals 5.4-1.6microm and 1.6-0.7microm is also significant, whilst in case of Ca there is no definite pattern in its distribution with size of particles. The average PM10.9 (i.e. <10.9microm) concentrations are approximately 90.2%+/-4.5%, 81.4%+/-1.4% and 86.4%+/-9.6% of TSPM for winter, summer and monsoon seasons, respectively. Source apportionment reveals that there are two sources of TSPM and PM10.9, while three and four sources were observed for PM1.6 (i.e. <1.6microm) and PM0.7, respectively. Results of regression analyses show definite correlations between PM10.9 and other fine size fractions, suggesting PM10.9 may adequately act as a surrogate for both PM1.6 and PM0.7, while PM1.6 may adequately act as a surrogate for PM0.7.     

Studies on the protein binding mechanism of p-aninodiphenylamine: A hair dye constituent

p-Aminodiphenylamine (p-ADPA) has got a binding capacity with tissue proteins. Aspartic and glutamic acids are presumably the responsible units in the protein chain involved in this binding with p-ADPA. p-ADPA is changed into a quinone structure after atmospheric oxidation in Krebs-Ringer-Bicarbonate buffer, pH 7.4 in the presence of trace metal ions. This oxidised form of p-ADPA binds with aspartic acid at pH 7.4 and temperature 40° in 2 hrs. The derivative thus formed absorbs at 450 nm instead of 430 nm.     

Free radical biology in neurological manifestations: mechanisms to therapeutics interventions

Environmental Science and Pollution Research - Recent advancements and growing attention about free radicals (ROS) and redox signaling enable the scientific fraternity to consider their involvement...     

Evaluation of environmental impacts of Integrated Industrial Estate��Pantnagar through application of air and water quality indices

Large-scale industrialization, population inflow, and rapid urbanization coupled with unfavorable meteorological conditions often induce significant degradation of urban environment. In order to assess the extent of environmental impacts due to establishment of the Integrated Industrial Estate??Pantnagar (IIE-Pantnagar), ambient air and groundwater were monitored from June 2007 to May 2008. Collected baseline information was normalized and interpreted with the application of air (AQI) and water quality indices (WQI). Among the pre-identified air pollutants, suspended particulate matter was found to be the principal culprit to deteriorate ambient air quality, with a maximum annual concentration of 418.5 ??g/m³. Monthly average concentrations of respirable particulate matter (aerodynamic diameter < 10 ??m) also persist at a critical level with an annual maximum of 207.3 ??g/m³. A segmented linear function with maximum operator concept was used to compute AQI, and the developed index was found well suitable to demonstrate temporal variations of ambient air quality. The computed AQI value for the selected study region varied from moderate (97.0) to very poor pollution level (309.2) in respect to developed air quality standards. Furthermore, an integrated WQI was developed comprising 9 parameters, and among all the 10 pre-identified locations, the average groundwater quality was found acceptable in terms of Indian drinking water standards. The maximum WQI (70.6) was found at the Kichha Railway Station during summer months, revealing moderate pollution load. Industrial discharge from IIE-Pantnagar coupled with other industrial setup may hold responsible for such kind of degradation of water quality. In contrast, WQI computed at Rudrapur City demonstrate minimum (15.0?C22.1) pollution load. For 95% of the monitoring period, the computed WQI was found acceptable for all selected locations with few exceptions. The application of WQI to assess temporal variations in groundwater quality was therefore found satisfactory.     

Single and multiple daily dose toxicokinetics of fluoride after oral administration of sodium fluoride along with aluminum sulfate in goats

Our previous study suggested that toxicokinetic parameters of fluoride were significantly changed on the 30th day as compared with 1st day, after repeated oral administration of sodium fluoride alone for 30 days in goats. The purpose of this study was to investigate whether aluminum sulfate has ameliorative effect on the toxicokinetics of fluoride. For this, sodium fluoride (20 mg kg^?1 b. wt.) along with aluminum sulfate (150 mg kg^?1 b. wt.) was administered in goats for 30 days to investigate its effect on toxicokinetics of fluoride on days 1 and 30. The fluoride levels against time were adequately described by one compartment open model. The peak plasma level of fluoride was observed at 2 h. The toxicokinetics data revealed a nonsignificant decrease in β (elimination rate constant) and C _max (the maximum plasma concentration) and increase in t _1/2 K _a (absorption half-lives), t _1/2 β (elimination half-lives), area under the plasma (AUC) concentration versus time curve and mean residence time (MRT) was observed for the last dose from their respective first dose values. On the basis of changes in the toxicokinetic parameters, it was concluded that repeated oral administration has cumulative effect on plasma fluoride level and concurrent oral administration of aluminum sulfate has ameliorative action on the toxicokinetics of fluoride in goats.     

Differential effects of UV-B radiation fluence rates on growth,photosynthesis, and phosphate metabolism in two cyanobacteria under copper toxicity

This work was undertaken to ascertain the impact of different fluence rates of ultraviolet-B (UV-B) radiation on two cyanobacterial biofertilizers, Phormidium foveolarum and Nostoc muscorum, growing under copper toxicity. Copper (2 and 5?µmol?L^?1) and high UV-B fluence rate (UV-B_H; 1.0?µmol?m^?2?s^?1) decreased the growth, pigment content, photosynthetic oxygen yield, phosphate uptake, and acid phosphatase activity in both the strains analyzed after 24 and 72?h of experiments, and combined exposure further enhanced the toxic effects. Respiration and alkaline phosphatase activities were stimulated appreciably. The damaging effect was shown on the order on pigments: phycocyanin?>?chlorophyll a?>?carotenoids, and on photosystems: whole chain photosynthetic reaction?>?photosystem II?>?photosystem I. Partial recovery in the photosystem II activity in the presence of artificial electron donors; diphenyl carbazide (DPC), hydroxylamine (NH₂OH), and manganese chloride (MnCl₂) pointed out the interruption of electron flow on the oxidation side of photosystem II. Unlike UV-B_H, low UV-B fluence rate (UV-B_L; 0.1?µmol?m^?2?s^?1), rather than causing damaging effect partially, alleviated the toxic effects of Cu. This study suggests that the cyanobacterium P. foveolarum is less sensitive against UV-B_H and excess Cu (2 and 5?µmol?L^?1), thus P. foveolarum may be used as a biofertilizer for sustainable agriculture.     

Efficient arsenic depollution in water using modified maize powder

This article reports the synthesis of an efficient, low-cost material from maize powder to depollute arsenic-contaminated water. Arsenic is toxic for humans and other organisms even at low concentrations. The most well-known and severe case of arsenic poisoning through drinking water has been found in India and Bangladesh. Numerous inorganic materials have been tested for the removal of arsenic from water bodies over the last two decades. However, all such materials have several disadvantages such as unpredictable arsenic ion removal, high cost and the generation of toxic sludge that is often more difficult to manage. Alternatively, organic material from agricultural waste may be modified to enrich functional groups responsible for As sorption and, in turn, used to depollute contaminated waters. Here, Zea mays cob powder has been modified to remove arsenic species from water. Two modified materials were produced: an aminated maize powder and a thiolated maize powder. Amination was done using epichlorohydrin and dimethylamine. Thiolation was done using thioglycolic acids. Amination increased As (III) sorption from 70 to 75.8 % and As (V) sorption from 85 to 94.42 %, compared with unmodified maize powder. Thiolation increased As (III) sorption from 70 to 81.7 % and As (V) sorption from 85 to 90 %. Amination increased usability cycles from 3 to 5. Thiolation increased usability cycles from 3 to 6. The novel modified maize biosorbent has enough potential for the development of a low-cost technological pre-treatment step, prior to high-tech chemical treatments.     

A performance-based tabular approach for joint systematic improvement of risk control and resilience applied to telecommunication grid,gas network,and ultrasound localization system

Environment Systems and Decisions - Organizational and technical approaches have proven successful in increasing the performance and preventing risks at socio-technical systems at all scales....     

A Visual Basic simulation software tool for performance analysis of a membrane-based advanced water treatment plant

A Visual Basic simulation software (WATTPPA) has been developed to analyse the performance of an advanced wastewater treatment plant. This user-friendly and menu-driven software is based on the dynamic mathematical model for an industrial wastewater treatment scheme that integrates chemical, biological and membrane-based unit operations. The software-predicted results corroborate very well with the experimental findings as indicated in the overall correlation coefficient of the order of 0.99. The software permits pre-analysis and manipulation of input data, helps in optimization and exhibits performance of an integrated plant visually on a graphical platform. It allows quick performance analysis of the whole system as well as the individual units. The software first of its kind in its domain and in the well-known Microsoft Excel environment is likely to be very useful in successful design, optimization and operation of an advanced hybrid treatment plant for hazardous wastewater.