Assessment of aliphatic-aromatic copolyester biodegradable mulch films. Part II: laboratory simulated conditions

In a previous paper, we demonstrated that the main mechanism of degradation of poly(butylene adipate-co-terephthalate) (PBAT) biodegradable mulch films when exposed to field conditions was crosslinking due to the photodegradation from solar radiation. The aim of this work was to determine the effect of crosslinking on the biodegradability of PBAT samples. PBAT films were subjected to UV photodegradation in laboratory simulated conditions to investigate the effects of crosslinking and other major changes in the structure and mechanical properties of the films. Crosslinking caused the films to become more brittle and produced a reduction of the tensile strength and percent elongation. Besides the crosslinking degradation mechanism, chain scission also occurred in the samples. After 45d of biodegradation test, the non-crosslinked PBAT sample reached 60% of mineralization. However, the percent mineralization was reduced when samples were crosslinked. The percent mineralization of samples with 10%, 30%, 50%, and 70% gel content was 36%, 43%, 21%, and 24%, respectively. Our results indicate that crosslinking is a key process underlying the degradation of the PBAT film and did affect the biodegradability of the films, since the samples with greater amount of gel content generally showed less percent mineralization in the biodegradation tests.     

Light-induced transformations of aza-aromatic pollutants adsorbed on models of atmospheric particulate matter: Acridine and 9(10-H) acridone

The effect of the characteristics of the surface on the phototransformation of acridine, one of the most abundant azapolycyclic compounds encountered in urban atmospheres, and of one of its principal photoproducts, acridone, was studied when adsorbed onto models of the atmospherice particulate matter. For this purpose, relative photodegradation rates were determined from absorption or emission intensities as a function of irradiation times, and some products were isolated and characterized. The relative photodegradation rates of adsorbed acridine show the tendency (NH(4))(2) SO(4) > MgO > Al(2)O(3) >SiO(2). In general, the rates decrease as the fraction of protonated acridine species on the surface increases in MgO, Al(2)O(3), and SiO(2), except for (NH(4))(2) SO(4) where a fast surface reaction occurs. Oxygen reduces the photodestruction rates by as much as 40 to 60% when compared to an inert atmosphere, implying the participation of an acrideine triplet state in the transformation processes on all surfaces except on (NH(4))(2)SO(4). Acridone, a major product, undergoes a photoinduced tautomerization to 9-hydroxy acridine. The formation of a dihydrodiol, another photoproduct of acridine, is suggested by comparison to reported spectral properties of these compounds. This is formed through a singlet oxygen reaction. Photoproducts showing the absence of the narrow absorption band of 250 nm, characteristic of the pi -->pi* transition in tricyclic aromatics, were detected in small yields but not identified. These results suggest possible photochemical transformation pathways that could lead to the ultimate fate of these pollutants in the environment.     

Study of spatial and temporal distribution of antimicrobial in water and sediments from caging fish farms by on-line SPE-LC-MS/MS

An on-line solid phase extraction liquid chromatography-tandem mass spectrometry (SPE-LC-MS/MS) method for the determination of 12 antimicrobials in sediment and surface water was developed and validated. Furthermore, the spatial and temporal antimicrobials distributions in the sediment and in the water of four fish farms located in the hydroelectric dam of Ilha Solteira Reservoir in Brazil were investigated over four seasons in three sampling sites: at the fish cages, 100 and 1,000 m downstream far from the cages. The method was performed using an Agilent Zorbax 80 SB-C8 column (9.4 × 15 mm, 5 µm) as the loading column, and the Agilent Zorbax Eclipse Plus C18 column (3.0 × 100 mm, 3.5 µm) as a separation column within a run time of 13 min. The limits of quantification were less than 9 ng·L^?1 for the antibiotics in water and 16 µg·kg^?1 in sediment; the recovery ranged from 80 to 119%, with a variation coefficient less than 11%, and the repeatability was lower than 15%. Oxytetracycline was found in the water in all sample seasons. However, florfenicol was identified in April and October 2013 and January 2014, and tetracycline was present in July 2013. Regarding the sediment, oxytetracycline and tetracycline were found in all sampling periods, but chlortetracycline was only identified in January 2014. The spatial distribution of antimicrobials showed that the main pollution source came from the fish farms. This study demonstrated that the proposed method is reliable for the monitoring of antimicrobials in water and sediments and it showed contamination in both matrices from Ilha Solteira Reservoir.     

Thermal decomposition of electronic wastes: mobile phone case and other parts

Pyrolysis and combustion runs at 850°C in a horizontal laboratory furnace were carried out on different parts of a mobile phone (printed circuit board, mobile case and a mixture of both materials). The analyses of the carbon oxides, light hydrocarbons, polycyclic aromatic hydrocarbons (PAHs), polychlorodibenzo-p-dioxin, polychlorodibenzofurans (PCDD/Fs), and dioxin-like PCBs are shown. Regarding semivolatile compounds, phenol, styrene, and its derivatives had the highest yields. In nearly all the runs the same PAHs were identified, naphthalene being the most common component obtained. Combustion of the printed circuit board produced the highest emission factor of PCDD/Fs, possibly due to the high copper content.     

Monitoring of heavy metal concentrations in home outdoor air using moss bags

One monitoring station is insufficient to characterize the high spatial variation of traffic-related heavy metals within cities. We tested moss bags (Hylocomium splendens), deployed in a dense network, for the monitoring of metals in outdoor air and characterized metals’ long-term spatial distribution and its determinants in Girona, Spain. Mosses were exposed outside 23 homes for two months; NO₂ was monitored for comparison. Metals were not highly correlated with NO₂ and showed higher spatial variation than NO₂. Regression models explained 61-85% of Cu, Cr, Mo, Pb, Sb, Sn, and Zn and 72% of NO₂ variability. Metals were strongly associated with the number of bus lines in the nearest street. Heavy metals are an alternative traffic-marker to NO₂ given their toxicological relevance, stronger association with local traffic and higher spatial variability. Monitoring heavy metals with mosses is appealing, particularly for long-term exposure assessment, as mosses can remain on site many months without maintenance.     

Long-term effects of lead poisoning on bone mineralization in vultures exposed to ammunition sources

Long-lived species are particularly susceptible to bioaccumulation of lead in bone tissues. In this paper we gain insights into the sublethal effects of lead contamination on Egyptian vultures (Neophron percnopterus). Our approach was done on the comparison of two populations (Canary Islands and Iberian Peninsula) differing in exposures to the ingestion of lead ammunition. Blood lead levels were higher in the island population (Canary Islands range: 5.10-1780 μg L⁻¹n = 137; Iberian Peninsula range: 5.60-217.30 μg L⁻¹n = 32) showing clear seasonal trends, peaking during the hunting season. Moreover, males were more susceptible to lead accumulation than females. Bone lead concentration increased with age, reflecting a bioaccumulation effect. The bone composition was significatively altered by this contaminant: the mineralization degree decreased as lead concentration levels increased. These results demonstrate the existence of long-term effects of lead poisoning, which may be of importance in the declines of threatened populations of long-lived species exposed to this contaminant.