Decomposition of paper wastes in presence of ceramics and cement raw material

Paper recycling is an environmental important activity that is carried out in all the countries, but during the recycling process a paper waste is produced. Generally these wastes are placed in landfill sites but it is possible to profit it as secondary fuel and raw material in manufacture furnaces.

In this work the combustion of the waste papers with cement and ceramic raw material has been studied with the objective to analyse the interaction of these substances with the emitted pollutants like PAHs and PCDD/Fs.

The results of the study show that the presence of inorganic material produces an increment in the lighter PAH emission but chlorinated compounds are not affected. The PCDD/F emission level found in the combustion of this waste is quite low compared with other wastes subjected to similar conditions.     

不同碳源条件下草菇内切型纤维素酶基因（eg1）转录表达的分析

利用Northernblot方法分析了不同碳源条件下草菇切型纤维素酶基因(eg1)的表达.结果发现,在含有纤维素的液体培养基中生长10d,eg1在草菇菌丝中有高效表达;纤维二糖、α-乳糖、β-乳糖,也能诱导eg1的表达,但和纤维素相比,eg1的表达量相对较低,并且它们的诱导效应在加入这类糖12h后迅速减弱;槐糖和龙胆二糖的诱导作用非常弱.在天然稻草为基质的固体栽培料生长时,草菇eg1的表达和草菇菌丝生长与出菇相对应,在菌丝生长期(d8)可见eg1的表达,d12时菌丝已长满,表达减弱,在出菇及菇体的分化及增大期,eg1的表达量逐渐增强,在成熟期达到最高水平;表明在草菇菇体发育中需要更多碳源及能源的补充,eg1在这方面起着非常重要的作用.图4参14     

Initial studies for the phytostabilization of a mine tailing from the Cartagena-La Union Mining District (SE Spain)

Mine tailings are one of the main environmental problems in post-mining landscapes and their removal is often complicated due to their high heavy metal content and dimensions. In this sense, using plant species for in situ stabilization may be an interesting and low cost option. Moreover, there are some plant species that have adapted to these conditions and are usually present at these contaminated sites. In this study, a mine tailing located in South-East Spain was investigated in order to establish lines for further phytostabilization research. A plot sampling design was carried out in order to characterize the soil properties. In addition, two plant species that have naturally colonized some parts of the tailing, Hyparrhenia hirta and Zygophyllum fabago, were sampled, including the analyses of their respective rhizospheric soils. The results of plot soil samples showed pH values from ultra acid to slightly alkaline. The electrical conductivity values were around 4dSm(-1) in plots with vegetation and 8dS m(-1) in the plot without vegetation. Total metal concentrations were high (4000 mg kg(-1) for Pb, 9000-15000 mg kg(-1) for Zn). DTPA- and water-extractable Zn were 5% and 3% of the total, respectively. H. hirta accumulated around 150 mg kg(-1) Pb in both shoots and roots. Zn concentration was 750 mg kg(-1) in Z. fabago shoots. DTPA-extractable Zn and Cu were positively correlated to plant uptake.     

Thermogravimetric kinetic analysis and pollutant evolution during the pyrolysis and combustion of mobile phone case

The increase in electronic waste, including cellular telephones, worldwide is a worrying reality. For this reason, urgent action on the management of these wastes is necessary within a framework that respects the environment and human health. Mobile phone components can be physically segregated through grinding at the dismantling sites, in order to reuse or reprocess (via chemical or physical recycling) the recovered plastics and valuable metals. A kinetic study of the thermal decomposition of a mobile phone case has been carried out under different conditions by thermogravimetry. Several experiments were performed in a nitrogen atmosphere (pyrolysis runs) and also in an oxidative atmosphere with two different oxygen concentrations (10% and 20% oxygen in nitrogen). Dynamic runs and dynamic+isothermal runs have been carried out to obtain much decomposition data under different operating conditions. Moreover some TG-MS runs were performed in order to better understand the thermal decomposition of a mobile phone case and identify some compounds emitted during the controlled heating of this material. A scheme of two independent reactions for pseudocomponents has been proposed for the pyrolysis process. For the combustion runs, the scheme proposed includes two pyrolytic reactions competing with other two reactions with formation of an intermediate residue, and finally the reaction of oxidation/burning of the intermediate residue. Furthermore, pyrolysis and combustion runs at 500 °C in a horizontal laboratory furnace were carried out. More than 50 compounds, including carbon oxides, light hydrocarbons, and polycyclic aromatic hydrocarbons (PAHs) have been identified and quantified. The main semivolatile compounds detected were phenol and styrene. Furthermore, polychlorodibenzo-p-dioxin and polychlorodibenzofurans (PCDD/Fs) and dioxin-like PCBs produced were analyzed. In the combustion run, PCDDs were obtained in higher amounts than PCDFs and HxCDD was the most emitted homologue.     

Thermal decomposition of electronic wastes: mobile phone case and other parts

Pyrolysis and combustion runs at 850°C in a horizontal laboratory furnace were carried out on different parts of a mobile phone (printed circuit board, mobile case and a mixture of both materials). The analyses of the carbon oxides, light hydrocarbons, polycyclic aromatic hydrocarbons (PAHs), polychlorodibenzo-p-dioxin, polychlorodibenzofurans (PCDD/Fs), and dioxin-like PCBs are shown. Regarding semivolatile compounds, phenol, styrene, and its derivatives had the highest yields. In nearly all the runs the same PAHs were identified, naphthalene being the most common component obtained. Combustion of the printed circuit board produced the highest emission factor of PCDD/Fs, possibly due to the high copper content.     

Phytomanagement of strongly acidic,saline eutrophic wetlands polluted by mine wastes: The influence of liming and Sarcocornia fruticosa on metals mobility

The aim of this study was to assess the effectiveness of combining liming and vegetation for the phytomanagement of strongly acidic, saline eutrophic wetlands polluted by mine wastes. Simulated soil profiles were constructed and four treatments were assayed: without liming + without plant, without liming + with plant, with liming + without plant and with liming + with plant. The plant species was the halophyte Sarcocornia fruticosa. Three horizons were differentiated: A (never under water), C1 (alternating flooding–drying conditions) and C2 (always under water). The soluble Cd, Cu, Mn, Pb and Zn concentrations were measured regularly for 18 weeks and a sequential extraction procedure was applied at the end of the experiment. Liming was effective (between ～70% and ～100%) in reducing the soluble Zn, Cu and Pb. In contrast, soluble Mn and Cd increased with liming, especially in the treatment with liming + with plant, where the concentrations were 2-fold higher than in the non-limed treatments. The amendment increased the contents of Zn, Mn and Cd bound to potentially-mobilisable soil fractions at the expense of the most-environmentally-inert fractions. Hence, the combined use of liming and vegetation may increase the long-term environmental risk of metals solubilisation.     

Growth of Lygeum spartum in acid mine tailings: response of plants developed from seedlings, rhizomes and at field conditions

Lygeum spartum is a native species in semiarid Mediterranean areas that grows spontaneously on acid mine tailings. We aimed to study the suitability of this plant for phytostabilization. L. spartum was grown from both seeds and rhizomes in acid mine tailings with various fertilizer and lime treatments. Untreated soils had a solution pH of 2.9 with high concentrations of dissolved salts (Electrical Conductivity 25 dS m(-1)) and Zn (3100 mg L(-1)). Plants grown on untreated soil had high shoot metal concentrations (>4000 mg kg(-1)Zn). Liming increased the solution pH to 5.5 and reduced the dissolved salts by more than 75%, resulting in lower shoot metal accumulation. Plants grown from rhizomes accumulated less metal than those grown from seeds. Plants collected in the field had metal concentrations an order of magnitude less than plants raised in the growth chamber. These differences may be due to the higher moisture content and homogeneous nature of the soils used in the pot experiment.     

Root responses to soil Ni heterogeneity in a hyperaccumulator and a non-accumulator species

We compared root responses of the Ni-hyperaccumulator plant Berkheya coddii Rossler with the non-accumulator plant Cicer arietinum L. to Ni heterogeneity in soil. We grew plants in growth containers filled with control soil, homogeneously spiked, and heterogeneously spiked soil with Ni concentrations of 62 and 125 mg kg^?1. Neutron radiography (NR) was used to observe the root distribution and the obtained images were analysed to reveal the root volumes in the spiked and unspiked segments of the growth container. There was no significant difference in root distribution pattern of B. coddii among different concentrations of Ni. Unlike B. coddii, the roots of C. arietinum initially grew into the spiked segments. However, the later developing roots did not penetrate the spiked segment suggesting an avoidance strategy. Our results indicate that, B. coddii does not forage towards the Ni-rich patches, although presence of Ni in soil changes its root morphology.     

Interaction between pollutants produced in sewage sludge combustion and cement raw material

Nowadays the use of waste as secondary fuel in clinker kilns is an extensive practice, but the interaction between cement raw material (CRM) and the combustion gases of the fuels has not been extensively studied. Because of that, in this work the effect of the interaction of exhaust from the combustion of sewage sludge and CRM has been studied in a laboratory furnace. The experiments were performed at 300 degrees C, close to the temperature at the cyclones in a cement industry. The behavior of volatile compounds, polycyclic aromatic compounds (PAH) and polychloro dibenzo-p-dioxin and polychloro dibenzofurans (PCCD/F) were analysed in the presence or absence of CRM. The results obtained show that the presence of CRM at the outlet of the combustion gases is beneficial for the decrease of pollutant emissions.