Temporal scale-induced uncertainty in load duration curves for instream-dissolved oxygen

Load duration curves were developed using the Hydrological Simulation Program FORTRAN (HSPF) for dissolved oxygen (DO) for the Amite River in Louisiana, USA. The concept of ‘dissolved oxygen reserve’, defined as the total quantity of DO, is introduced. The effect of temporal resolution on duration curves of DO reserve was examined using duration curves developed based on daily, weekly, biweekly, and monthly average data. Duration curves for DO exhibited high variability in the load estimated using daily data as compared to those based on biweekly and monthly data. A seasonal analysis revealed the trend in the DO reserve. The daily DO reserve for the Amite River at Port Vincent was 44,049.31 kg when daily summer data were used and 74,255.15 kg for daily annual data. A surplus of 10,691 kg of DO reserve was shown in the monthly data during critical summer months. The coefficient of variation (CV), used to define the temporal scale-induced uncertainty, was found to be linearly and inversely correlated with the logarithm of the time scale. Regression equations were developed to extrapolate near real-time flow and water quality data, greatly simplifying flow and water quality monitoring and reducing the cost involved in flow and water quality monitoring.     

Disinfection of an advanced primary effluent with peracetic acid and ultraviolet combined treatment: a continuous-flow pilot plant study

Disinfection of an advanced primary effluent using a continuous-flow combined peracetic acid/ultraviolet (PAA/UV) radiation system was evaluated. The purpose was to determine whether the maximum microbial content, established under Mexican standards for treated wastewaters meant for reuse--less than 240 most probable number fecal coliforms (FC)/100 mL--could be feasibly accomplished using either disinfectant individually, or the combined PAA/UV system. This meant achieving reduction of up to 5 logs, considering initial concentrations of 6.4 x 10(+6) to 5.8 x 10(+7) colony forming units/100 mL. During the tests performed under these experiments, total coliforms (TC) were counted because FC, at the most, will be equal to TC. Peracetic acid disinfection achieved less than 1.5 logs TC reduction when the C(t) x t product was less than 2.26 mg x minimum (min)/L; 3.8 logs for C(t) x t 4.40 mg x min/L; and 5.9 logs for C(t) x t 24.2 mg x min/L. In continuous-flow UV irradiation tests, at a low-operating flow (21 L/min; conditions which produced an average UV fluence of 13.0 mJ/cm2), the highest TC reduction was close to 2.5 logs. The only condition that produced a disinfection efficiency of approximately 5 logs, when both disinfection agents were used together, was the combined process dosing 30 mg PAA/L at a pilot plant flow of 21 L/min and contact time of 10 minutes to attain an average C(t) x t product of 24.2 mg x min/L and an average UV fluence of 13 mJ/cm2. There was no conclusive evidence of a synergistic effect when both disinfectants were employed in combination as compared to the individual effects achieved when used separately, but this does not take into account the nonlinearity (tailing-off) of the dose-response curve.     

Informative Report

Abstract

Chemical composition and particle size data for particulate emissions from stationary sources are required for environmental health effect assessments, air chemistry studies and for air quality modeling investigations such as source apportionment. The Information presented In this paper is directed to those individuals concerned with these environmental Investigations. In this study, particulate emissions from a group of non-ferrous smelters have been physically and chemically characterized. Emission samples were collected at the baghouse outlets from smelter furnaces and at smelter acid plant stacks at three locations; a zinc, a lead, and a copper smelter.

Mass emission rate determinations were made by EPA reference methods. Cascade impactors were used to collect in-stack samples for particle size distribution measurements. Particulate samples for chemical characterization were collected on membrane filters for analysis by X-ray fluorescence spectroscopy. Development of measurement techniques required to determine the elemental composition of the total mass and sized fractions of the emission are discussed. Results of the tests at the three smelters include total mass and elemental emission rates, particle size distribution, and the elemental composition of the total particulate mass and of sized fractions from both the smelter furnaces and acid plants. The results obtained at the copper smelter may not be representative of the emissions at the many copper smelters where reverbatory furnaces have been replaced.     

Performance of Exhaust Control Devices on 1966 Model Passenger Cars

Road tests have been carried out in five different cities with a fleet of 300 passenger cars consisting of three different makes, half of which are equipped with the 1966 exhaust control devices required by the state of California. The performance of these devices during the first series of tests has been evaluated. All three makes of device-equipped cars produced significantly lower emissions of hydrocarbons and carbon monoxide than did similar cars tested in 1962 and 1963. There were no consistent differences among the three makes of cars with respect to carbon monoxide and hydrocarbon emissions.     

Silver Valley Lead Study: Further Analysis of the Relationship between Blood Lead and Air Lead

Blood lead and air lead levels of children who lived within 32 km of a smelter in Kellogg, ID were measured in 1974 and 1975. While an analysis of the 1974 survey has appeared, the results of the 1975 survey and an evaluation of the change in blood lead levels of those children who participated in both the 1974 and 1975 surveys has not previously been discussed in the literature. It Is concluded that, for these data, in the air lead range of 0.5–5 μg/m³, the blood lead-air lead relationship can be adequately described by blood lead-air lead slope which is approximately 1.0 and at most 1.4. This slope was also found to be Independent of children’s age. It Is shown that an accurate estimate of the blood lead-air lead relationship cannot be obtained without taking proper account of selected environmental variables; specifically, pica, sex, age, father’s work status, education, and home cleanliness.     

Fly Ash from Electrostatic Precipitators: Characterization of Large Spheres

The body of information contained in this paper is directed towards individuals concerned with the toxicology and physical state of airborne effluents from pulverized coal-fired stationary sources. A flotation/sedimentation technique was used to separate fly ash from power plant clean-up devices into light, medium, and high density fractions. Large spherical particles were selected from each fraction and examined by optical and scanning electron microscopy. Attempts were made to identify pleurospheres (filled hollow spheres) by crushing the spheres in situ under the optical microscope. In no cases were filled spheres observed, suggesting that they are not a common structure in fly ash. Several phenomena which generate hollow spheres are discussed.     

Relationships between Aerosol Extinction Coefficients Derived from Airport Visual Range Observations and Alternative Measures of Airborne Particle Mass

Epidemiological assessments of population exposures to airborne particles are often hampered by the scarcity of available fine particle mass measurements. In an attempt to overcome this serious problem, we analyze In this paper methods for predicting fine particle (M ₁) and Inhalable particle (IP) mass concentrations using relative humidity corrected light extinction coefficient (b _ext) estimated from airport visual range (V _r) observations. The analyses presented are based on theoretical determinations as well as statistical investigations utilizing EPA's NASN and Inhalable Particle Monitoring Network (IPMN) data bases and routine airport visual range observations In twelve large U.S. cities. Our results Indicate that, after controlling for certain limitations of airport visual range data, most of the regression models developed in this paper can be applied satisfactorily to predict M _t and IP. Furthermore, our findings Indicate that a more representative formula than the commonly used meteorological range formula to predict atmospheric b _ext values in urban areas may be b _ext = (1.8 ± 0.04)/V _r. Because of known local or regional influences, however, we do suggest calibration of any predictive model which utilizes airport visibility data against site-specific aerometric data on particle mass concentrations or scattering coefficient measurements.     

Performance Evaluation of Integral and Analytical Plume Rise Algorithms

The purpose of this study was to evaluate the performance of current regulatory algorithms for predicting plume rise for refinerytype sources (short stacks and a wide range of source conditions) and the performance of new or alternate algorithms which may provide better estimates. To meet the objectives, five plume rise algorithms were statistically evaluated against ten field and laboratory plume rise data bases. Two forms of the Briggs plume rise equations were tested because they are almost exclusively used in current EPA regulatory models. Two modified Briggs equations were tested to assess how simple modifications can Improve the accuracy of the estimates. The fifth algorithm was a numerical solution to the basic equations for conservation of mass, momentum, and energy often referred to as an Integral plume rise algorithm. This algorithm was selected because It handles the wide range of source and atmospheric boundary-layer conditions that affect trajectories of plumes from refinery stacks.

Ten independent plume rise data bases were assembled that covered a wide range of source and meteorological conditions. From the data bases, a total of 107 different data sets were obtained and each data set included plume rise observations versus downwind distance for one source and meteorological condition. Each model was run for each data set and the root-mean-square and mean error between model and observation was computed for use in statistically evaluating model performance.

The statistical evaluation of the algorithms showed that the rms error (considering all data bases) for the Integral plume rise algorithm was approximately 30 percent less than the errors for all other algorithms tested. This difference was significant at the 95 percent confidence level. The results suggest that improved plume rise estimates in regulatory models applied to refineries and other appropriate sources could be achieved to reduce costs and improve ambient air quality estimates through the use of an integral plume rise algorithm.     

Health Risks of Short-term S02 Exposure to Exercising Asthmatics

A method is described for quantifying health risks to asthmatics briefly exposed to elevated levels of SO₂. By combining symptomologlcal and physiological measurements, we have developed a dose-response surface that relates both severity and incidence of response to ambient air quality levels. The complete model to assess potentially avoidable risks includes power plant emission data; ambient SO₂ background levels; demographic and activity patterns of asthmatics, the identified population at risk; and the dose-response surface. The estimated annual risk to persons experiencing an SO₂-lnduced response due to a nearby power plant is quite small (response rates under 3 percent). Uncertainties due to modeling errors, variations in activity patterns, demographics and physiological response are discussed.     

Soil Remediation Techniques at Uncontrolled Hazardous Waste Sites

The A&WMA Critical Review entitled “Soil Remediation Techniques at Uncontrolled Hazardous Waste Sites” was presented by Ronald C. Sims, Department of Civil and Environmental Engineering, Utah State University, Logan, Utah. Dr. Sims presented his review at the 83rd Air & Waste Management Association Annual Meeting, held in Pittsburgh, Pennsylvania in June 1990. Prepared discussions presented during the Critical Review session are published here, along with some closing remarks by Dr. Sims. Ronald Harkov, Chairman of the Critical Review Subcommittee of the Publications Committee, served as moderator of the 1990 A&WMA Critical Review session.