Influence of moisture content,particle size and forming temperature on productivity and quality of rice straw pellets

A large amount of rice straw is generated and left as much in paddy fields, which causes greenhouse gas emissions as methane. Rice straw can be used as bioenergy. Rice straw pellets are a promising technology because pelletization of rice straw is a form of mass and energy densification, which leads to a product that is easy to handle, transport, store and utilize because of the increase in the bulk density. The operational conditions required to produce high quality rice straw pellets have not been determined. This study determined the optimal moisture content range required to produce rice straw pellets with high yield ratio and high heating value, and also determined the influence of particle size and the forming temperature on the yield ratio and durability of rice straw pellets. The optimal moisture content range was between 13% and 20% under a forming temperature of 60 or 80 °C. The optimal particle size was between 10 and 20 mm, considering the time and energy required for shredding, although the particle size did not significantly affect the yield ratio and durability of the pellets. The optimized conditions provided high quality rice straw pellets with nearly 90% yield ratio, ?12 MJ/kg for the lower heating value, and >95% durability.     

Source-specific sewage pollution detection in urban river waters using pharmaceuticals and personal care products as molecular indicators

Environmental Science and Pollution Research - Source-specific elucidation of domestic sewage pollution caused by various effluent sources in an urban river water, as conducted for this study,...     

Analysis method for PCBs in reclaimed oil using a fast-GC triple stage quadrupole mass spectrometer with the 13-component quantitation method

It is necessary for companies supplying reclaimed oil to analyze polychlorinated biphenyls (PCBs), because there is a possibility of the presence of contaminants due to trace-level PCBs in the reclaimed oil. However, common analysis methods of PCBs are time-consuming and complicated. Fast-GC triple stage quadrupole mass spectrometer with the 13-component quantitation method is an official method for analyzing PCBs in insulating oil in Japan. This method is extremely fast and simplified. The purpose of this study involves an investigation of the aforementioned fast and simple method for potential use in the analysis of reclaimed oil. Furthermore, it was attempted to combine the method with sample preparation involving only hexane dilution. The effect of sample dilutions corresponding to 100, 300, and 500 times was evaluated for reducing the matrix effect. The matrix effect was suppressed at a dilution ratio equal to or exceeding 300 times. Calibration curves of four points, namely 0.01, 0.05, 0.1, and 0.5 ng/mL, (ignored origin) by using an internal standard method were prepared for the 13 components. The square of regression coefficient (R²) values of all calibration curves exceeded 0.997. This method was adopted for the analysis of reclaimed oil containing 0.5 μg/mL PCBs, which corresponds to the judgment criteria, and accurate quantitation (accuracy value, 94.0–102%) and good repeatability (%RSD, 3.6%) were obtained. Furthermore, the required sensitivity was maintained even when 800 samples were analyzed without a cleaning ion source and an exchanging analysis column.     

Female mate preference for a costly ornament in male guppies

Female mate preference for dorsal fin length in male guppies (Poecilia reticulata) was investigated. In a dichotomous choice experiment using live males, females preferred males with longer dorsal fins to those with shorter dorsal fins. When the dorsal fin lengths of the two males were reversed by surgical manipulation, the females reversed their preference. To further examine this preference behaviour, a second dichotomous choice experiment was conducted using digitally modified male images that differed only in dorsal fin lengths. In this next experiment, females preferred male images with a longer dorsal fin than those with a shorter dorsal fin. In order to clarify the cost of possessing a long dorsal fin for males, the effect of dorsal fin length on swimming performance of males was also examined with a flow chamber. Male swimming performance was enhanced by surgically shortening the dorsal fin. The result of this study suggests that the long dorsal fin of male guppies is a costly handicap that may have evolved due to female mate choice.     

Reaction hazards of triethylaluminum under closed conditions

We evaluate the reaction hazards of triethylaluminum (TEA) under closed conditions for safe treatment of aluminum alkyls. The explosive reactions of TEA are difficult to be estimated using thermal analysis because the estimate reactions are too slow under these conditions. The results of our closed vessel tests and chemical equilibrium calculations show that the TEA and water system mixture in closed conditions decomposes into lower-molecular-weight compounds than the products by using well-known hydrolysis of TEA. The present work also demonstrates that large temperature and pressure increases could occur because of the existence of TEA and aluminum hydroxide. Since aluminum hydroxide contains water as alumina hydrates, aluminum hydroxide could have been the source of water at high temperatures and could have contributed to the mixed reaction between TEA and water.     

Diffusion mechanism of chloride ions in sodium montmorillonite

For safety assessment of geological disposal of HLW, it is necessary to understand the diffusion mechanism of radionuclides in compacted bentonite. In this study, the diffusion behavior of chloride ions in compacted montmorillonite was studied from the viewpoints of the activation energy for apparent diffusion and the basal spacing of the compacted montmorillonite. A unique change in the activation energy as a function of the dry density of the montmorillonite was found. The activation energy decreased from 17.4 to 13.5 kJ mol-1 as the dry density increased from 0.7 to 1.0 Mg m-3 and increased to 25.1 kJ mol-1 at dry densities above 1.0 Mg m-3. The basal spacing of 1.88 nm, corresponding to the three-water layer hydrate state, was not observed by X-ray diffraction (XRD) until the dry density increased to 1.0 Mg m-3, where the minimum activation energy was obtained. On the other hand, a basal spacing of 1.56 nm, corresponding to the two-water layer hydrate state, was observed at the dry densities of 1.4 Mg m-3 and above, where the activation energies were more than 22 kJ mol-1. These experimental results suggest that there are at least two additional diffusion processes that can raise or reduce the activation energy and are affected by water in the region adjacent to the montmorillonite surfaces. If the "Grahame model" can be introduced to describe the electrical double layer, surface diffusion will be considered the possible predominant diffusion process, even for anions like chloride ions.     

Experimental and modeling studies on sorption and diffusion of radium in bentonite

The sorption and desorption behavior of radium on bentonite and purified smectite was investigated as a function of pH, ionic strength and liquid to solid ratio by batch experiments. The distribution coefficients (Kd) were in the range of 10(2) to > 10(4) ml g-1 and depended on ionic strength and pH. Most of sorbed Ra was desorbed by 1 M KCl. The results for purified smectite indicated that Ra sorption is dominated by ion exchange at layer sites of smectite, and surface complexation at edge sites may increase Ra sorption at higher pH region. Reaction parameters between Ra and smectite were determined based on an interaction model between smectite and groundwater. The reaction parameters were then used to explain the results of bentonite by considering dissolution and precipitation of minerals and soluble impurities. The dependencies of experimental Kd values on pH, ionic strength and liquid to solid ratio were qualitatively explained by the model. The modeling result for bentonite indicated that sorption of Ra on bentonite is dominated by ion exchange with smectite. The observed pH dependency was caused by changes of Ca concentration arising from dissolution and precipitation of calcite. Diffusion behavior of Ra in bentonite was also investigated as a function of dry density and ionic strength. The apparent diffusion coefficients (Da) obtained in compacted bentonite were in the range of 1.1 x 10(-11) to 2.2 x 10(-12) m2 s-1 and decreased with increasing in dry density and ionic strength. The Kd values obtained by measured effective diffusion coefficient (De) and modeled De were consistent with those by the sorption model in a deviation within one order of magnitude.     

Anthropogenic impacts on water quality of the lagoonal coast of Fongafale Islet, Funafuti Atoll, Tuvalu

Water pollution, evident by negative values of redox potential in waters, occurs at the lagoonal coast located near the densely populated area of Fongafale Islet on Funafuti Atoll, Tuvalu, Central Pacific. Sediment microbial quinone analysis revealed that these coastal sediments exhibit 2.7–10.4 times more microbial biomass, significantly different microbial community structure and low microbial diversity, when compared to an undisturbed natural coastal sediment. Thus, the pollution is chronic. By considering the total land use/coverage on the islet, the situation of septic tank installations, temporal changes in water redox potential and Escherichia coli numbers in the coastal waters and the spatial distribution of acid volatile sulfide in the sediments, we conclude that domestic wastewater is the primary source of pollution. This pollution is proposed to occur via the following mechanism: during ebb tides, domestic wastewater leaking from bottomless septic tanks and pit toilets run off into the lagoonal coast. Tide changes control the pollution load of domestic wastewater.