Nonredundancy in the dispersal network of a generalist tropical forest tree

Plant species with generalized dispersal mutualisms are considered to be robust to local frugivore extinctions because of redundancy between dispersal agents. However, real redundancy can only occur if frugivores have similar foraging and ranging patterns and if fruit is a limiting resource. We evaluated the quantitative and qualitative contributions of seed dispersers for an endochorus mast-fruiting species, Prunus javanica (Rosaceae) in Khao Yai National Park, Thailand, to evaluate the potential redundancy of dispersers. Data were collected from tree watches, seed/fruit traps, and seed transects under and away from fruiting trees, feeding and seed deposition by gibbons (Hylobates lar), and evaluations of seed and first-year seedling survival. We identified three clusters of dispersers within the network. Most (>80%) frugivore species observed were small birds and squirrels that were not functional dispersers, dropping most seeds under or very near the tree crown, where seedling survival was ultimately nil. Monkeys (Macaca leonina) were low-quality, short-range dispersers, but they dispersed large numbers of seeds and were responsible for 67% of surviving first-year seedlings. Gibbons and Oriental Pied Hornbills (Anthracoceros albirostris) handled few fruits, but they provided the highest quality service by carrying most seeds away from the canopy to medium and long distances, respectively. Although there was overlap in the deposition patterns of the functional dispersers, they displayed complementary, rather than redundant, roles in seed dispersal. Satiation of all functional dispersers further limited their capacity to "replace" one another. Redundancy must be evaluated at the community level because each type of disperser may shift to different species in the non-masting years of P. javanica. Our results underscore the need for research on broader spatial and temporal scales, which combines studies of dispersal and plant recruitment, to better understand mechanisms that maintain network stability.     

Advanced REACH Tool (ART): calibration of the mechanistic model

The mechanistic model of the Advanced Reach Tool (ART) provides a relative ranking of exposure levels from different scenarios. The objectives of the calibration described in this paper are threefold: to study whether the mechanistic model scores are accurately ranked in relation to exposure measurements; to enable the mechanistic model to estimate actual exposure levels rather than relative scores; and to provide a method of quantifying model uncertainty. Stringent data quality guidelines were applied to the collated data. Linear mixed effects models were used to evaluate the association between relative ART model scores and measurements. A random scenario and company component of variance were introduced to reflect the model uncertainty. Stratified analyses were conducted for different forms of exposure (abrasive dust, dust, vapours and mists). In total more than 2000 good quality measurements were available for the calibration of the mechanistic model. The calibration showed that after calibration the mechanistic model of ART was able to estimate geometric mean (GM) exposure levels with 90% confidence for a given scenario to lie within a factor between two and six of the measured GM depending upon the form of exposure.     

Submesoscale distribution of Antarctic krill and its avian and pinniped predators before and after a near gale

We conducted two ship-based surveys of the nearshore ecosystem north of Livingston Island, Antarctica during 2–10 February 2005. Between the two surveys, a low-pressure system (963 mbar) passed through the area providing the opportunity to measure ecosystem parameters before and after a near gale. A ship-based multiple-frequency acoustic-backscatter survey was used to assess the distribution and relative abundance of Antarctic krill (Euphausia superba). Net tows, hydrographic profiles, and meteorological data were collected to measure biological and physical processes that might affect the krill population. During the survey, the distribution and behavior of several krill predators [chinstrap penguins (Pygoscelis antarctica), cape petrels (Daption capense), and Antarctic fur seals (Arctocephalus gazella)] were measured from the vessel by visual observations. The survey encompassed an area of roughly 2,500 km², containing two submarine canyons with one to the west and one to the east of Cape Shirreff, which had different abundances of krill and predators. Several aspects of the nearshore ecosystem changed after the near gale including: hydrography of the upper 100 m of the water column, phytoplankton biomass, the abundance and distribution of krill, and the distribution of some krill predators. Differences in these parameters were also measured between the two canyons. These changes in the physical and biological environment during the survey period are quantified and show that the ecosystem exhibited significant changes over relatively short spatial (tens of kilometers) and time (tens of hours) scales.     

OPTIMIZATION OF INTERMITTENT PUMPING SCHEDULES FOR AQUIFER REMEDIATION USING A GENETIC ALGORITHM1

ABSTRACT: Using a genetic algorithm (GA), optimal intermittent pumping schedules were established to simulate pump‐and‐treat remediation of a contaminated aquifer with known hydraulic limitations and a water miscible contaminant, located within the Duke Forest in Durham, North Carolina. The objectives of the optimization model were to minimize total costs, minimize health risks, and maximize the amount of contaminant removed from the aquifer. Stochastic ground water and contaminant transport models were required to provide estimates of contaminant concentrations at pumping wells. Optimization model simulations defined a tradeoff curve between the pumping cost and the amount of contaminant extracted from the aquifer. For this specific aquifer/miscible contaminant combination, the model simulations indicated that pump‐and‐treat remediation using intermittent pumping schedules for each pumping well produced significant reductions in predicted contaminant concentrations and associated health risks at a reasonable cost, after a remediation time of two years.     

Diuron in surface runoff and tile drainage from two grass-seed fields

The typical method of cool-season grass-seed production in Mediterranean climates briefly exposes surface waters to potentially high concentrations of the herbicide diuron [3-(3,4-dichlorophenyl)-1,1-dimethyl urea] during the initial season of growth. To better understand the process, and the degree, of diuron transport from agricultural fields, two grass-seed fields in the Willamette Valley of Oregon were monitored for diuron loss in surface runoff and tile drainage during the first wet season after planting. Initial diuron concentrations in surface runoff were high (>1000 microg L(-1) in one field and >100 microg L(-1) in the other), though they decreased by two orders of magnitude by the end of the season. Concentrations in the tile drains were as much as 1000 times lower than in the surface runoff during the first few weeks of runoff events, and they remained lower than surface water concentrations throughout the season. Total losses in surface runoff were between 1.3 and 3% of the amount applied-much higher than losses via the tile drains. It is also shown by means of a simple first-order decay model that, when little information is available, it may be best to describe diuron depletion in runoff water as a function of cumulative rainfall during the wet season.     

Environmental and production consequences of using alum-amended poultry litter as a nutrient source for corn

Field trials were established to compare alum-treated poultry litter (ATPL), normal poultry litter (NPL), and triple superphosphate (TSP) as fertilizer sources for corn (Zea mays L.) when applied at rates based on current litter management strategies in Virginia. Trials were established in the Costal Plain and Piedmont physiographic regions near Painter and Orange, VA, respectively. Nitrogen-based applications of ATPL or NPL applied at rates estimated to supply 173 kg of plant-available nitrogen (PAN) ha(-1) resulted in significantly lower grain yields than treatments receiving commercial fertilizer at the same rate in 2000 and 2001 at Painter. These decreases in grain yield at the N-based application rates were attributed to inadequate N availability, resulting from overestimates of PAN as demonstrated by tissue N concentrations. However, at Orange no treatment effects on grain yield were observed. Applications of ATPL did not affect Al concentrations in corn ear-leaves at either location. Exchangeable soil Al concentrations were most elevated in treatments receiving only NH4NO3 as an N source. At N-based application rates, the ATPL resulted in lower Mehlich 1-extractable P (M1-P) and water-extractable soil phosphorus (H2O-P) concentrations compared to the application of NPL. A portion of this reduction could be attributed to lower rates of P applied in the N-based ATPL treatments. Runoff collected from treatments which received ATPL 2 d before conducting rainfall simulations contained 61 to 71% less dissolved reactive phosphorus (DRP) than treatments receiving NPL. These results show that ATPL may be used as a nutrient source for corn production without significant management alterations. Alum-treated poultry litter can also reduce the environmental impact of litter applications, primarily through minimizing the P status of soils receiving long-term applications of litter and reductions in runoff DRP losses shortly after application.     

Bottom up and top down: analysis of participatory processes for sustainability indicator identification as a pathway to community empowerment and sustainable environmental management

The modern environmental management literature stresses the need for community involvement to identify indicators to monitor progress towards sustainable development and environmental management goals. The purpose of this paper is to assess the impact of participatory processes on sustainability indicator identification and environmental management in three disparate case studies. The first is a process of developing partnerships between First Nations communities, environmental groups, and forestry companies to resolve conflicts over forest management in Western Canada. The second describes a situation in Botswana where local pastoral communities worked with development researchers to reduce desertification. The third case study details an on-going government led process of developing sustainability indicators in Guernsey, UK, that was designed to monitor the environmental, social, and economic impacts of changes in the economy. The comparative assessment between case studies allows us to draw three primary conclusions. (1) The identification and collection of sustainability indicators not only provide valuable databases for making management decisions, but the process of engaging people to select indicators also provides an opportunity for community empowerment that conventional development approaches have failed to provide. (2) Multi-stakeholder processes must formally feed into decision-making forums or they risk being viewed as irrelevant by policy-makers and stakeholders. (3) Since ecological boundaries rarely meet up with political jurisdictions, it is necessary to be flexible when choosing the scale at which monitoring and decision-making occurs. This requires an awareness of major environmental pathways that run through landscapes to understand how seemingly remote areas may be connected in ways that are not immediately apparent.     

Mass balance modelling of contaminants in river basins: application of the flexible matrix approach

It is useful to have available a variety of catchment-scale water quality models that range in complexity, spatial resolution and data requirements. In a previous paper [Warren, C., Mackay, D., Whelan, M., Fox, K., 2005. Mass balance modelling of contaminants in river basins: a flexible matrix approach. Chemosphere 61, 1458-1467] a series of simple to intermediately complex mass balance models was presented which can be used for tiered exposure assessments in river basins. The connectivity of the segments is expressed using a matrix that permits flexibility in application, enabling the model to be re-segmented and applied to different catchments as required. In this paper, the intermediate models, QWASI matrix-rate constant (QMX-R) and QWASI matrix-fugacity (QMX-F) are used to estimate concentrations of linear alkylbenzene sulfonates (LAS) in the rivers Aire and Calder, UK, and of 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) in the Fraser River basin, Canada. The results compare satisfactorily with monitoring data, suggesting that these QWASI-based models for exposure and risk assessment may be applicable under data-limited conditions. The use of QWASI-based models for regulatory purposes in an evaluative river system is also discussed with reference to assessments of para-dichlorobenzene (pDCB), trichloroethylene (TCE), bis(2-ethylhexyl) phthalate (DEHP) and toluene. It is shown that multi-media QWASI model predictions can be usefully depicted graphically on chemical space diagrams and used to highlight regions in which advection, partitioning to sediments and volatilization may be important determinants of chemical fate in river systems.     

Protected Areas for the Future: Models from the Past

This paper discusses the complexity of the protected area mosaic that has evolved in the United Kingdom over the past 40 or so years. Experimental matrices have been used to assist in the analysis of the various types of protected areas. The trend has been towards the development of protected areas to serve multiple objectives, although categories of protected area introduced under European legislation are more narrowly defined. There has been a proliferation in the number of categories of protected area in the past ten years; since 1990 six new categories of protected area have been established, two resulting from European directives. Most of the protected areas operate indirectly through the planning system and/or voluntary agreements. However, a distinction is drawn between systems for nature conservation and landscape protection with the former relying more on direct controls (ownership and/or legal force). There is considerable potential overlap of protected areas. New categories of protected area have often been superimposed upon the existing system without consideration of whether they will result in duplication of effort, expenditure etc. We conclude that there is scope for some rationalization of the system. Ideally this would involve replacing existing protected areas with broader based ones but considerable simplification could be obtained in practice by making the powers of the agencies more flexible and changing the administrative arrangements for managing the various protected areas.     

Developing a decision support tool for life-cycle cost assessments

Recent years have seen advancements in the development and use of life-cycle assessment (LCA) analytic techniques. Although these techniques have highlighted the power of LCA to identify the environmental consequences of a product system through its entire life cycle, they have also highlighted a major shortcoming of LCA—the lack of cost information. Because companies make daily decisions that involve trade-offs between economics and the environment, including cost information in LCA is critical for advancing its use as an overall environmental decision-making tool. This article outlines the current state of LCA methodology development, defines key life-cycle cost assessment terms and concepts, and evaluates existing cost assessment techniques with the objective of building an integrated life-cycle cost assessment tool.