Twenty years of temporal change in perfluoroalkyl sulfonate and carboxylate contaminants in herring gull eggs from the Laurentian Great Lakes

In this study, temporal trends and patterns of major C(4) to C(15) chain length PFCAs and PFSAs and some sulfonamide, fluorotelomer acid and alcohol precursors were determined in herring gull (Larus argentatus) egg pools. Samples were analyzed from fifteen collection years including 1990 and all years from 1997 to 2010, and from seven colonies located throughout the Great Lakes, ranging from remote to highly urbanized areas. Other than at the Toronto Harbour colony, the slopes of ∑PFSA concentrations (C(6), C(8), and C(10)) versus time were negative indicating general declines between 1990 and 2010. PFOS was the dominant PFSA regardless of colony or year, ranging from 80 to 99% of ∑PFSA. For ∑PFCA (C(8)-C(15)), slopes of concentrations versus time were generally positive with 4 of 7 colonies showing statistically significant (p < 0.05) increases in levels through time. Individual PFCAs showed similar increasing trends except for PFOA. Regardless of colony, the PFCA pattern was dominated by the C(10) to C(13) PFCAs. Consistent with the PFOS declines, concentrations of the PFOS precursor, PFOSA, declined at most colonies between 1990 and 2006 and post-2006 concentrations were below detection limits. Declining concentrations of the C(8) PFCs, PFOS, PFOA and PFOSA, were consistent with the phase out in 2002 by the 3M Company in North America of all of C(8) PFC-related chemistry products. Increasing production volumes of fluorotelomer based compounds, and degradation of these compounds to PFCAs may explain increasing trends of PFCAs in gull eggs. Dietary changes as measured by carbon and nitrogen stable isotopes, showed minimal relationships to PFC levels in gull eggs, which indicates the complexity of aquatic and terrestrial food of gulls and sources of PFCs.     

Assessment and review of organochlorine pesticide pollution in Kyrgyzstan

The current study describes the preliminary assessment and securing activities of the largest and most hazardous POPs-contaminated sites in Kyrgyzstan. In 2010, cattle died and population were found with high pesticide levels in blood, human milk, and placenta. In the first phase of the study, a historic assessment of the pesticide dumping at the landfill/dump sites have been conducted. In the second phase, soil analysis for organochlorine pesticides in the areas of the pesticide disposal sites, the former pesticides storehouses, agro-air strips, and the cotton-growing fields were conducted. By this assessment, a first overview of the types and sources of pollution and of the scale of the problem is compiled including information gaps. From major pesticides used, DDT, DDE, and HCH were measured in the highest concentrations. With the limited analytical capacity present, a reasonable risk assessment could be performed. This paper also reports on practical risk reduction measures that have been carried out recently at the two major pesticide disposal sites with support of a Dutch environmental engineering company, an international NGO (Green Cross Switzerland) and local authorities from the Suzak region within an UN project. Local population living near the sites of the former pesticide storehouses and agro-airstrips are advised not to cultivate vegetables and melons or to raise cattle on these areas. Instead, it is recommended to grow technical crops or plant trees. Further recommendations on monitoring and assessment is given including the suggestion to consider the findings in the National Implementation Plan of Kyrgyzstan.     

Curriculum Development in Environmental Science: A Case Study on Paradigm and Institutions

/ The case of "Environment and Development" at Leiden University, the Netherlands, offers an example of developing a new environmental science curriculum in a conservative, disciplines-oriented university context. The core of this history is the long-term struggle of environmental science to evolve from the level of doing applied interdisciplinary studies and establish itself as a distinct body of knowledge with its own theory level, i.e., a discipline of its own. The struggle itself as well as its final outcome, a "bidisciplinary" curriculum in which both environmental science and one social science are expressed as disciplines (hence not environmental science as a mere "field of application") may be of value in other "classical" universities, too. KEY WORDS: Environmental science; Curriculum; Interdisciplinarity; Universities     

Effect of clays, metal oxides, and organic matter on rhamnolipid biosurfactant sorption by soil

Rhamnolipids produced by Pseudomonas aeruginosa have been proposed as soil washing agents for enhanced removal of metal and organic contaminants from soil. A potential limitation for the application of rhamnolipids is sorption by soil matrix components. The objective of this study is to empirically determine the contribution of representative soil constituents (clays, metal oxides, and organic matter) to sorption of the rhamnolipid form most efficient at metal complexation (monorhamnolipid). Sorption studies show that monorhamnolipid (R1) sorption is concentration dependent. At low R1 concentrations that are relevant for enhancing organic contaminant biodegradation, R1 sorption followed the order: hematite (Fe(2)O(3))>kaolinite>MnO(2) approximately illite approximately Ca-montmorillonite>gibbsite (Al(OH)(3))>humic acid-coated silica. At high R1 concentrations, relevant for use in complexation/removal of metals or organics, R1 sorption followed the order: illite>humic acid-coated silica>Ca-montmorillonite>hematite>MnO(2)>gibbsite approximately kaolinite. These results allowed prediction of R1 sorption by a series of six soils. Finally, a comparison of R1 and R2 (dirhamnolipid) shows that the R1 form sorbs more strongly alone than when in a mixture of both the R1 and R2 forms. The information presented can be used to estimate, on an individual soil basis, the extent of rhamnolipid sorption. This is important for determining: (1) whether rhamnolipid addition is a feasible remediation option and (2) the amount of rhamnolipid required to efficiently remove the contaminant.     

An Australasian model license reassessment procedure for identifying potentially unsafe drivers

Most licensing jurisdictions in Australia currently employ age-based assessment programs as a means to manage older driver safety, yet available evidence suggests that these programs have no safety benefits. This paper describes a community referral-based model license re assessment procedure for identifying and assessing potentially unsafe drivers. While the model was primarily developed for assessing older driver fitness to drive, it could be applicable to other forms of driver impairment associated with increased crash risk. It includes a three-tier process of assessment, involving the use of validated and relevant assessment instruments. A case is argued that this process is a more systematic, transparent and effective process for managing older driver safety and thus more likely to be widely acceptable to the target community and licensing authorities than age-based practices.     

Factors affecting metal concentrations in the upper sediment layer of intertidal reedbeds along the river Scheldt

Factors that play a role in determining metal accumulation in sediments of 26 intertidal marshes which are mainly vegetated by reed plants (Phragmites australis) were assessed along the Scheldt estuary (Belgium and The Netherlands). In the upper 20 cm sediment layer, several physico-chemical properties (clay, silt and sand content, organic matter, carbonate and chloride content, pH and conductivity) and aqua regia extractable metals (Cd, Cr, Cu, Ni, Pb, Zn) were determined. The sediments were significantly contaminated with trace metals. The Cd concentrations often exceeded the Flemish soil remediation thresholds for nature areas, whereas Cr, Cu and Zn levels indicated moderate contamination. Pb concentrations occasionally were high, whereas Ni concentrations leaned towards background values. Organic matter was the single most important predictor variable for total metal contents in regression models, except for Cr. Additional significant predictor variables were clay or chloride content, depending on the metal. Observed metal concentrations at sites within a range of a few km from specific point-sources of metals (e.g. shipyards, industrial areas with metallurgic activities, affluents, major motorways) were somewhat higher than predicted by the models, whereas they were lower than predicted at sites which are regularly subjected to flooding by water of high salinity. The ratio between observed and predicted concentrations seems to be a valuable tool for the identification of areas which are specifically impacted by point sources.     

Modelling heavy metal fluxes from traffic into the environment

A new method is presented which allows emissions of traffic into the environment to be described as a function of road distance. The method distinguishes different types of emissions (runoff, spray and drift), which are determined by measurements and mass balances of a specified road section. The measurement of two-dimensional pollutant concentrations in the road shoulder is an important part of the method. In a case study performed at Burgdorf, Switzerland, the method was applied to the determination of the spatial distribution of heavy metal emissions. The results show that between 36 and 65% of the heavy metals Cd, Cr, Cu, Pb and Zn are present in runoff and spray and between 35 and 64% are dispersed diffusely in the environment (defined as drift). The runoff infiltrates into the vegetated road shoulder up to a distance of approx. 1 m from the road. The distribution of spray shows a maximum at 1 m and decreases steadily up to a distance of 5 m. This information can serve as a basis for the quantitative evaluation of road-runoff treatment scenarios. Although the results of the Burgdorf study are case-specific, several general guidelines for the reduction of traffic-related emissions can be derived from it.     

Factors Affecting the Impact of Off-Road Driving on Soils in an Area in the Kruger National Park, South Africa

Studies on the effects of off-road driving on soils were conducted in the Makuleke Contractual Park of the Kruger National Park. The studies were conducted on three different soils with different textures and soil compactibilities. Traffic pressure was applied with a game drive vehicle loaded with 11 sand bags, each weighing 70?kg. This gave a total vehicle mass of 3,795?kg, simulating a vehicle fully laden with tourists. The study included: (i) comparing of the effects of four different tyre pressures; (ii) comparing the effects of 1–3 vehicle passes over the same tyre tracks; (iii) comparison of traffic effects under dry and wet soil moisture conditions, on soil compaction, respectively. After each pass penetration resistances were measured (a) on the tyre tracks, (b) between the tyre tracks and (c) at different distances outside the tyre tracks. As expected, vehicular traffic caused soil compaction below the wheel tracks. Lower tyre pressures caused less compaction than higher tyre pressures. Fewer vehicle passes also caused less compaction than more passes on the same tracks, but most compaction occurred during the first pass. Thus, driving on the same tracks more than once is less damaging than driving once on different tracks. Controlled traffic should be considered when developing management strategies for off-road driving in wildlife protected areas.     

Validation of the inhalable dust algorithm of the Advanced REACH Tool using a dataset from the pharmaceutical industry

As it is often difficult to obtain sufficient numbers of measurements to adequately characterise exposure levels, occupational exposure models may be useful tools in the exposure assessment process. This study aims to refine and validate the inhalable dust algorithm of the Advanced REACH Tool (ART) to predict airborne exposure of workers in the pharmaceutical industry. The ART was refined to reflect pharmaceutical situations. Largely task based workplace exposure data (n = 192) were collated from a multinational pharmaceutical company with exposure levels ranging from 5 × 10(-5) to 12 mg m(-3). Bias, relative bias and uncertainty around geometric mean exposure estimates were calculated for 16 exposure scenarios. For 12 of the 16 scenarios the ART geometric mean exposure estimates were lower than measured exposure levels with on average, a one-third underestimation of exposure (relative bias -32%). For 75% of the scenarios the exposure estimates were, within the 90% uncertainty factor of 4.4, as reported for the original calibration study, which may indicate more uncertainty in the ART estimates in this industry. While the uncertainty was higher than expected this is likely due to the limited number of measurements per scenario, which were largely derived from single premises.