用UDS试验检测黄浦江水质致遗传毒性

本文运用UDS试验来检测黄浦江水质致遗传毒性,结果表明,试验条件是可行的。UDS试验从DNA修复合成的角度来反映受试物的致遗传毒性作用,可作为水质评价的方法之一。     

光合细菌与酵母跨界融合(杂合)子发酵味精废水研究

光合细菌球形红假单胞菌（Ｒｈｏｄｏｐｓｅｕｄｏｍｏｎａｓ ｓｐｈａｅｒｏｉｄｅｓ）酿酒酵母（Ｓａｃｃｈａｒｏｍｙｃｅｓ ｃｅｒｅｖｉｓｉａｅ）细胞分别经溶菌酶和蜗牛酶脱壁形成原生质体，在聚乙二醇（ＰＥＧ）和Ｃａ＾２＋诱导下实现了真核与原核细胞的超远缘杂交，经抗菌素培养基初步鉴定，融合产物能同时在含有链霉素和制霉菌素的培养基中生长，而双亲细胞只能在含有单一抗菌素的培养基中生长，经初筛与得获得高絮弟性     

我国污水资源化存在问题及其对策

我国是缺水国家,水资源短缺严重制约着发展前景,水污染问题又使缺水状况更加突出.实施污水资源化战略可提高水的利用率,缓解部分水资源紧张问题.     

宜宾市三江水体粪大肠菌群污染现状调查

粪大肠茵群指数(FC)是综合评价城市污水，尤其是生活污水的一个重要指标。本文对宜宾市“三江”水体的FC进行了监测，结果表明“三江”受到了生活污水的污染。丰水期的FC指数超出我国地表水Ⅲ类标准的10倍。     

焦化厂火灾应急预案的建立

从焦化生产的工艺以及产品的特性入手，分析了焦化厂潜在的火灾事故隐患以及发生事故的可能性，强调了焦化厂作为一个化工企业建立应急预案的必要性。阐述了建立应急预案的注意事项和内容。     

Mechanical and Barrier Properties of Biodegradable Films Made from Chitosan and Poly (Lactic Acid) Blends

Biodegradable film blends of chitosan with poly(lactic acid) (PLA) were prepared by solution mixing and film casting. The main goal of these blends is to improve the water vapor barrier of chitosan by blending it with a hydrophobic biodegradable polymer from renewable resources. Mechanical properties of obtained films were assessed by tensile test. Thermal properties, water barrier properties, and water sensitivity were studied by differential scanning calorimeter analysis, water vapor permeability measurements, and surface-angle contact tests, respectively. The incorporation of PLA to chitosan improved the water barrier properties and decreased the water sensitivity of chitosan film. However, the tensile strength and elastic modulus of chitosan decreased with the addition of PLA. Mechanical and thermal properties revealed that chitosan and PLA blends are incompatible, consistent with the results of Fourier transform infrared (FTIR) analysis that showed the absence of specific interaction between chitosan and PLA.     

Green roof stormwater retention: effects of roof surface, slope, and media depth

Urban areas generate considerably more stormwater runoff than natural areas of the same size due to a greater percentage of impervious surfaces that impede water infiltration. Roof surfaces account for a large portion of this impervious cover. Establishing vegetation on rooftops, known as green roofs, is one method of recovering lost green space that can aid in mitigating stormwater runoff. Two studies were performed using several roof platforms to quantify the effects of various treatments on stormwater retention. The first study used three different roof surface treatments to quantify differences in stormwater retention of a standard commercial roof with gravel ballast, an extensive green roof system without vegetation, and a typical extensive green roof with vegetation. Overall, mean percent rainfall retention ranged from 48.7% (gravel) to 82.8% (vegetated). The second study tested the influence of roof slope (2 and 6.5%) and green roof media depth (2.5, 4.0, and 6.0 cm) on stormwater retention. For all combined rain events, platforms at 2% slope with a 4-cm media depth had the greatest mean retention, 87%, although the difference from the other treatments was minimal. The combination of reduced slope and deeper media clearly reduced the total quantity of runoff. For both studies, vegetated green roof systems not only reduced the amount of stormwater runoff, they also extended its duration over a period of time beyond the actual rain event.     

MicroRNA: a novel implication for damage and protection against ionizing radiation

Environmental Science and Pollution Research - Ionizing radiation (IR) is a form of high energy. It poses a serious threat to organisms, but radiotherapy is a key therapeutic strategy for various...     

How air pollution lowers the domestic value-added ratio in exports: an empirical study of China

Environmental Science and Pollution Research - This paper analyzes the theoretical mechanism and transmission channel for the impact of air pollution on firms’ domestic value-added ratio...     

制备参数对Mn-Ce/TiO2催化剂脱硝性能的影响

以锐钛矿型TiO₂为载体,采用分步共混法制备了Mn-Ce/TiO₂催化剂,通过考察不同活性组分前驱体、焙烧温度以及活性组分负载量对催化剂样品脱硝性能的影响,以确定最佳制备参数;结合XRD（X射线衍射）、XPS（X射线光电子能谱分析）、BET比表积等表征手段研究制备参数对催化剂性能的影响.结果表明:无定型态MnO₂含量越多,越有利于提高催化剂的脱硝活性;催化剂样品表面原子浓度比Mn/Ti[或（Mn+Ce）/Ti]越高,催化剂表面有效活性组分越多,催化剂脱硝活性越好.以自制Mn盐（MX）为前驱体,在Mn-Ce活性组分负载量为16%时,经500℃焙烧的催化剂样品脱硝活性最高;反应空速为10000 h-1,反应温度为80℃时,其脱硝效率可达80%,150℃时脱硝效效率可达99%.