黄孢原毛平革菌在E段废水中的生长特性与脱色作用

利用GCMS定性分析漂白废水主要发色物质的种类，对黄孢原毛平革菌在抑制条件下的生长与脱色作用进行试验研究，结果表明，废水中各类高分子量有机污染物是形成色度的主要来源，此类物质在菌对数生长阶段被大量降解。     

染料废水脱色混凝剂(PSDC-Ⅰ) 的制备和效果实验

研究了由固体废物 (炼铁废渣 )制取的含有多种金属离子的染料废水脱色混凝剂 (PSDC Ⅰ ) ,试验了它对染料废水的脱色效果及对印染废水的混凝效果 ,并与PAC进行了比较。考察了影响PSDC Ⅰ混凝及脱色效果的因素。结果表明 ,pH值在 6— 10范围内 ,PSDC Ⅰ具有良好的混凝效果。PSDC Ⅰ的两个最佳脱色区为 pH值 6— 8和 pH值 13左右。与PAC相比 ,PSDC Ⅰ不仅具有良好的混凝效果而且具有良好的脱色效果     

带长链烷基季铵盐杀菌活性官能团树脂的合成

以强酸型阳离子交换树脂作载体 ,合成磺酰氯树脂后固载乙二胺并胺基叔胺化 ,最后加卤代烷合成带长链烷基季铵盐杀菌活性官能团树脂 ,确定了合成路线中的各步反应条件。对异养菌的杀菌性能测定结果表明 ,合成的杀菌树脂的杀菌率在测定条件下都达到了 90 %以上 ,有望用于工业和民用水的杀菌消毒     

脂多糖诱发生物体内合成NO_2~－和胺类化合物的研究

脂多糖诱发生物体内合成ＮＯ_２~－和胺类化合物的研究宋秀贤，赵海涛，金秀兰许后效，林继红，陆德培（中国科学院生态环境研究中心，北京，１０００８５）关键词亚硝酸根；胺类化合物；生物合成；脂多糖．一些研究已经证明Ｎ－亚硝基化合物（ＮＯＣ）对动物存在致癌性￣...     

我国资源开发利用中的价格问题

资源开发利用是经济学研究的一个基本问题，资源利用的价格问题在中国社会主义市场经济机制建设与发展中十分重要。在我国，卡尔·马克思的劳动价值理论是资源利用价格问题研究的基础，但需要吸收其它成功的尤其是西方的理论与实践之处。对于资源价格问题，不仅需要研究其市场因素，而且要研究其非市场因素；同时，在资源价格机制研究中，政府功能的问题也十分重要。     

制备方法对MgAl水滑石衍生氧化物负载钯催化剂丙烷完全氧化活性的影响

以沉积沉淀法(DP)、浸渍法(IM)和共沉淀法(CP)制备MgAl水滑石衍生氧化物负载钯催化剂,用ICP、XRD、SEM、TEM、EDS、TPR以及比表面测定等手段对催化剂进行了表征.ICP和XRD数据表明用上述3种方法均可成功制备水滑石为前体载钯催化剂.SEM、TEM、EDS数据表明不同方法制备的样品具有不同的形貌以及钯在其中的分散度.综合各类表征数据可知Pd在催化剂中暴露的活性位是影响其活性的主要因素.     

铁炭微电解深度处理焦化废水的研究

采用曝气铁炭微电解工艺对焦化废水进行了深度处理.结果表明,在活性炭、铁屑和NaCl投加量分别为10 g/L、30 g/L和200 mg/L的条件下反应240 min,出水COD去除率在30%～40%;酸性条件可以进一步提高COD去除率;微电解可以去除原生化出水中的难降解有机物,出水物质的分子量主要集中于2000 Da以下,以脂类和烃类化合物为主;出水的可生化性有了大幅度提高,BOD5/COD由0.08增加到0.53.实验结果表明,铁炭微电解是深度处理焦化废水的一种有效工艺.     

Prevalence and Bayesian Phylogenetics of Enteroviruses Derived From Environmental Surveillance Around Polio Vaccine Switch Period in Shandong Province,China

Food and Environmental Virology - We present the results of environmental surveillance for poliovirus (PV) and non-poliovirus (NPEV) around the switch from trivalent to bivalent oral polio-vaccine...     

Insights into sludge granulation during anaerobic treatment of high-strength leachate via a full-scale IC reactor with external circulation system

In this study, a full-scale internal circulation(IC) reactor coupled with an external circulation system was developed to treat high-strength leachate from a municipal solid waste(MSW)incineration plant, in which anaerobic sludge granulation was intensively investigated. Results showed that the IC reactor achieved excellent treatment performance under high organic loading rates(OLR) of 21.06–25.16 kg chemical oxygen demand(COD)/(m3? day). The COD removal efficiency and biogas yield respectively reached 89.4%–93.4% and 0.42–0.50 m3/kg COD.The formation of extracellular polymeric substances(EPS) was closely associated with sludge granulation. Protein was the dominant component in sludge EPS, and its content was remarkably increased from 21.6 to 99.7 mg/g Volatile Suspended Solid(VSS) during the reactor operation. The sludge Zeta potential and hydrophobicity positively correlated with the protein/polysaccharide ratio in EPS, and they were respectively increased from-26.2 m V and 30.35% to-10.6 m V and 78.67%, which was beneficial to microbial aggregation. Three-dimensional fluorescence spectroscopy(3 D-EEM) and Fourier transform infrared spectroscopy(FT-IR)analysis further indicated the importance of protein-like EPS substances in the sludge granulation. Moreover, it was also found that the secondary structures of EPS proteins varied during the reactor operation.     

Characteristics of molecular weight distribution of dissolved organic matter in bromide-containing water and disinfection by-product formation properties during treatment processes

The characteristics of dissolved organic matter (DOM) and bromide ion concentration have a significant influence on the formation of disinfection by-products (DBPs). In order to identify the main DBP precursors, DOM was divided into five fractions based on molecular weight (MW), trihalomethane formation potential and haloacetic acid formation potential were determined for fractions, and the change in contents of different fractions and total DBPs during treatment processes (pre-chlorination, coagulation, sand filtration, disinfection) were studied. Moreover, the relationship between bromide concentration and DBP generation characteristics in processes was also analyzed. The results showed that the main DBP precursors were the fraction with MW < 1 kDa and fraction with MW 3−10 kDa, and the DBP''s generation ability of lower molecular weight DOM (< 10 kDa) was higher than that of higher molecular weight DOM. During different processes, pre-chlorination and disinfection had limited effect on removing organics but could alter the MW distribution, and coagulation and filtration could effectively remove organics with higher MW. For DBPs, trihalomethanes (THMs) were mainly generated in pre-chlorination and disinfection, while haloacetic acids (HAAs) were mostly generated during pre-chlorination; coagulation and sand filtration had little effect on THMs but resulted in a slight removal of HAAs. In addition, the results of ANOVA tests suggested that molecular sizes and treatment processes have significant influence on DBP formation. With increasing bromide concentration, the brominated DBPs significantly increased, but the bromine incorporation factor in the processes was basically consistent at each concentration.