磁性Fen+@GO非均相Fenton催化氧化亚甲基蓝

采用化学共沉淀法制备了磁性Feⁿ⁺@GO（MFGO）纳米复合材料,并将其用于非均相Fenton催化氧化亚甲基蓝（MB）.扫描电镜、透射电镜和光电子能谱分析表明,催化活性粒子（Feⁿ⁺/铁氧化物）成功负载在GO表面.实验研究了pH值、H₂O₂初始浓度、催化剂投加量等因素对MB降解效果的影响.结果表明,H₂O₂、MFGO和H₂O₂+MFGO体系在反应120min后,MB降解率分别达到7.83%、25.58%和99.19%;在优化条件为H₂O₂浓度0.79mol/L、MFGO用量0.75g/L、pH值8时,MB降解率可达99.90%;在pH值为3~11范围内,MB降解率均在99%以上;MFGO经过6次重复使用后对MB的降解率仍可达到95.08%,是一种pH值响应宽、可磁分离回收的新型非均相催化剂.     

Theoretical study on the formation mechanism of polychlorinated dibenzothiophenes/thianthrenes from 2-chlorothiophenol molecules

Homogeneous formation of polychlorinated dibenzothiophenes/thianthrenes(PCDT/TAs),sulfurated compounds analogous to polychlorinated dibenzo-p-dioxin/dibenzofurans(PCDD/Fs), has been well-documented to occur via radical–radical coupling reactions from chlorinated thiophenol precursors. However, the current understanding of the formation mechanism of PCDT/TAs is exclusively limited to the inherent point of view that chlorothiophenoxy radicals act as the only required intermediates for PCDT/TAs. This study investigates reaction pathways for the formation of PCDT/TAs involving two new types of radical species, i.e., substituted phenyl radicals and substituted thiophenoxyl diradicals. Taking 2-chlorothiophenol(2-CTP) as a model compound for chlorothiophenols,we found that apart from the mostly discussed chlorothiophenoxy radicals, substituted phenyl radicals and substituted thiophenoxyl diradicals could also be readily formed via the reaction of 2-CTP with H radicals. Furthermore, direct self-and cross-coupling of these radicals can result in the formation of PCDT/TAs, including 1-monochlorothianthrene(1-MCTA), 1,6-dichlorothianthrene(1,6-DCTA), 4,6-dichlorodibenzothiophene(4,6-DCDT)and 1,6-dichlorodibenzothiophene(1,6-DCDT). The pathways proposed in this work are proven to be both thermodynamically and kinetically favorable. Particularly, comparisons were made between the formation mechanisms of sulfurated and oxygenated dioxin systems from an energetic point view, showing that replacing oxygen with sulfur atoms greatly reduces the activation barriers of the rate-controlling steps involved in the PCDT/TA formation processes compared with those involved for PCDD/Fs. The calculated results in this work may improve our understanding of the formation mechanism of PCDT/TAs from chlorothiophenol precursors and should be informative to environmental scientists.     

Baosteel emission control significantly benefited air quality in Shanghai

As the largest iron and steel producer in China, a part of Baosteel moved out of Shanghai deserves close attention due to its environmental impact. To understand the effect of Baosteel emission control on air quality in Shanghai, daily PM_(10), PM_(2.5), SO_2, NO_2 and CO were measured from 2010 to 2016. Concentrations of pollutants in Baoshan District presented a decreased trend during 2010–2016, with a reduction rate of 28.6% for PM_(10), 67.3% for SO_2, 8.6% for NO_2 and 42.0% for CO. However, fine particle pollution in Baoshan District during 2012–2016 seems to become more prominent, with PM_(2.5) concentration of 47 ± 28,45 ± 33, 38 ± 24, 54 ± 41 and 51 ± 34 μg/m3, respectively, indicating a slight increase of 8.5%in PM_(2.5). Concentrations of PM_(10) and CO decreased by 12.5% and 33.8% in the second half year in 2016(compared with that in 2015) probably due to closure of blast furnace of Baosteel. Baosteel was identified as the largest pollution source in Baoshan District.Emission from Baosteel accounted for 58.0% of SO_2, 43.6% of NO_2 and 79.3% of dust in total emission from Baoshan District during 2010–2015. Meanwhile, pollutant emission and coal consumption from Baosteel decreased by 52.0% for SO_2, 40.1% for NO_2, 15.7% for dust and22% for coal consumption. Energy consumption in Baoshan District reduced by 31% from2011 to 2015. Air quality improvement in Shanghai was attributed to local emission reduction, together with regional air quality improvement.     

Removal of nutrients and veterinary antibiotics from swine wastewater by a constructed macrophyte floating bed system

The potential of three varieties of Italian ryegrass (Lolium multiflorum Lam.), Dryan, Tachimasari and Waseyutaka, to improve the water quality of swine wastewater was evaluated using a constructed macrophyte floating bed system. With respect to reductions in levels of nutrients, chemical oxygen demand (COD), and sulfonamide antimicrobials (SAs, including sulfadiazine, sulfamethazine, and sulfamethoxazole), Dryan performed better than Tachimasari and Waseyutaka. For Dryan, total N was reduced by 84.0%, total P by 90.4%, COD by 83.4% and sulfonamide antimicrobials by 91.8–99.5%. Similar results were observed for Tachimasari and Waseyutaka. The results indicated that the treatment of swine wastewater using the constructed macrophyte floating bed system was effective in the removal of nutrients and veterinary antibiotics.     

Biodegradation of nicosulfuron by the bacterium Serratia marcescens N80

By enrichment culturing of the sludge collected from the industrial wastewater treatment pond, we isolated a highly efficient nicosulfuron degrading bacterium Serratia marcescens N80. In liquid medium, Serratia marcescens N80 grows using nicosulfuron as the sole nitrogen source, and the optimal temperature, pH values, and inoculation for degradation are 30–35°C, 6.0–7.0, and 3.0% (v/v), respectively. With the initial concentration of 10 mg L^?1, the degradation rate is 93.6% in 96 hours; as the initial concentrations are higher than 10 mg L^?1, the biodegradation rates decrease as the nicosulfuron concentrations increase; when the concentration is 400 mg L^?1, the degradation rate is only 53.1%. Degradation follows the pesticide degradation kinetic equation at concentrations between 5 mg L^?1 and 50 mg L^?1. Identification of the metabolites by the liquid chromatography/mass spectrometry (LC/MS) indicates that the degradation of nicosulfuron is achieved by breaking the sulfonylurea bridge. The strain N80 also degraded some other sulfonylurea herbicides, including ethametsulfuron, tribenuron-methyl, metsulfuron-methyl, chlorimuron-ethyl,and rimsulfuron.     

Accumulation and transportation of copper in different ecotypes of Leersia hexandra Swartz

ABSTRACT

This study used hydroponics with different copper (Cu) concentrations to assess metal accumulation and growth in two different populations of Leersia hexandra Swartz, one obtained from a contaminated area (CP) and the other from a non-contaminated area (NCP). Data demonstrated that Cu exerted a lesser effect on the biomass of CP than NCP. The root and shoot biomass measurements of CP were significantly higher than those noted at NCP. Copper concentration in the tissues of L. hexandra from CP increased markedly correlated with the concentration of metal in the culture solution, and this trend was stronger than that in NCP. Copper concentrations in roots and shoots were significantly higher in CP than NCP. As Cu stress levels in the culture solution rose, the transport coefficient of both populations decreased. Furthermore, the coefficient of CP was significantly higher than NCP. At a Cu concentration of 38.4 mg/L, the transfer factor value of CP is 40% higher than NCP. In summary, CP showed higher accumulation and resistance to Cu compared with NCP.     

高炉煤气洗涤水氰化物产生及控制对策探讨

通过分析高炉煤气洗涤水氰化物的产生机理,探讨了湘钢1#高炉煤气洗涤水氰化物超标的主要原因,结合高炉煤气洗涤水处理氰化物的治理现状,提出了相应的治理对策.     

静电纺壳聚糖/聚乙烯醇纳米纤维膜对Cu~(2+)、Ni~(2+)及Cd~(2+)的吸附特性

采用SEM、FTIR、XRD、BET等技术对静电纺丝制得的吸附材料壳聚糖/聚乙烯醇(CS/PVA)纳米纤维膜进行表征,并通过对模拟重金属离子废水的吸附实验,系统考察了溶液pH、重金属离子(Cu2+、Ni2+及Cd2+)初始浓度和反应温度对吸附的影响.结果表明,在外加电压25kV、接触距离15.0 cm、纺丝速度0.15 m L·h-1的条件下,可制得CS/PVA质量比为20/80的连续无缺陷的平均直径76.31 nm、比表面积219.4m2·g-1的纤维膜.CS/PVA纳米纤维膜对重金属离子的吸附在2 h内达到平衡,其吸附容量随着温度的升高而升高,随着初始浓度的增大而增大,随着pH值的升高而提高,在pH=5.5时达到最大.在25℃和pH=5.5的条件下,用CS/PVA纳米纤维膜吸附浓度100 mg·L-1的Cu2+、Ni2+和Cd2+溶液,吸附容量分别为98.65、116.89和124.23 mg·g-1,且对重金属吸附无选择性.吸附过程符合Langmuir和Freundlich等温吸附模型,吸附动力学同时匹配准一级动力学模型和准二级动力学模型.热力学参数(ΔG、ΔH和ΔS)计算结果表明,CS/PVA纳米纤维膜对重金属离子的吸附是自发的吸热反应.     

高分辨率气相色谱/高分辨率质谱同位素内标法测定烟气样品中的多氯萘

多氯萘(PCNs)同二噁英(PCDD/Fs)和类二噁英多氯联苯(PCBs)类似,在烟气中的含量处于痕量水平,一般都在pg·m-3以下,因此分析方法要求有较高的灵敏度和选择性.以国内外的研究方法和参考文献为基础,建立了同位素内标稀释高分辨气相色谱/高分辨率质谱联用对垃圾焚烧发电厂的烟气样品中的PCNs进行分析.结果表明,该方法对17种氯取代位的PCNs单体的空白干扰在N.D.—2.1 pg之间;方法检出限范围为2.8—9.1 pg·nm-3,线性范围为0.40—240 pg·μL-1;空白加标实验中目标化合物的回收率为84.62%—116.21%,提取内标回收率为40.41%—75.79%,采样内标的回收率为88.92%—89.89%.实际烟气样品测得17种PCNs的同系物浓度分布在8.79—509 pg·nm-3之间,PCN-6的含量最高,PCNs-31S含量最低,相对标准偏差在4.43%—14.44%.该分析方法具有较高的准确性和可靠性,适用于烟气样品中多氯萘物质的测定.     

紫外分光光度法测定污水COD值的误差分析研究

针对紫外分光光度法测定污水COD值的误差分析问题,给出了实验的仪器和试剂的配制方法,如测试主要仪器设备和主要试剂的配制,介绍了测定水样的采集地点,介绍了重铬酸钾法的测定原理及步骤,重铬酸钾法的测定原理和重铬酸钾法的测定步骤,紫外分光光度法的测定原理及步骤,如紫外分光光度法的测定原理和紫外分光光度法的测定步骤,并对结果进行了讨论,紫外分光光度法,标准曲线的确定,测定的结果比较和方法的准确度和精密度比较.