Effects of ocean temperature on the southern range limits of two understory kelps, <Emphasis Type="Italic">Pterygophora californica</Emphasis> and <Emphasis Type="Italic">Eisenia arborea</Emphasis>, at multiple life-stages

Environmental factors have long been shown to influence species distributions, with range limits often resulting from environmental stressors exceeding organism tolerances. However, these abiotic factors may differentially affect species with multiple life-history stages. Between September 2004 and January 2006, the roles of temperature and nutrient availability in explaining the southern distributions of two understory kelps, Pterygophora californica and Eisenia arborea (Phaeophyceae, Laminariales), were investigated along the coast of California, USA and the Baja California Peninsula, Mexico, by limiting either: (a) tissue nitrogen uptake and storage by adult sporophytes during periods of elevated temperature, and/or (b) production of embryonic sporophytes by microscopic gametophytes. Results suggest that while adult sporophytes of both species are tolerant of high temperatures and low nutrients, reproduction by their microscopic stages is not. Specifically, while E. arborea produced embryonic sporophytes at both 12 and 18°C, temperatures commonly observed throughout the southern portion of its range, P. californica produced sporophytes at 12 but not at 18°C. As a result, it appears that the southern distribution of P. californica, which ends in northern Baja California, Mexico, may be limited by temperature acting on its microscopic stages. In contrast, the ability of E. arborea’s microscopic and adult stages to tolerate elevated temperatures allows it to persist in the warmer southern waters of Baja California, as well as to the north along the California coast where both species co-occur.     

A comparison of speciated atmospheric mercury at an urban center and an upwind rural location

Gaseous elemental mercury (GEM), particulate mercury (PHg) and reactive gaseous mercury (RGM) were measured every other hour at a rural location in south central Wisconsin (Devil's Lake State Park, WI, USA) between April 2003 and March 2004, and at a predominantly downwind urban site in southeastern Wisconsin (Milwaukee, WI, USA) between June 2004 and May 2005. Annual averages of GEM, PHg, and RGM at the urban site were statistically higher than those measured at the rural site. Pollution roses of GEM and reactive mercury (RM; sum of PHg and RGM) at the rural and urban sites revealed the influences of point source emissions in surrounding counties that were consistent with the US EPA 1999 National Emission Inventory and the 2003-2005 US EPA Toxics Release Inventory. Source-receptor relationships at both sites were studied by quantifying the impacts of point sources on mercury concentrations. Time series of GEM, PHg, and RGM concentrations were sorted into two categories; time periods dominated by impacts from point sources, and time periods dominated by mercury from non-point sources. The analysis revealed average point source contributions to GEM, PHg, and RGM concentration measurements to be significant over the year long studies. At the rural site, contributions to annual average concentrations were: GEM (2%; 0.04 ng m(-3)); and, RM (48%; 5.7 pg m(-3)). At the urban site, contributions to annual average concentrations were: GEM (33%; 0.81 ng m(-3)); and, RM (64%; 13.8 pg m(-3)).     

The effects of mobile speed camera introduction on road traffic crashes and casualties in a rural county of England

PROBLEM: This study assesses the impact of crash and casualty numbers in correspondence to the introduction of mobile speed cameras in the rural county of Norfolk, England. METHOD: Road traffic accident casualty and crash data were collected for two years before the introduction of cameras and two years subsequently. The casualties and crashes occurring at 29 camera sites were identified and separated from those occurring in the rest of the county. Trends in crashes and casualties, and their severity, were examined graphically and comparisons were made between before and after periods. The regression to the mean effect at individual sites was estimated. RESULTS: After the introduction of cameras, overall crashes declined by 1% and crashes involving fatalities or serious injuries declined by 9% on the roads without cameras. At the camera sites, crashes decreased by 19% and fatal and serious crashes by 44%. The reduction in total crashes was significantly greater than that expected from the effect of regression to the mean in 12 out of 20 sites tested. SUMMARY: The introduction of cameras appears to have resulted in real and measurable reductions in crash risk in this rural county. IMPACT ON INDUSTRY: Our results suggest the deployment of mobile speed cameras is an effective tool for organizations wishing to reduce road traffic casualties in areas where high crash rates have been associated with excessive vehicle speeds.     

An assessment of land-based climate and carbon reversibility in the Australian Community Climate and Earth System Simulator

Future levels of climate change depend not only on carbon emissions but also on carbon uptake by the land and the ocean. Here we are using the Earth system model (ESM1) version of the Australian Community Climate and Earth System Simulator (ACCESS) to explore the potential and impact of removing carbon dioxide (CO₂) from the atmosphere through the climate and carbon cycle reversibility experiment. This experiment builds on the standard Coupled Model Intercomparison Project (CMIP) experiment, increasing CO₂ at 1% per year until 4xCO₂ is reached. The atmospheric CO₂ levels are then decreased at the same rate which brings the CO₂ back to pre-industrial levels. We then continue to run the model with constant CO₂ for another 350 years. Our analysis focuses on the response of the land carbon cycle. We find that carbon stores are largely reversible at the global scale over the timescale of changing CO₂. However, carbon stores continue to decrease after CO₂ returns to its initial value, and the land loses another 40 Pg of carbon (PgC) with the largest change in the tropics. It takes about 300 years beyond the period of changing CO₂ for the carbon stores to recover. Interestingly, we saw strong regional variations in the strength of the land response to changing CO₂. Australia showed the largest increase/decrease in biomass carbon (about 40%) and the largest variability in productivity, which was strongly correlated with rainfall. This highlights the importance of assessing the regional response to understanding the processes underlying the response and the sensitivity of these processes within each model. This understanding will benefit future multi-model analyses of this reversibility experiment. It also illustrates more generally the potential to use Earth system model experiments as part of the evaluation of proposed applications of carbon dioxide removal (CDR) technologies. As such, we recommend that these types of modelling experiments be included when mitigation policies are developed.

     

A comparison of X-ray fluorescence and wet chemical analysis of air filter samples from a scrap lead smelting operation

Personal and area air samples were taken at a scrap lead smelter operation in a bullet manufacturing facility. Samples were taken using the 37-mm styrene-acrylonitrile closed-face filter cassette (CFC, the current US standard device for lead sampling), the 37-mm GSP or "cone" sampler, the 25-mm Institute of Occupational Medicine (IOM) inhalable sampler, and the 25-mm Button sampler (developed at the University of Cincinnati). Polyvinylchloride filters were used for sampling. The filters were pre- and post-weighed, and analyzed for lead content using a field-portable X-ray fluorescence (XRF) analyzer. The filters were then extracted with dilute nitric acid in an ultrasonic extraction bath and the solutions were analyzed by inductively coupled plasma optical emission spectroscopy. The 25-mm filters were analyzed using a single XRF reading, while three readings on different parts of the filter were taken from the 37-mm filters. The single reading from the 25-mm filters was adjusted for the nominal area of the filter to obtain the mass loading, while the three readings from the 37-mm filters were inserted into two different algorithms for calculating the mass loadings, and the algorithms were compared. The IOM sampler was designed for material collected in the body of the sampler to be part of the collected sample as well as that on the filter. Therefore, the IOM sampler cassettes were rinsed separately to determine if wall-loss corrections were necessary. All four samplers gave very good correlations between the two analytical methods above the limit of detection of the XRF procedure. The limit of detection for the 25-mm filters (5 microg) was lower than for the 37-mm filters (10 microg). The percentage of XRF results that were within 25% of the corresponding ICP results was evaluated. In addition, the bias from linear regression was estimated. Linear regression for the Button sampler and the IOM sampler using single readings and the GSP using all tested techniques for total filter loading gave acceptable XRF readings at loadings equivalent to sampling at the OSHA 8-hour Action Level and Permissible Exposure Limit. However, the CFC only had acceptable results when the center reading corrected for filter area was used, which was surprising, and may be a result of a limited data set. In addition to linear regression, simple estimation of bias indicated reasonable agreements between XRF and ICP results for single XRF readings on the Button sampler filters, (82% of the individual results within criterion), and on the IOM sampler filters (77% or 61%--see text), and on the GSP sampler filters using the OSHA algorithm (78%). As a result of this pilot project, all three samplers were considered suitable for inclusion in further field research studies.     

The importance of temperature in assessing iron pipe corrosion in water distribution systems

Temperature is expected to play a significant role in the corrosion of iron pipes in drinking water distribution systems. Temperature impacts many parameters that are critical to pipe corrosion including biological activity, physical properties of the solution, thermodynamic and physical properties of corrosion scale, and chemical rates. Moreover, variations in temperature and temperature gradients may give rise to new corrosion phenomena worthy of consideration by water treatment personnel.     

An application of circular-linear correlation analysis to the relationship between Freon concentration and wind direction in Woods Hole,Massachusetts

Two statistical tests for correlation between a circular variate and a linear variate are presented. The tests are applied to a small data set concerning Freon-12 concentration and wind direction in Woods Hole, Massachusetts during the summer of 1987. A significant correlation is found. Further analysis suggests that this directional effect is related to onshore Freon-12 release.Woods Hole Oceanographic Institution Contribution Number 6750     

Biological complexity confounds the separation of point- and non-point sources of human impact on the natural world

Identifying process from pattern is one of the most vexing tasks inenvironmental monitoring. Given information on the distribution of speciesin a pre-defined area, together with comprehensive data on how environmentalconditions in that area have altered through time, is it possible toidentify the factors controlling the species‘ layout? Here, the practicalsignificance of this quandary is demonstrated using a series ofenvironmentally-degraded coastal lagoons in New South Wales. The TuggerahLakes (33°17′S,151°30′E) have over the last 50 yearsexperienced significant changes in species‘ distributions. Seagrasses,macroalgae, phytoplankton, molluscs, prawns and the jellyfish Catostylus mosaicus have altered in spatial pattern. Two human activitieshave been blamed for these perturbations: (1) agricultural clearance ofnative vegetation from the catchment, with associated input of top-soil andnutrients; (2) the commissioning of a coal-fired power station in 1967, withmassive uptake and recirculation of lake water for cooling purposes. In thispaper, spatial changes in macrophyte distributions over the last 50 yearsare reviewed in an attempt to identify the true source(s) of perturbation.The model adopted assumes that the power station is a point source of impactwhile nutrient inputs from the catchment are a diffuse source of impact;changes in species distributions can hypothetically be related back to thesesources according to whether they are localised or widespread. However,after a comprehensive analysis of available macrophyte data derived frominterviews, aerial photography and line transect methodologyies theconclusion is reached that changes in biogeographical pattern around theTuggerah Lakes cannot be attributed to specific anthropogenic pressures atanything beyond the coarsest of levels. This is considered to be the normfor most coastal management situations where natural background variation(’noise‘) and the complexity of linkages between physical, chemical andbiological components confounds the identification of causal relationships.The practical implications of this conclusion are discussed in the contextof litigation and remedial management design. Emphasis is placed on theneed to adopt an adaptive approach to estuarine management, incorporatingexplicit recognition of the limitations of available data, and to developnew techniques for identifying cause-effect relationships.