沈阳市降雪中PFOS和PFOA污染现状调查

通过调查降雪中PFOS和PFOA的浓度,阐明了沈阳市大气中PFOS和PFOA的污染状况和污染规律.2006-02-06采集沈阳市区和郊区共计36个采样点的降雪样品,2006-02-25在其中5个采样点再次采集降雪样品.固相萃取融雪水中的PFOS和PFOA,利用LC-MS-SIM法测定样品中PFOS和PFOA浓度.全部样品中均检出PFOS和PFOA.2006-02-06降雪中PFOS和PFOA的浓度几何平均值分别为2.0 ng·L^-1（范围：0.4～46.2 ng·L^-1）和3.6 ng·L^-1（范围：1.6～22.4 ng·L^-1）,95%置信区间分别为1.5～2.8 ng·L^-1和3.1～4.2 ng·L^-1.PFOS和PFOA的最高浓度同时出现在郊区采样点朱尔屯,市中心区2种物质的浓度呈显著正相关.2006-02-25的5个采样点降雪中PFOS和PFOA的浓度几何平均值均为2.2 ng·L^-1.2次降雪中PFOS浓度差异不显著,2006-02-25降雪中PFOA浓度高于2006-02-06.结果表明,沈阳市区和郊区降雪中广泛存在PFOS和PFOA污染,局部区域可能存在共同的PFOS和PFOA污染来源;沈阳地区有较稳定的PFOS来源持续向大气中输送该类物质;PFOS和PFOA的环境行为可能不同.     

沸石强化生化装置脱氮功能的效果及机理初探

针对石化工业废水开展沸石强化脱氮处理试验研究,通过比较沸石浓度25mg/L与空白,以及沸石浓度25 mg/L与50mg/L两阶段脱氮效果,探讨沸石促进脱氮功能的机理,结果表明,曝气池中投加沸石可明显提高氨氮和总氮的去除率,硝化细菌总数和硝化功能也得到增强。与空白对照组相比, 沸石浓度25mg/L的试验组运行稳定后,氨氮去除率提高约10%~13%,总氮去除率约提高13%,出水中NO3--N含量约提高100%,氨氮与总氮之比下降6%,内源硝化耗氧呼吸速率可提高138%,硝化细菌总数是空白对照组2.2folds。沸石浓度提高到50mg/L后,试验组的脱氮效果略有增加,但效果不明显。通过对试验结果的关联分析,认为沸石提高系统脱氮能力的原因一方面是因为沸石对NH4+及硝态氮的交换吸附,另一方面NH4+离子富集于沸石表面及内部、沸石颗粒独特的好氧-缺氧微环境,以及沸石离解出CO32- 或HCO3-增加碱度等条件,促进了硝化细菌和反硝化细菌的生长,从而提高了系统脱氮能力。     

装置级突发事故应急预案编制的思考与对策

结合石化企业装置生产特点,分析装置级突发事故应急预案编制中存在的不足和问题,并对应急预案编制的思路和处置对策进行了深入地探讨.     

大气气溶胶中碘形态研究进展

大气中的碘直接影响对流层中多种光化学反应并间接影响全球气候变化,因而碘的大气化学机制研究受到越来越多关注.气溶胶中的碘是其大气化学反应的最终产物,通过其赋存形态可以推测和了解碘的大气化学过程.大气碘化学理论一直认为IO3-是大气碘沉降中最主要的碘形态,但近年来的各地实测数据发现大气气溶胶中的碘形态大多以可溶性有机碘或I-为主.这种分歧说明目前的大气碘化学理论尚有待完善.本文详细介绍了近年来碘的大气化学以及气溶胶颗粒物中碘形态的研究进展.     

Effect of platinum on the photocatalytic degradation of chlorinated organic compound

TiO2 nanoparticles, doped with di erent Pt contents, were prepared by a modified photodeposition method using Degussa P-25 TiO2, H2PtCl6 6H2O and methanol as the solvents. The physicochemical properties of Pt/TiO2 were investigated by the nitrogen adsorption and desorption isotherm measurement technique, X-ray di raction analysis and photoluminescence spectra, respectively. Reaction rates from photocatalytic removal of dichloromethane over Degussa P-25 TiO2 and Pt/TiO2 were evaluated. The average diameter and BET surface area of the TiO2 catalyst particles were 300 nm and 50 m2/g, respectively. The degradation e ciency was 99.0%, 82.7%, 55.2%, and 57.9% with TiO2 at inlet concentrations of 50, 100, 200, and 300 ppm, respectively. And the degradation e ciency was 99.3%, 79.7%, 76.5%, and 73.4% with a 0.005 wt.% Pt/TiO2 at inlet concentrations of 50, 100, 200, and 300 ppm, respectively. In addition, we found that the photoluminescence emission peak intensities decreased with increases in the doping amount of Pt, which indicates that the irradiative recombination was weakened. Furthermore, the results showed that the UV/0.005 wt.% Pt/TiO2 process was capable of e ciently decomposing gaseous DCM in air.     

Removal of copper ions from aqueous solution by calcium alginate immobilized kaolin

Kaolin has been widely used as an adsorbent to remove heavy metal ions from aqueous solutions. However, the lower heavy metal adsorption capacity of kaolin limits its practical application. A novel environmental friendly material, calcium alginate immobilized kaolin (kaolin/CA), was prepared using a sol-gel method. The e ects of contact time, pH, adsorbent dose, and temperature on Cu2+ adsorption by kaolin/CA were investigated. The Langmuir isotherm was used to describe the experimental adsorption, the maximum Cu2+ adsorption capacity of the kaolin/CA reached up to 53.63 mg/g. The thermodynamic studies showed that the adsorption reaction was a spontaneous and endothermic process.     

Historical trends of heavy metal contamination and their sources in lacustrine sediment from Xijiu Lake, Taihu Lake Catchment, China

Concentrations of Cd, Cr, Cu, Pb, Zn and Hg in Xijiu Lake sediment from the Taihu Lake catchment, China, were analyzed. Their contamination state was investigated based on the geoaccumulation index and enrichment factors. Statistical analysis was used to differentiate the anthropogenic versus natural sources of heavy metals (HMs), and the anthropogenic accumulation fluxes were calculated to quantify anthropogenic contribution to HMs. The results indicated that the lake sediment had been heavily contaminated by Cd, enrichment of Zn and Hg was at a relatively high level, while that of Cu and Pb was in the lower-to-moderate level and Cr was in the low enrichment level. Sources of Cr in the sediment were mainly from natural inputs, while other metals, especially Cd, were predominantly derived from anthropogenic sources. In the past century, anthropogenic accumulation fluxes of Pb, Zn and Hg increased by 0.1-47.3 mg/(cm².yr), 2.4-398.1 mg/(cm².yr), and 3.7-110.3 ng/(m².yr), respectively, accounting for most inputs of HMs entering the sediment. The contamination state of HMs varied with industrial development of the catchment, which demonstrated that contamination started in the early 20th century, reached the maximal level between the mid-1970s and mid-1990s, and decreased a little after the implementation of constraints on high contamination industries, although the contamination of some HMs, such as Cd, Zn and Hg, is still at high levels.     

Preparation and microwave absorbing properties of the core-nanoshell composite absorbers with the magnetic fly-ash hollow cenosphere as core

Electromagnetic (EM) wave pollution has become the chief physical pollution for environment. The core-nanoshell composite absorbers with magnetic fly-ash hollow cenosphere as core and nanocrystalline magnetic material as shell were prepared by high-energy ball milling. The results of X-ray diffraction analysis (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM) and vector network analyzer (VNA) analysis indicated that perfect-crystalline nanomagnetic material coating was gotten with a particle size of 12 nm, being dried at 60°C for 2 hr and calcined at 400°C for 1 hr after ball milling. The exchange-coupling interaction happened between ferrite of cenosphere and soft magnet γ-Fe₂03 coating, it enhances magnetic loss of composite absorbers. In the frequency between 1 MHz and 1 GHz, the absorbing effectiveness of the core-nanoshell composite absorbers can achieve ?30 dB, it is better than single material and is consistent with requirements of the microwave absorbing material at the low-frequency absorption.     

湘中锑矿区土壤重金属锑的污染特征

文章研究调查了冷水江锡矿山锑矿区、桃江板溪锑矿区、桃江马迹塘锑矿区、桃江武潭锑矿区、安化符竹溪金锑矿区及安化渣滓溪锑矿区及周围土壤中锑的含量及形态分布.结果表明:各矿区土壤中总锑含量范嗣为185.6-2 081.3 mg/kg,大大超过了土壤中锑的背景值,表明各矿区土壤已被严重污染.采用Tessier逐级提取法对土壤中...     

燃煤电厂烟气氮氧化物排放控制技术发展现状

在广泛查阅文献的基础上,对近年来国内外已成功应用和正在研究开发的一些主要的燃煤烟气氮氧化物控制技术进行了介绍。结合我国目前脱硝行业整体水平和国家环保政策要求,对我国脱硝行业技术研发方向提出了建议。