Degradation of ethinyl estradiol by nitrifying activated sludge

Degradation of ethinyl estradiol (EE2) by nitrifying activated sludge was studied with micro-organisms grown in a reactor with feedback of sludge fed with only a mineral salts medium containing ammonium as the sole energy source. Ammonium was oxidised by this sludge at a rate of 50 mg NH4+ g(-1) DW h(-1). This activated sludge was also capable of degrading EE2 at a maximum rate of 1 microg g(-1) DW h(-1). Using sludge with an insignificant nitrifying capacity of 1 mg NH4+ g(-1) DW h(-1), no degradation of EE2 was detected. Oxidation of EE2 by nitrifying sludge resulted in the formation of hydrophilic compounds, which were not further identified. Most probably degradation by nitrifying sludge results in a loss of estrogenic activity, as hydroxylated derivatives of EE2 are known to have a substantially lower pharmacological activity than EE2.     

Removal of ammonia by biofilters: a study with flow-modified system and kinetics

The characteristics of ammonia removal by two types of biofilter (a standard biofilter with vertical gas flow and a modified biofilter with horizontal gas flow) were investigated. A mixture of organic materials such as compost, bark, and peat was used as the biofilter media based on the small-scale column test for media selection. Complete removal capacity, defined as the maximum inlet load of ammonia that was completely removed, was obtained. The modified biofilter showed complete removal up to 1.0 g N/kg dry material/day. However, the removal capacity of the standard biofilter started to deviate from complete removal around 0.4 g N/kg dry material/day, indicating that the modified biofilter system has higher removal efficiency than the standard upflow one. In kinetic analysis of the biological removal of ammonia in each biofilter system, the maximum removal rate, Vm, was 0.93 g N/kg dry material/day and the saturation constant, Ks, was 32.55 ppm in the standard biofilter. On the other hand, the values of Vm and Ks were 1.66 g N/kg dry material/day and 74.25 ppm, respectively, in the modified biofilter system.     

Disclosure of climate risk information by the world’s largest companies

The risks related to global climate change are seen as threats to companies, taking into consideration their impact on the return on investment. In order to mitigate climate risk and introduce new opportunities to financiers, companies need to identify, manage, and report climate risks. The purpose of this paper is to investigate the climate risks disclosed by the 100 largest companies in the world, according to the Bloomberg and Price Waterhouse Coopers (PwC 2015) classification, and identify some characteristics of these companies that explain the disclosure level of such information. Preliminary results revealed that of the companies investigated, 14% did not disclose any climate risk information in the Carbon Disclosure Program (CDP) report. Also, from the companies that disclosed information according to the Global Reporting Initiative (GRI), 9.9% did not provide information regarding policies, actions, and strategies for mitigating the risks related to climate change. The results shown by the content analysis suggested that, in general, there is still a low level of disclosure about climate risks by these companies. The final results through econometric instruments and statistical tests indicate that the size of the company or the fact that corporations are from developed countries do not necessarily explain the level of information disclosed. However, the activity sector, the continent, and the efficiency of the Board of Directors are factors that strongly explain the level of climate risk disclosure. We conclude that more effort is needed to encourage an engaging attitude from corporations to develop actions, policies, and strategies to mitigate climate change risks and threats. In addition, the world’s largest companies should make a greater investment in climate risk disclosure.     

The Adaptive Capacity Wheel: a method to assess the inherent characteristics of institutions to enable the adaptive capacity of society

Climate change potentially brings continuous and unpredictable changes in weather patterns. Consequently, it calls for institutions that promote the adaptive capacity of society and allow society to modify its institutions at a rate commensurate with the rate of environmental change. Institutions, traditionally conservative and reactive, will now have to support social actors to proactively respond through planned processes and deliberate steps, but also through cherishing and encouraging spontaneous and autonomous change, as well as allowing for institutional redesign. This paper addresses the question: How can the inherent characteristics of institutions to stimulate the capacity of society to adapt to climate change from local through to national level be assessed? On the basis of a literature review and several brainstorm sessions, this paper presents six dimensions: Variety, learning capacity, room for autonomous change, leadership, availability of resources and fair governance. These dimensions and their 22 criteria form the Adaptive Capacity Wheel. This wheel can help academics and social actors to assess if institutions stimulate the adaptive capacity of society to respond to climate change; and to focus on whether and how institutions need to be redesigned. This paper also briefly demonstrates the application of this Adaptive Capacity Wheel to different institutions.     

The adaptive capacity of institutions in the spatial planning,water, agriculture and nature sectors in the Netherlands

The climate change problem calls for a continuously responding society. This raises the question: Do our institutions allow and encourage society to continuously adapt to climate change? This paper uses the Adaptive Capacity Wheel (ACW) to assess the adaptive capacity of formal and informal institutions in four sectors in the Netherlands: spatial planning, water, agriculture and nature. Formal institutions are examined through an assessment of 11 key policy documents and informal institutions are analysed through four case studies covering each sector. Based on these ACW analyses, both sector-specific and more general strengths and weaknesses of the adaptive capacity of institutions in the Netherlands are identified. The paper concludes that the most important challenge for increasing institutional adaptive capacity lies in combining decentralized, participatory approaches with more top-down methods that generate leadership (visions, goals) standards, instruments, resources and monitoring.     

Standard purity and response factors of perfluorinated compounds

It has been reported that the relative response factors of isotopically labeled standards and unlabeled standards of the same perfluorinated compounds could be different. Individual (100 ng mL^?1) solutions of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) were analyzed using high-performance liquid chromatography tandem mass-spectrometry under negative-ion electrospray to detect any impurities present down to 0.5%–0.1% relative to the major component. Purity of the standards ranged from approximately 86% to ≥ 97%. Standard solutions of unlabeled and isotopically labeled materials were analyzed to compare the response factors of isotopically labeled analytes versus their nonlabeled counterparts in three different matrices at equivalent concentrations: organic solvent (methanol), serum extract, and water present individually and concurrently. Not all labeled analytes have the same response factor as their nonlabeled complement, and in at least one case the matrix in which the standard is present may cause significant suppression of response. Standard solutions of electrochemical fluorination produced PFOA and PFOS were quantified under multiple reaction monitoring mode, using calibration curves prepared from standards consisting primarily of linear standards only. The use of linear only standards may cause under-prediction of concentrations, and that the working range of these standards may be limited.     

Suppressing antagonistic bioengineering feedbacks doubles restoration success

In a seagrass restoration project, we explored the potential for enhancing the restoration process by excluding antagonistic engineering interactions (i.e., biomechanical warfare) between two ecosystem engineers: the bioturbating lugworm Arenicola marina and the sediment-stabilizing seagrass Zostera noltii Hornem. Applying a shell layer underneath half of our seagrass transplants successfully reduced adult lugworm density by over 80% and reduced lugworm-induced microtopography (a proxy for lugworm disturbance) at the wave-sheltered site. At the wave-exposed site adult lugworm densities and microtopography were already lower than at the sheltered site but were further reduced in the shell-treated units. Excluding lugworms and their bioengineering effects corresponded well with a strongly enhanced seagrass growth at the wave-sheltered site, which was absent at the exposed site. Enhanced seagrass growth in the present study was fully assigned to the removal of lugworms' negative engineering effects and not to any (indirect) evolving effects such as an altered biogeochemistry or sediment-stabilizing effects by the shell layer. The context-dependency implies that seagrass establishment at the exposed site is not constrained by negative ecosystem-engineering interactions only, but also by overriding physical stresses causing poor growth conditions. Present findings underline that, in addition to recent emphasis on considering positive (facilitating) interactions in ecological theory and practice, it is equally important to consider negative engineering interactions between ecosystem-engineering species. Removal of such negative interactions between ecosystem-engineering species can give a head start to the target species at the initial establishment phase, when positive engineering feedbacks by the target species on itself are still lacking. Though our study was carried out in a marine environment with variable levels of wave disturbance, similar principles may be expected to apply to other ecosystems that are inhabited by ecosystem engineers.     

An improved method of removal for high concentrations of NO by electro-scrubbing process

In the Ag(II)/Ag(I) redox mediator integrated scrubber system, NO reacts with the Ag(II) ions produced by the electrochemical oxidation of Ag(I) in an electrochemical cell present in the scrubbing solution (aqueous HNO₃ acid) to form NO₂. This NO₂ is then absorbed into the scrubbing solution and degraded to nitrate. Numerous experimental runs were carried out to evaluate the feasibility of the integrated system to treat industrial waste gases containing high NO_x levels. The results showed that the levels of NO and NO_x removal increased with increasing Ag(II) loading and contact time. Under optimized conditions, 93.5% and 73.3% of the NO and NO_x, respectively, were removed by a single stage gas scrubber with 1.62 g L^?1 Ag(II) operating at 25 °C and atmospheric pressure.     

Study on the removal of NOx from simulated flue gas using acidic NaClO2 solution

The study on the removal of NOx from simulated flue gas has been carded out in a lab-scale bubbling reactor using acidic solutions of sodium chlorite. Experiments were performed at various pH values and inlet NO concentrations in the absence or presence of SO2 gas at 45℃. The effect of SO2 on NO oxidation and NO2 absorption was critically examined. The oxidative ability of sodium chlorite was investigated at different pH values and it was found to be a better oxidant at a pH less than 4. In acidic medium, sodium chlorite decomposed into C102 gas, which is believed to participate in NO oxidation as well as in NO2 absorption. A plausible NOx removal mechanism using acidic sodium chlorite solution has been postulated. A maximum NOx removal efficiency of about 81% has been achieved.     

Development of a Local-Scale Spatially Refined Multimedia Fate Model (LSRMFM) for Urban-Scale Risk Assessment: Model Formulation, GIS-Based Preprocessing, and Case Study

A local-scale spatially refined multimedia fate model (LSRMFM) was developed to evaluate in detail the multimedia transport of organic compounds at a spatial level. The model was derived using a combination of an advection?Cdispersion?Creaction partial differential equation, a steady-state multimedia fugacity model, and a geographical information system. The model was applied to predicting four major volatile organic compounds that are produced as emissions (benzene, toluene, xylene, and styrene) in an urban and industrial area (the 50?×?50-km area was divided into 0.5?×?0.5-km segments) in Korea. To test the accuracy of the model, the LSRMFM was used to predict the extent of dispersion and the data compared with actual measured concentrations and the results of a generic multimedia fate model (GMFM). The results indicated that the method developed herein is appropriate for predicting long-term multimedia pollution. However, the comparison study also illustrated that the developed model has some limitations (e.g., steady-state assumption) in terms of explaining all the observed concentrations, and additional verification and study (e.g., validation using a large observed data set, integration with a more accurate runoff model) would be desirable. In comparing LSRMFM and GMFM, discrepancies between the LSRMFM and GMFM outputs were found, as the result of geographical effects, even though the environmental parameters were identical. The geographical variation for LSRMFM output indicated the existence of considerable local human and ecological risks, whereas the GMFM output indicated less average risk. These results demonstrate that the model has the potential for improving the management of pollutant levels under these refined spatial conditions.