HPLC-MS/MS in der Rückstandsanalytik von Pflanzenschutzmitteln

Goal and Scope

Increasing demands from the regulatory authorities of plant protection products for residue analytical methods on the one hand and the need for cost reduction by shorter development times on the other hand have led to a significant displacement of conventional methods (e.g. HPLC-UV or GC-MS) by HPLC-MS/MS with atmospheric pressure ionization (API) in residue analysis since the mid of the 1990s. This development started in the pharmaceutical industries where HPLC-MS/MS had already been used for the quantitation of drugs and their metabolites in plasma since the late 1980s.

Methods

The reason for the high acceptability of HPLC-MS/MS with electrospray ionisation (ESI) or chemical ionization at atmosheric pressure (APCI) compared with alternative methods are shown with respect to analytical quality parameters, compliance with international registration guidelines and economic reasons.

Results and Conclusion

HPLC-MS/MS is being applied for solving ca. 75% of all analytical problems occuring in modern residue analytical laboratories. This technique offers convincing advantages for the determination of plant protection products and their metabolites in various matrices. These are a reduced number of or no clean-up steps after extraction of the samples, high throughput besides high ruggedness, low limits of detection and a large linear measuring range. In addition, several analytes of various chemical classes can be determined within one chromatographic run. Due to the high selectivity there is only little need for additional confirmatory methods. For enforcement purposes HPLC-MS/MS is accepted by the European authorities since 2002. However, due to high costs for instrumentation and specially skilled personnel only few enforcement laboratories have invested into this technology, so far.

Recommendation and Perspective

The importance of HPLC-MS/MS in residue analysis will further increase, as new ionization techniques will enable the analysis of more analytes and as the investment costs will decrease in the future. However, proven conventional methods will still survive in some cases. New concepts, such as parallel HPLC-MS/MS or on-line purification of extracts by column switching which are already widely used in the pharmaceutical industry could help to further increase the throughput. However, for a sound evaluation with respect to their applicability in residue analysis there is so far too little experience.     

Biodegradation potential of cyano-based ionic liquid anions in a culture of Cupriavidus spp. and their in vitro enzymatic hydrolysis by nitrile hydratase

Biodegradation tests with bacteria from activated sludge revealed the probable persistence of cyano-based ionic liquid anions when these leave waste water treatment plants. A possible biological treatment using bacteria capable of biodegrading similar compounds, namely cyanide and cyano-complexes, was therefore examined. With these bacteria from the genera Cupriavidus, the ionic liquid anions B(CN)₄ ^?, C(CN)₃ ^?, N(CN)₂ ^? combined with alkaline cations were tested in different growth media using ion chromatography for the examination of their primary biodegradability. However, no enhanced biodegradability of the tested cyano-based ionic liquids was observed. Therefore, an in vitro enzymatic hydrolysis test was additionally run showing that all tested ionic liquid (IL) anions can be hydrolysed to their corresponding amides by nitrile hydratase, but not by nitrilase under the experimental conditions. The biological stability of the cyano-based anions is an advantage in technological application, but the occurrence of enzymes that are able to hydrolyse the parent compound gives a new perspective on future cyano-based IL anion treatment.     

Limit of safety against flame transmission for sintered metal flame arrester elements in the case of flashback in fuel gas/oxygen mixtures

In autogenous welding, cutting and allied processes, so-called dry safety devices are used to protect the outlet terminals of gas distribution lines. To prevent flame transmission, these units are fitted with sintered metal flame arrester elements. At the Federal Institute for Materials Research and Testing (BAM), extensive investigations have been carried out with an experimental flame arrester to determine the limits of safety against flame transmission for sintered metal flame arrester elements in the case of flashback in fuel gas/oxygen mixtures. On the basis of the results of these investigations, it is possible to estimate the pore sizes up to which a sintered metal element can prevent any flame transmission with a given fuel gas.     

N2O emissions from agricultural soils in the North China Plain:the effect of chemical nitrogen fertilizer and organic manure

ＩｎｔｒｏｄｕｃｔｉｏｎＮｉｔｒｏｕｓｏｘｉｄｅ (Ｎ2 Ｏ)ｉｓａｖｅｒｙｉｍｐｏｒｔａｎｔｇｒｅｅｎｈｏｕｓｅｇａｓｉｎｔｈｅａｔｍｏｓｐｈｅｒｅ.ＩｎｔｅｒｅｓｔｉｎｔｈｅｉｎｃｒｅａｓｅｏｆａｔｍｏｓｐｈｅｒｉｃＮ2 ＯｈａｓｂｅｅｎｒｅｃｅｎｔｌｙｓｔｉｍｕｌａｔｅｄｂｙｔｈｅｕｎｄｅｒｓｔａｎｄｉｎｇｔｈａｔＮ2 Ｏｇａｓｐｌａｙｓａｎｉｍｐｏｒｔａｎｔｒｏｌｅｉｎｔｈｅｃｈｅｍｉｓｔｒｙａｎｄｏｚｏｎｅｌａｙｅｒｄｅｓｔｒｕｃｔｉｏｎｏｆｔｈｅｓｔｒａｔｏｓｐｈｅｒｅ.Ｔｈｅｒａｄｉａｔｉｖ…     

Degradation of poly(3-hydroxybutyrate), PHB,by bacteria and purification of a novel PHB depolymerase fromComamonas sp.

Bacteria capable of growing on poly(3-hydroxybutyrate), PHB, as the sole source of carbon and energy were isolated from various soils, lake water, activated sludge, and air. Although all bacteria utilized a wide variety of monomeric substrates for growth, most of the strains were restricted to degrade PHB and copolymers of 3-hydroxybutyrate and 3-hydroxyvalerate, P(3HB-co-3HV). Five strains were also able to decompose a homopolymer of 3-hydroxyvalerate, PHV. Poly(3-hydroxyoctanoate), PHO, was not degraded by any of the isolates. One strain, which was identified asComamonas sp., was selected, and the extracellular depolymerase of this strain was purified from the medium by ammonium sulfate precipitation and by chromatography on DEAE-Sephacel and Butyl-Sepharose 4B. The purified PHB depolymerase was not a glycoprotein. The relative molecular masses of the native enzyme and of the subunits were 45,000 or 44,000, respectively. The purified enzyme hydrolyzed PHB, P(3HB-co-3HV), and—at a very low rate—also PHV. Polyhydroxyalkanoates, PHA, with six or more carbon atoms per monomer or characteristic substrates for lipases were not hydrolyzed. In contrast to the PHB depolymerases ofPseudomonas lemoignei andAlcaligenes faecalis T₁, which are sensitive toward phenylmethylsulfonyl fluoride (PMSF) and which hydrolyze PHB mainly to the dimeric and trimeric esters of 3-hydroxybutyrate, the depolymerase ofComamonas sp. was insensitive toward PMSF and hydrolyzed PHB to monomeric 3-hydroxybutyrate indicating a different mechanism of PHB hydrolysis. Furthermore, the pH optimum of the reaction catalyzed by the depolymerase ofComamonas sp. was in the alkaline range at 9.4.     

CDM Projects under the Kyoto Protocol: A Methodology for Sustainability Assessment – Experiences from South Africa and Uruguay

Under the Clean Development Mechanism (CDM) of the Kyoto Protocol, industrialised countries may finance greenhouse gases mitigation projects in developing countries. The Kyoto Protocol explicitly requires that the CDM shall assist developing countries to achieve sustainable development. However, a clear definition of sustainability for CDM projects is still debatable. MATA-CDM (Multi-Attributive Assessment of CDM Projects) is an approach that facilitates a quantitative assessment of potential projects regarding their contribution to sustainable development. This paper presents applications of MATA-CDM in two different countries. In South Africa, the application was done mainly for academic and demonstrative purposes, whereas in Uruguay it was implemented together with the responsible Designated National Authority (DNA). The work in both countries included the selection of sustainability criteria and measurable indicators. Experts weighted the criteria using personal interviews and a multi-stakeholder workshop. This method was applied to three potential CDM projects in South Africa and one in Uruguay. Results show that under the conditions of this study, the MATA-CDM approach yet fails to yield a perfect quantitative overall sustainability assessment of CDM projects but that several findings could be useful to further develop the approach with the aim to translate the vague term sustainable development to a mainstream project level. Valuable experience was in particular collected with different stakeholder processes to perform criteria weighting.