Effect of Sequential Mixing and Compounding Conditions on Cellulose Acetate/Layered Silicate Nanocomposites

Injection molded nanocomposites have been successfully fabricated from cellulose acetate (CA), eco-friendly triethyl citrate (TEC) plasticizer, and organically modified clay with and without maleic anhydride grafted cellulose acetate butyrate (CAB-g-MA) as a compatibilizer. The effects of processing conditions such as mixing methods, pre-plasticizing times, extruder retention times (RT) and addition of compatibilizer on the performance of these nanocomposites have been evaluated. The cellulosic plastic with CA/TEC (80/20 wt%) was used as the polymer matrix for nanocomposite fabrication. The morphologies of these nanocomposites were evaluated through X-ray diffraction (XRD) and transmission electron microscopy (TEM) studies. The mechanical properties of the nanocomposites were measured and have been correlated with the XRD and TEM observations. From all of the sequential mixing methods used, powder–powder mixing leads to the most transparent nanocomposites. Cellulosic plastic-based nanocomposites obtained using increased pre-plasticizing times and RT showed better exfoliated structures. In the system containing compatibilizer, the minimum retention time required for obtaining almost completely exfoliated hybrid nanocomposites was shorter than in the system without compatibilizer.     

IMPACTS OF AGRICULTURAL DRAINAGE WELL CLOSURE ON CROP PRODUCTION: A WATERSHED CASE STUDY1

ABSTRACT: Much of north-central Iowa is characterized by flat topography, shallow depressions, and poor natural surface drainage. Land drainage systems comprising of tile drains and agricultural drainage wells (ADWs) are used as outlets for subsurface drainage of cropland under corn and soybean production. Studies have shown that these drainage systems, mainly the ADWs, are potential routes for agricultural chemicals to underground aquifers. To protect the region's vital groundwater resource, researchers are evaluating alternative outlets ranging from complete closure of existing ADWs (and creation of wetlands) to continued use of ADWs and chemical management in a comprehensive policy framework. This paper presents the results of a study designed to provide government jurisdictions, farmers, and land managers information for assessing the impact of closing ADWs on crop production. The study couples a geographic information systems database for a 471-hectare watershed in Humboldt County, Iowa, with a groundwater flow model (MODFLOW) and an empirical crop yield loss model to predict long-term effects of complete closure of ADWs on crop production. The cropland areas inundated and the relative crop yield loss due to ADW closure are determined as a function of long-term climatic data. The results indicate that elimination of drainage outlets in the watershed could result in ponding of low-lying areas and poorly drained soils, making them unsuitable for crop production. Such wetness also decreases the efficiency of production in the no-ponding areas by isolating fields, and the crop yield loss can be reduced by an annual average of about 18 percent.     

Enumeration of methanogens with a focus on fluorescence in situ hybridization

Methanogens, the members of domain Archaea are potent contributors in global warming. Being confined to the strict anaerobic environment, their direct cultivation as pure culture is quite difficult. Therefore, a range of culture-independent methods have been developed to investigate their numbers, substrate uptake patterns, and identification in complex microbial communities. Unlike other approaches, fluorescence in situ hybridization (FISH) is not only used for faster quantification and accurate identification but also to reveal the physiological properties and spatiotemporal dynamics of methanogens in their natural environment. Aside from the methodological aspects and application of FISH, this review also focuses on culture-dependent and -independent techniques employed in enumerating methanogens along with associated problems. In addition, the combination of FISH with micro-autoradiography that could also be an important tool in investigating the activities of methanogens is also discussed.     

Effect of waterborne boron and molybdenum on survival,growth and feed intake of Indian major carp,Cirrhinus mrigala (Hamilton)

The effect of either boron (B) or molybdenum (Mo) on survival, growth and feed intake of Indian major carp, Cirrhinus mrigala (Hamilton), advanced fry was studied in two separate experiments. Survival rates of C. mrigala fry (2.78±0.14 g) following 50 days’ exposure to B at 0.01 (control), 0.5, 1.0, 2.0, 4.0 and 8.0 mg·L ^?1 were 100% at all concentrations except 8.0 mg·L ^?1 where the survival rate 87.5±7.5%. We observed 100% survival of mrigala fry at all concentrations of Mo, 0.02 (control), 0.5, 1.0, 2.0, 4.0 and 8.0 mg·L ^?1. Both B and Mo at 0.5 mg·L ^?1 showed significantly (p<0.05) higher growth of the fish compared with control and other concentrations. B exposure at 1.0, 2.0 and 4.0 mg·L ^?1 had no significant effect on growth rate, whereas at 8.0 mg B·L ^?1 growth of the fish almost ceased. Mo exposure at 1.0, 2.0, 4.0 and 8.0 mg·L ^?1 caused no significant effect on growth rate of the fish compared to control. Both B and Mo at all concentrations had no significant effect on feed intake of the fish compared with control, except at the highest concentration of boron (8.0 mg·L ^?1).     

Biodegradable Nanocomposites of Poly(butylene adipate-co-terephthalate) (PBAT) and Organically Modified Layered Silicates

The present article summarizes the development of poly(butylene adipate-co-terephthalate) (PBAT) and organically modified layered silicates nanocomposite using a co-rotating twin screw extruder having a blown film unit. Wide angle X-ray diffraction (WAXD) studies indicated an increase in d spacing of the nanoclays in the bio-nanocomposite hybrids revealing formation of intercalated morphology. Transmission Electron Microscopy (TEM) also confirmed presence of partially exfoliated clay galleries as well as layers of intercalated structures within the PBAT matrix in the nanocomposite. Mechanical tests showed that the nanocomposite hybrids prepared using B109 nanoclay exhibited higher tensile modulus. Functionalization of PBAT matrix upon grafting with maleic anhydride (MA) resulted in further improvement in mechanical properties. The existence of interfacial bonds in grafted bio-nanocomposite hybrids are substantiated using FTIR spectroscopy. Thermal properties of nanocomposite hybrids employing DSC, TGA also revealed improved T_g, T_c and thermal stability over the virgin polymer. Dynamic Mechanical Analysis (DMA) indicated an increase of storage modulus (E′) of PBAT biopolymer with incorporation of nanofiller. The biodegradability of PBAT bionanocomposite hybrids showed an increase in the rate of biodegradability with addition of Na⁺MMT due to hydrophilic nature of the nanoclay.     

Processability and Biodegradability Evaluation of Composites from Poly(butylene succinate) (PBS) Bioplastic and Biofuel Co-products from Ontario

This study investigates the processability and biodegradability of composite bioplastic materials. Biocomposites were processed using twin-screw compounding of the bioplastic poly(butylene succinate) (PBS) with bio-based fillers derived from co-products of biofuel production. An extensive biodegradability evaluation was conducted on each biocomposite material, as well as the base materials, using respirometric testing to analyze the conversion of organic carbon into carbon dioxide. This evaluation revealed that the presence of meal-based fillers in the biocomposites increased the rate of biodegradation of the matrix polymer, degrading at a faster pace than both the pure PBS polymer and the switchgrass (SG) composite. This degradation was further confirmed using FT-IR and thermal analysis of the material structure before and after biodegradation. The increased biodegradation rate is attributed to the high concentration of proteins in the meal-based composites, which enhanced the hydrolytic biodegradation of the material and facilitated micro-organism growth. The SG-based composite degraded slower than the pure polymer due to its lignin content, which degrades via a different mechanism than the polymer, and slowed the biodegradation process.     

Study of Thermo-Mechanical and Morphological Behaviour of Biodegradable PLA/PBAT/Layered Silicate Blend Nanocomposites

Poly (lactic acid) (PLA) and poly (butylene adipate-co-terephthalate) (PBAT) blend nanocomposites were prepared using melt blending technique followed by compression moulding. The blend nanocomposites were prepared with a variation of PBAT loading along with maleic anhydride and benzoyl peroxide ranging from 5 to 20 wt% along with two different commercially available nanoclays cloisite 93A and cloisite 30B (C30B) at 3 wt% loading. The maleic anhydride and benzoyl peroxide were used during the melt blending of the blend nanocomposites as a compatibilizer and as an accelerator respectively. Maleic anhydride used to enhance the compatibility of the PLA/PBAT blend and as well as the uniform adhesion of the nanoclays with them. The properties and characterizations of PLA matrix and the PLA/PBAT blend nanocomposites have been studied. The tensile strength, % elongation and impact strength increased with the preparation of PLA/PBAT blend nanocomposites as compared with PLA matrix. PLA/PBAT/C30B blend nanocomposites exhibited optimum tensile strength at 15 wt% of PBAT loading. Differential scanning calorimetry and thermogravimetric analysis also showed improved thermal properties as compared with virgin PLA. The wide angle X-ray diffraction studies indicated an increase in d-spacing in PLA/PBAT/C30B blend nanocomposite thus revealing intercalated morphology.     

Phosphorus speciation in the marine sediment of Kalpakkam coast,southeast coast of India

A study was carried out at Kalpakkam coast to find out the distribution of various fractions of phosphorus (P) in the marine sediment during pre-northeast monsoon period. Samples were collected from ten locations covering ~80 km² of the inner-shelf region. Sedimentary parameters such as sand, silt, clay, and organic carbon percentage were analyzed in order to find out their relation with various P fractions. The sediment was found to be predominantly sandy in nature with low silt and clay content. Among all the fractions (loosely bound (LoP), calcium bound (CaP), iron bound (FeP), aluminum bound (AlP), and organic (OP)), CaP fraction constituted the largest portion (68.7 %) followed by organic fraction (16.3 %). The bioavailable P fractions ranged from 5 to 44 % of the total P (TP) content. Relatively high LoP content was observed at the offshore locations with comparatively high mud percentage as compared with the near-shore locations. As FeP and AlP concentrations were directly proportional to the amount of fine-grain sediment, the low levels of these fractions found in this coastal area were therefore attributed to the sandy nature of the sediments. The order of abundance of the major forms of P in the surface sediments of Kalpakkam coast was as follows: CaP?>?OP?>?LoP?>?AlP?>?FeP.     

Benefits of the development and dissemination of climate-smart rice: <Emphasis Type="Italic">ex ante</Emphasis> impact assessment of drought-tolerant rice in South Asia

In the era of climate change, rice (Oryza sativa L.) production is increasingly affected by the rising frequency and severity of various abiotic stresses such as flood and drought. In some cases, 100 % yield loss can be attributed solely to these stresses. Hence, there is an urgent need to develop climate-smart rice that is more resilient to abiotic stresses. As the development and dissemination of climate-smart rice varieties entail costs, this article examines the net economic benefits of developing and disseminating successful drought-tolerant rice in South Asia where rice area prone to drought far outweighs area with other abiotic stresses. Drought causes major rice yield losses not only in South Asia but also in other parts of Asia and Africa. Using the ORYZA2000 (ORYZA model series were developed at the International Rice Research Institute (IRRI) in the early 1990s in collaboration with Wageningen University and Research Centre (WUR) and 16 national agricultural research and extension systems in Asia. ORYZA2000 is an update and integration of earlier versions of the ORYZA model. More detailed documentation of ORYZA2000 can be found in (http://books.irri.org/9712201716_content.pdf)) crop growth simulation model, we demonstrate that a successful drought-tolerant rice variety can provide yield gains in South Asia of a minimum of 1.71 % to a maximum of 8.96 % when there is no change in the climate and under different climate scenarios projected by Canadian General Circulation Models (CGCMs). Moreover, our economic analysis shows that the economic benefits from the successful development and dissemination of droughttolerant rice more than outweigh the research investments needed to develop a variety. Although the research, development, and dissemination of a climate-smart drought-tolerant rice variety in the South require USD 84 million, our economic model indicates that rice production will be higher by a minimum of 6 million tons worth USD 3.3 billion, and rice prices will be lower by a minimum of USD 72 per ton when a drought-tolerant variety is adopted in South Asia (as compared to the case without this new variety). This can lead to improved rice food security and better nutritional outcomes for the poor.