Injection-Molded Bioblends from Lignin and Biodegradable Polymers: Processing and Performance Evaluation

This paper investigates the effects of the incorporation of lignin and small quantities of epoxidized natural rubber (ENR) as an impact modifying agent on blends of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and poly(ε-caprolactone) (PCL). The addition of lignin resulted in a slight improvement of flexural strength and modulus of the ternary blending system. Incorporation of ENR into the blend resulted in an increase in notched Izod impact strength from 40 to 135% depending on the concentration of ENR. The addition of lignin into the blend resulted in an improvement of thermal stability of the ternary blend system. Morphological analysis showed a good dispersion of PHBV phases and lignin within the PCL matrix. Rheological characterization revealed that the presence of lignin resulted in increased storage modulus of the bioblend.     

Improvement of Impact Toughness of Biodegradable Poly(butylene succinate) by Melt Blending with Sustainable Biobased Glycerol Elastomers

Poly(butylene succinate) (PBS) was melt blended with glycerol based polyesters (PGS) synthesized from pure and technical glycerol aiming to improve the impact strength of PBS. It was found that after addition of 30 wt% PGS to PBS its impact strength was significantly increased by 344% (from 31.9 to 110 J/m) and its elongation at break was maintained at 220%. Infrared spectra of the blends showed the presence of hydroxyl groups from the PGS phase suggesting that hydrogen bonding between the phases could be responsible for a good stress transfer and an efficient toughening in the PBS/PGS blends. Scanning electron microscopy imaging showed a good dispersion of PGS phase into PBS with a PGS particle size of 10 μm and less and no agglomeration. Addition of PGS to PBS was shown to be an effective strategy for improvement of PBS impact resistance without serious detrimental effects on its thermal and rheological properties.     

Effect of Humic Acid on the Bioavailability of γ-Hexachlorocyclohexane in Marsilea Minuta (L.)

Effect of various concentrations of humic acid (0.2 to 1%) on thebioavailability of -HCH in vegetative clones of theaquatic fern Marsilea minuta was studied in a staticexperimental bioassay system on different photoperiods. Additionof humic acid showed the reduction in the bioavailability of-HCH in all the photoperiods (72 hr light to 144 hrlight) at the interval of 16 hr light (L) and 8 hr dark (D) inboth aerial and submerged portion as compared to controlindicating its protective role in toxicity.     

Risk assessment of water pollutants

The sources of toxic xenobiotics and different factors such as ecological diversity, differences in comparative anatomy, physiology and biochemistry, food chain variation, interrelationship within species and life span, etc., are considered during risk assessment of pollutants, and their impact on aquatic ecotoxicology is identified. A fugacity and multimedia compartment model is suggested, based on toxicodynamic (toxicity of the chemical) and toxicokinetic (metabolism of the chemical) considerations to predict and screen the behaviour of pollutants quantitatively in the aquatic environment. The significance of the risk analysis approach in anticipatory actions and regulation of pollution levels is discussed.     

Laboratory and Field Evaluation of Measurement Methods for One-Hour Exposures to O3, PM25, and CO

ABSTRACT

While researchers have linked acute (less than 12-hr) ambient O₃, PM₂₅, and CO concentrations to a variety of adverse health effects, few studies have characterized short-term exposures to these air pollutants, in part due to the lack of sensitive, accurate, and precise sampling technologies. In this paper, we present results from the laboratory and field evaluation of several new (or modified) samplers used in the “roll-around” system (RAS), which was developed to measure 1-hr O₃, PM₂₅, and CO exposures simultaneously. All the field evaluation data were collected during two sampling seasons: the summer of 1998 and the winter of 1999.

To measure 1-hr O₃ exposures, a new active O₃ sampler was developed that uses two nitrite-coated filters to measure O₃ concentrations. Laboratory chamber tests found that the active O₃ sampler performed extremely well, with a collection efficiency of 0.96 that did not vary with temperature or relative humidity (RH). In field collocation comparisons with a reference UV photometric monitor, the active O₃ sampler had an effective collection efficiency ranging between 0.92 and 0.96 and a precision for 1-hr measurements ranging between 4 and 6 parts per billion (ppb). The limits of detection (LOD) of this method were 9 ppb-hr for the chamber tests and ~16 ppb-hr for the field comparison tests.

PM_2.5 and CO concentrations were measured using modified continuous monitors—the DustTrak and the Langan, respectively. A size-selective inlet and a Nafion dryer were placed upstream of the DustTrak inlet to remove particles with aerodynamic diameters greater than 2.5 um and to dry particles prior to the measurements, respectively. During the field validation tests, the DustTrak consistently reported higher PM_2.5 concentrations than those obtained by the collocated 12-hr PM_{2 5} PEM samples, by approximately a factor of 2. After the DustTrak response was corrected (correction factor of 2.07 in the summer and 2.02 in the winter), measurements obtained using these methods agreed well with R² values of 0.87 in the summer and 0.81 in the winter. The results showed that the DustTrak can be used along with integrated measurements to measure the temporal and spatial variation in PM_{2 5} exposures. Finally, during the field validation tests, CO concentrations measured using the Langan were strongly correlated with those obtained using the reference method when the CO levels were above the LOD of the instrument [~1 part per million (ppm)].     

Effects of soil amendments on the bioavailability of heavy metals from zinc mine tailings

A study was conducted to test the effects of soil amendments on the bioavailability of heavy metals in a zinc mine tailings containing soil to plants, using the Indian mustard plant (Brassica juncea) as a test organism. Zinc mine tailing containing soil was amended with humus soil (HS) and phosphatic clay (PC). The zinc mine tailing containing soil (ZMTS) was characterized for heavy metals. It was mixed with PC and HS, and four mixtures were prepared. The first mixture contained ZMTS, and served as a control. The second mixture contained ZMTS and PC in the ratio of 1:1 (w/w). The third mixture contained ZMTS and HS in the ratio of 1:1(w/w). The fourth mixture containing ZMTS, PC and HS in the ratio of (2:1:1) (w/w). A slight increase in the bioavailability of Pb, Cu, Zn and Mn was noticed with increase in the incubation time from 14 to 42 days. The bioavailability of Pb, Cu, Zn and Mn from ZMTS alone in Brassica plant was in the range of 94-99% up to 42 days. Addition of PC and HS to the ZMTS soil reduced the bioavailabilities of Pb by (15%), of Cu by (20%), of Zn by (20%) and of Mn by (25%) in the mustard plant. The data showed that PC in the presence of HS had a high affinity for the heavy metals in the order of Pb, Cu, Zn and Mn.     

Thermodynamics of interaction of lindane on silty loam and silty clay loam Indian soils

Abstract

Interaction of lindane with silty loam and silty clay loam soils was studied in batch tests at 23, 30 and 37° C. Sorption experiments were carried out at four concentrations and for varying time of contact upto 72 hours. This was followed by desorption studies. No desorption was observed. The sorption data was analysed using sorption equations and evaluating the thermodynamic parameters. The sorption was found to be predominantly entropic in nature and a combined effect of adsorption and chemisorption. The effect of organic matter and other chemical and mineralogical constituents of soils has also been discussed. The sorption with single application of lindane with the two soil types indicates that the insecticide is less likely to reach groundwater.     

Assessment of industrial effluent and its impact on soil and plants

The present study deals with the assessment of industrial water of an electronic component manufacturing unit with electroplating and its subsequent effects on soil and plants receiving the effluent. The physico-chemical parameters of the effluent samples showed higher value than that of ground water. The treated effluent was within the permissible limit. Microtox test was conducted and determined the degree of toxicity of untreated, treated effluents as well as the water sample collected at effluent discharge point of receiving river (confluence point). The physico- mechanical parameters of the soil samples were not changed due to irrigation of the treated effluent, but the concentration of metals were comparatively higher than the control soil. Higher accumulation of metals was found in the plant parts in naturally growing weeds and cultivated crop plant irrigated with treated effluent. Elevated accumulation of metals in Eichhornia crassipes and Marsilea sp. growing along the effluent channel has been identified as a potential source of biomonitoring of metals particularly for Cu and Ca and can be utilised for the removal of heavy metal from wastewater.     

Formation of Soluble Complexes of Metals with Humic Acid and Its Environmental Significance

In order to investigate the role of functional groups present in humic acid(s) (HA) during complex formation, water soluble complexes between HA isolated from soil and metals (Pb, Ca, As, Ni, Cr, Co, Cu, Cd, Fe, Mn, Mg and Zn) were prepared and subjected to infrared (IR) spectroscopy. the IR data revealed the involvement of the - OH group of humic acid in complex formation with all metals except copper and arsenic, whereas the - COOH group of HA was found to be the preferred site of binding for all the metals. the significance of findings in relation to detoxification of environmental pollutants is discussed in this paper.     

Current knowledge of prenatal diagnosis of mosaic autosomal trisomy in amniocytes: karyotype/phenotype correlations

Genetic counseling for prenatal diagnosis of autosomal trisomy is complex because of the uncertainty of outcome, which is important for management decisions. Compilation of cases of prenatally diagnosed autosomal trisomies in amniocytes has been done previously in an attempt to elucidate the clinical phenotype of these pregnancies. It has been greater than a decade since these studies were completed. To update this work, we reviewed cases reported in the literature since that time. These cases are correlated with the prior reports to increase knowledge about outcomes and to hopefully improve the data available for genetic counseling. The risk of abnormal outcome can be summarized as: very high risk (>60%) for 47,+2/46; 47,+9/46; 47,+16/46; 47,+20/46; and 47,+22/46; high risk (40–59%) for 47,+5/46; 47,+14/46; and 47,+15/46; moderately high risk (20–39%) for 47,+7/46 47,+12/46; and 47,+17/46; moderate risk (up to 19%) for 47,+6/46 and 47,+8/46, and none were low risk. 47,+6/46 was originally indeterminate, 47,+7/46 was originally moderate risk, 47,+9/46 was originally high risk, and 47,+17/46 was originally low risk. © 2015 John Wiley & Sons, Ltd.