Contribution of primary and secondary sources to organic aerosol and PM2.5 at SEARCH network sites

Chemical tracer methods for determining contributions to primary organic aerosol (POA) are fairly well established, whereas similar techniques for secondary organic aerosol (SOA), inherently complicated by time-dependent atmospheric processes, are only beginning to be studied. Laboratory chamber experiments provide insights into the precursors of SOA, but field data must be used to test the approaches. This study investigates primary and secondary sources of organic carbon (OC) and determines their mass contribution to particulate matter 2.5 microm or less in aerodynamic diameter (PM2.5) in Southeastern Aerosol Research and Characterization (SEARCH) network samples. Filter samples were taken during 20 24-hr periods between May and August 2005 at SEARCH sites in Atlanta, GA (JST); Birmingham, AL (BHM); Centerville, AL (CTR); and Pensacola, FL (PNS) and analyzed for organic tracers by gas chromatography-mass spectrometry. Contribution to primary OC was made using a chemical mass balance method and to secondary OC using a mass fraction method. Aerosol masses were reconstructed from the contributions of POA, SOA, elemental carbon, inorganic ions (sulfate [SO4(2-)], nitrate [NO3-], ammonium [NH4+]), metals, and metal oxides and compared with the measured PM2.5. From the analysis, OC contributions from seven primary sources and four secondary sources were determined. The major primary sources of carbon were from wood combustion, diesel and gasoline exhaust, and meat cooking; major secondary sources were from isoprene and monoterpenes with minor contributions from toluene and beta-caryophyllene SOA. Mass concentrations at the four sites were determined using source-specific organic mass (OM)-to-OC ratios and gave values in the range of 12-42 microg m(-3). Reconstructed masses at three of the sites (JST, CTR, PNS) ranged from 87 to 91% of the measured PM2.5 mass. The reconstructed mass at the BHM site exceeded the measured mass by approximately 25%. The difference between the reconstructed and measured PM2.5 mass for nonindustrial areas is consistent with not including aerosol liquid water or other sources of organic aerosol.     

A passive sampler for ambient gaseous oxidized mercury concentrations

This paper reports on the development of a passive sampler for estimating gaseous oxidized mercury concentrations. Atmospheric gaseous oxidized mercury concentrations calculated from passive sampler data were correlated with those obtained using an automated analyzer (r² = 0.71, p < 0.01, n = 110 for one-week deployments; r² = 0.89, p < 0.01, n = 22 for two-week deployments). Sampler uptake was not significantly affected by changes in temperature, humidity, or ozone concentration, but it was slightly dependent on wind speed. As such, an equation for correcting data due to this factor was developed based on wind tunnel and field data. The detection limit for a two-week sampler deployment was ～5 pg m^?3. Field data collected in Nevada and the southeastern United States showed these samplers are useful for investigating spatial and temporal variability in gaseous oxidized mercury concentrations.     

Assessment and monitoring tools for aerobic bioremediation of vinyl chloride in groundwater

Direct aerobic biodegradation of vinyl chloride (VC) offers a remedial solution for persistent vinyl chloride plumes that are not amenable to the anaerobic process of reductive dechlorination because of either prevailing geochemical conditions or the absence of active Dehalococcoides ethenogenes. However, tools are needed to evaluate and optimize aerobic VC bioremediation. This article describes the development and testing of two techniques—a microbiological tool and a molecular tool—for this purpose. Both methods are based on detection of bacteria that can use vinyl chloride and ethene as growth substrates in the presence of oxygen. The microbiological tool is an activity assay that indicates whether bacteria capable of degrading ethene under aerobic conditions are present in a groundwater sample. This activity assay gave positive results in the area of active VC degradation of an aerobic VC bioremediation test site. A rapid semiquantitative genetic assay was also developed. This molecular tool, based on polymerase chain reaction (PCR) detection of a gene involved in the metabolism of both ethene and VC, revealed the presence of potential VC degraders in an enrichment culture and site groundwater. These tools could provide a basis for judging the potential of aerobic VC degradation by ethenotrophs at other sites in addition to offering a mechanism for treatment monitoring and system optimization. © 2009 Wiley Periodicals, Inc.     

Characterization of shredded television scrap and implications for materials recovery

Characterization of TV scrap was carried out by using a variety of methods, such as chemical analysis, particle size and shape analysis, liberation degree analysis, thermogravimetric analysis, sink-float test, and IR spectrometry. A comparison of TV scrap, personal computer scrap, and printed circuit board scrap shows that the content of non-ferrous metals and precious metals in TV scrap is much lower than that in personal computer scrap or printed circuit board scrap. It is expected that recycling of TV scrap will not be cost-effective by utilizing conventional manual disassembly. The result of particle shape analysis indicates that the non-ferrous metal particles in TV scrap formed as a variety of shapes; it is much more heterogeneous than that of plastics and printed circuit boards. Furthermore, the separability of TV scrap using density-based techniques was evaluated by the sink-float test. The result demonstrates that a high recovery of copper could be obtained by using an effective gravity separation process. Identification of plastics shows that the major plastic in TV scrap is high impact polystyrene. Gravity separation of plastics may encounter some challenges in separation of plastics from TV scrap because of specific density variations.     

Evaluating landfill disposal of chromated copper arsenate (CCA) treated wood and potential effects on groundwater: evidence from Florida

Chromated copper arsenate (CCA) treated wood has been used for more than 50 years. Recent attention has been focused on appropriate disposal of CCA-treated wood when its service life ends. Groups in the US and Europe concerned with the possibility of arsenic migration to groundwater from disposed CCA-treated wood have proposed that consumers be required to dispose of the wood as a hazardous waste, in the most protective of landfills. We examined available data for evidence of arsenic migration from unlined construction and demolition (C&D) debris landfills in Florida, where CCA-treated wood is disposed. Florida was chosen because soil, groundwater, landfill design, weather, and levels of CCA-treated wood use make the state a uniquely sensitive indicator for observing arsenic migration from CCA-treated wood disposal sites, should it occur. We developed and quality-checked a CCA-treated wood disposal model to estimate the amount of wood and associated arsenic disposed. By 2000, an estimated 13 million kg of arsenic in CCA-treated wood was disposed in Florida; however, groundwater monitoring data do not indicate that arsenic is migrating from unlined C&D landfills. Our results provide evidence that highly stringent regulation of CCA-treated wood disposal, such as treatment as a hazardous waste, is unnecessary.     

Reactive transport of uranium(VI) and phosphate in a goethite-coated sand column: an experimental study

The migration of uranium(VI) in subsurface environments is strongly influenced by its adsorption/desorption reactions at the solid/solution interface. Phosphate is often present in subsurface systems and was shown to significantly affect U(VI) adsorption in previous batch experiments. In this study, column experiments were conducted to investigate the effects of phosphate on U(VI) adsorption and transport under flow conditions. The adsorption of U(VI) and phosphate was very low on pure quartz sand with negligible effects on U(VI) and phosphate transport. However, U(VI) and phosphate transport was retarded in a column packed with goethite-coated sand. The presence of phosphate, either as a co-solute with U(VI) or pre-adsorbed, greatly increased U(VI) adsorption and retardation. U(VI) and phosphate adsorption in our column experiments were rate-limited, and the adsorption of U(VI) and phosphate was not reversible, with kinetic limitations more pronounced for desorption than for adsorption. This study demonstrated the importance of phosphate in controlling U(VI) mobility in subsurface environments and helped illustrate some phenomena potentially applicable to U(VI) adsorption and transport in natural systems, especially where U(VI) adsorption is rate-limited.     

Chronic toxicity of tributyltin to development and reproduction of the European freshwater snail Lymnaea stagnalis (L.)

Chronic toxicity, growth and reproduction were measured in the freshwater gastropod Lymnaea stagnalis exposed to waterborne bis(tri-n-butyltin) oxide (TBTO) over a range of four nominal concentrations (0-10microg TBTl(-1)). Egg development was completely inhibited at 10microg TBTl(-1), whilst abnormal embryonic development was observed at 1microg TBTl(-1). For the solvent control and the 0.01microg TBTl(-1)treatment group, normal development of L. stagnalis was observed. Survivorship of hatchlings was significantly reduced by TBT at 1microgl(-1) while inhibition of shell growth of L. stagnalis was also observed at this concentration. The data were used to determine intrinsic growth rates (r) using two theoretical approaches (the Euler-Lotka equation and a Leslie Matrix). Both approaches showed that survival, fecundity and population growth rate were reduced at 1microg TBTl(-1). Interestingly, at 0.01microg TBTl(-1) snails showed a higher fecundity and growth rate than in the solvent control. The TBT concentration at which the r would equal zero (ECr(0)) and the population NOEC (No Observed Effect Concentration) were estimated. The population NOEC was defined as either the lower 95% confidence or lower 95% pointwise percentile limit of the ECr(0). Values obtained using the two different approaches were similar and thus a geometric mean was calculated to obtain a final representative population NOEC value for L. stagnalis of 2745ng TBTl(-1). The present data together with chronic toxicity TBT data for freshwater organisms, obtained from peer-reviewed literature, were used to construct a species sensitivity distribution (SSD). A predicted no effect concentration was then derived from the SSD (hazardous concentration at 5%, i.e., HC5 or 95% protection level). This SSD was compared with the SSD derived from saltwater species datasets. The HC5 value for saltwater species (3.55ng TBTl(-1); lower confidence limit: 1.93ng TBTl(-1)) was significantly lower than that for freshwater species (30.13ng TBTl(-1); lower confidence limit: 9.23ng TBTl(-1)), indicating that saltwater species are probably more susceptible to TBT than their freshwater counterparts.     

Transport of organic contaminants through salinity stratified water masses. A microcosm experiment

A salt-wedge stratified microcosm, spiked with 31 target analytes, including PCBs, organochlorine and organophosphorous pesticides, triazines, organophosphate flame retardants and caffeine (an urban wastewater molecular marker), was setup. Compound behaviour was monitored during a four week period, by sampling at six different levels of the water column, in order to understand the transport and loss processes of the different classes of chemical substances. Compound transport from one water body to the other has been positively correlated with diffusion via their molar volume. Target analytes loss has been positively correlated with evaporation via their K(H) and with degradation via their halve-lives. From these two processes, evaporation was found to be predominant using a multiparametric regression.     

Evaluations of the chemical mass balance method for determining contributions of gasoline and diesel exhaust to ambient carbonaceous aerosols

The US. Department of Energy Gasoline/Diesel PM Split Study was conducted to assess the sources of uncertainties in using an organic compound-based chemical mass balance receptor model to quantify the relative contributions of emissions from gasoline (or spark ignition [SI]) and diesel (or compression ignition [CI]) engines to ambient concentrations of fine particulate matter (PM2.5) in California's South Coast Air Basin (SOCAB). In this study, several groups worked cooperatively on source and ambient sample collection and quality assurance aspects of the study but worked independently to perform chemical analysis and source apportionment. Ambient sampling included daily 24-hr PM2.5 samples at two air quality-monitoring stations, several regional urban locations, and along freeway routes and surface streets with varying proportions of automobile and truck traffic. Diesel exhaust was the dominant source of total carbon (TC) and elemental carbon (EC) at the Azusa and downtown Los Angeles, CA, monitoring sites, but samples from the central part of the air basin showed nearly equal apportionments of CI and SI. CI apportionments to TC were mainly dependent on EC, which was sensitive to the analytical method used. Weekday contributions of CI exhaust were higher for Interagency Monitoring of Protected Visual Environments (IMPROVE; 41+/-3.7%) than Speciation Trends Network (32+/-2.4%). EC had little effect on SI apportionment. SI apportionments were most sensitive to higher molecular weight polycyclic aromatic hydrocarbons (indeno[123-cd]pyrene, benzo(ghi)perylene, and coronene) and several steranes and hopanes, which were associated mainly with high emitters. Apportionments were also sensitive to choice of source profiles. CI contributions varied from 30% to 60% of TC when using individual source profiles rather than the composites used in the final apportionments. The apportionment of SI vehicles varied from 1% to 12% of TC depending on the specific profile that was used. Up to 70% of organic carbon (OC) in the ambient samples collected at the two fixed monitoring sites could not be apportioned to directly emitted PM emissions.     

Evaluation of trichloroethene recovery processes in heterogeneous aquifer cells flushed with biodegradable surfactants

The ability of two biodegradable surfactants, polyoxyethylene (20) sorbitan monooleate (Tween 80) and sodium dihexyl sulfosuccinate (Aerosol MA), to recover a representative dense non-aqueous-phase liquid (DNAPL), trichloroethene (TCE), from heterogeneous porous media was evaluated through a combination of batch and aquifer cell experiments. An aqueous solution containing 3.3% Aerosol MA, 8% 2-propanol and 6 g/l CaCl(2) yielded a weight solubilization ratio (WSR) of 1.21 g TCE/g surfactant, with a corresponding liquid-liquid interfacial tension (IFT) of 0.19 dyn/cm. Flushing of aquifer cells containing a TCE-DNAPL source zone with approximately two pore volumes of the AMA formulation resulted in substantial (>30%) mobilization of TCE-DNAPL. However, a TCE mass recovery of 81% was achieved when the aqueous-phase flow rate was sufficient to displace the mobile TCE-DNAPL toward the effluent well. Aqueous solutions of Tween 80 exhibited a greater capacity to solubilize TCE (WSR=1.74 g TCE/g surfactant) and exerted markedly less reduction in IFT (10.4 dyn/cm). These data contradict an accepted empirical correlation used to estimate IFT values from solubilization capacity, and indicate a unique capacity of T80 to form concentrated TCE emulsions. Flushing of aquifer cells with less than 2.5 pore volumes of a 4% T80 solution achieved TCE mass recoveries ranging from 66 to 85%, with only slight TCE-DNAPL mobilization (<5%) occurring when the total trapping number exceeded 2 x 10(-5). These findings demonstrate the ability of Tween 80 and Aerosol MA solutions to efficiently recover TCE from a heterogeneous DNAPL source zone, and the utility of the total trapping number as a design parameter for a priori prediction of DNAPL mobilization and bank angle formation when flushing with low-IFT solutions. Given their potential to stimulate microbial reductive dechlorination at low concentrations, these surfactants are well-suited for remedial action plans that couple aggressive mass removal followed by enhanced bioremediation to treat chlorinated solvent source zones.