分散生活污水处理技术及其分析

结合分散性生活污水的水质水量特点,介绍了几种适合处理此类污水的工艺技术,同时就其自身的特点、适用性及工程经济性等方面进行了分析比较,得出净化沼气池、人工湿地、蚯蚓生态滤池、高效藻类塘技术的投资、运行费用低、管理简单方便.而膜生物反应器和一体化处理装置的投资和运行费用都较高,且需要专业技术人员管理,可应用于经济发展水平高,对出水水质要求高的地区.同时,也提出了分散性生活污水处理技术应用中尚待解决的问题,旨在为我国分散性生活污水的治理服务.     

沙口水厂水源保护管理体系的建立

介绍了我国、广东省、其他市出台的有关水源保护管理的一些政策,阐述了佛山市禅城区在沙口水厂水源保护工作体制、技术、资金等方面的一些创新做法。     

浑河主要污染指标特征性分析

利用1995年至2010年浑河干流7个常规监测断面的历年监测数据,通过统计分析确定浑河水质的主要污染指标为氨氮、总磷（TP）、化学需氧量（COD）和生化需氧量（BOD）。并指出1995～2000年间,浑河有机污染突出,2000年以后,浑河水质氮、磷污染更为突出,有机污染有所改善。并详细分析了这四项主要污染指标的时间及水期间分布规律,为浑河流域水污染治理及编制流域规划提供技术支撑。     

工业用煤气燃烧装置二氧化硫减排方式的讨论

工业用煤气是工业生产中普遍采用的气体燃料,煤气燃烧过程会产生二氧化硫,减少煤气燃烧过程的二氧化硫排放可采用煤气脱硫和烟气脱硫两种方式。本文通过对煤气脱硫工艺及烟气脱硫工艺原理及参数进行对比的方式,讨论工业用燃气燃烧装置的两种二氧化硫减排方式的优缺点,为该类装置脱硫设计提供参考。     

环渤海湿地芦苇对TC、TN、TP吸收通量的研究

主要调查研究环渤海湿地芦苇对TC、TN、TP的吸收通量。调查表明,2008年环渤海湿地的芦苇面积为20.08×104hm2。2009年,芦苇总生物量在7月、10月和11月的调查结果分别为267.2×104t、183.4×104t和138.0×104t。7月、10月和11月,芦苇对TC的吸收通量分别为115.58×104t、80.68×104t、64.23×104t;对TN的吸收通量分别为4.03×104t、1.45×104t、0.84×104t;对TP的吸收通量分别为0.37×104t、0.10×104t、0.031×104t。     

基于多线程技术的中国海风暴潮数值预报可视化程序开发

首先简要介绍了中国海的风暴潮及灾害情况,对杭州湾一带的风暴潮进行了重点阐述。在风暴潮二维数值模型FBM的基础上开发了具有可视化界面的数值计算程序,能直观的显示风暴潮发展时历,包括风暴潮最大增水、台风风向和移速。采用了多线程技术,可节省时间,程序具有Windows风格的人机交互界面,操作方便。通过几个算例测试,本程序计算结果符合工程预报需要,可为同类研究做一些参考,具有推广意义。     

胶州湾沉积物氮的环境生物地球化学意义

利用氮的分级浸取技术,研究了胶州湾不同粒级沉积物中氮的赋存形态.研究表明,胶州湾沉积物中可转化态氮可分为离子交换态、弱酸浸取态、强碱浸取态和强氧化剂浸取态.不同粒级沉积物中各形态氮占可转化态氮的比例各不相同.在细、中和粗粒级沉积物中,强氧化剂浸取态氮是可交换态氮的优势形态,分别占可转化氮的35.38%、44.38%和58.69%.在中、粗粒级沉积物中,强碱浸取态氮是无机氮的主要赋存形态,分别占可转化态氮的26.31%和25.85%.在细粒级沉积物中,离子交换态氮是优势态的无机氮,占可转化态氮的27.67%.相关分析表明,对于胶州湾来说,沉积物的粒度越细,氮的含量就越高,各形态氮大致与细、中粒级沉积物含量呈正相关,而与粗粒级沉积物含量呈负相关.研究还表明,不同粒级沉积物中氮与浮游植物数量、叶绿素a以及上覆水体中硝酸盐的含量大致都在一定程度上呈正相关,这一方面说明了沉积物对上覆水体元素的含量有着不可忽视的影响,另一方面也说明了沉积物中的氮对海水的富营养化水平有着较好的指示和十分重要的环境意义.     

Development of analytical methods for polycyclic aromatic hydrocarbons （PAHs） in airborne particulates： A review

In the present work, the different sample collection, pretreatment and analytical methods for polycyclic aromatic hydrocarbons （PAHs） in airborne particulates is systematacially reviewed, and the applications of these pretreatment and analytical methods for PAHs are compared in detail. Some comments on the future expectation are also presented.     

Oxidation inhibition of sulfite in dual alkali FGD system

A laboratory-scale well-mixed thermostatic reactor with continuously blasting air was used to investigate the oxidation inhibition of sulfite in dual alkali flue gas desulfurization （FGD） system. The effects of operating parameters such as pH value and catalyst concentration on the oxidation were studied. Sodium thiosulfate was used in the system, and was found that it significantly inhabited the sulfite oxidation. In the absence of catalyst, sodium thiosulfate at 12.67 mmol/L had an inhibition efficiency of approximately 98%. While in the presence of catalyst, sodium thiosulfate at 26.72 mmol/L had an inhibition efficiency less than 85.0%. The oxidation reaction order of sulfite in the sodium thiosulfate was determined to be -1.90 and 4）.55 in the absence and presence of the catalyst, respectively. Apparent activation energy of oxidation inhibition was calculated to be 53.9 kJ/mol. Pilot tests showed that the consumption rate of thiosulfate agreed well with the laboratory-scale experimental results.     

Reversibly enhanced aqueous solubilization of volatile organic compounds using a redox-reversible surfactant

Surfactant-enhanced remediation (SER) is an effective method for the removal of volatile organic compounds (VOCs) from contaminated soils and groundwater. To reuse the surfactant the VOCs must be separated from the surfactant solutions. The water solubility of VOCs can be enhanced using reversible surfactants with a redox-acive group, (ferrocenylmethyl)dodecyldimethylammonium bromide (Fcl2) and (ferrocenylmethyl)tetradecanedimethylammonium bromide (Fcl4), above and below their critical micelle concentrations (CMC) under reducing (I⁺) and oxidative (I²⁺) conditions. The CMC values of Fcl2 and Fcl4 in I⁺ are 0.94 and 0.56 mmol/L and the solubilization of toluene by Fcl2 and Fcl4 in I⁺ for toluene is higher than the solubilization achieved with sodium dodecyl sulfate, cetyltrimethylammonium bromide and Trition X-114. The solubilization capacity of the ferrocenyl surfactants for each tested VOCs ranked as follows: ethylbenzene > toluene > benzene. The solubilities of VOCs by reversible surfactant in I⁺ were 30% higher than those in I²⁺ at comparable surfactant concentrations. The effects of Fcl4 concentrations on VOCs removal efficiency were as follows: benzene > toluene > ethylbenzene. However, an improved removal efficiency was achieved at low ferrocenyl surfactant concentrations. Furthermore, the reversible surfactant could be recycled through chemical approaches to remove organic pollutants, which could significantly reduce the operating costs of SER technology.