浅议提高环保工程项目的质量管理水平

分析了环保工程总承包项目质量管理中存在的主要问题，提出了提高项目质量管理水平的主要措施。     

水源热泵空调系统的水质处理技术

针对影响水源热泵系统运行效能的地下水水质和回灌过程中井堵塞的问题,提出相应的水质处理方法和水源热泵用地下水水质参考标准.     

抗污染的树

许多植物在千百万年漫长进化演变过程中，炼就了非凡的绝招。它们对钾、铅、硫、氯、硒、锶、铠等化学元素有着神奇的解毒功能，并能从水、空气、土壤中吸收有害的污染物质，自行消化排解。     

石油污染土壤生物修复技术的研究进展

目前对石油污染环境的治理方法有物理法、化学法和生物修复三种类型。文章综合论述了国内外对石油污染土壤的几种微生物修复方法,分别介绍了利用植物、动物及微生物进行治理的修复技术。在我国,对于石油污染的治理应更多地采用低成本、无污染、高效率的生物治理技术。     

含油污泥特点及处理方法

含油污泥主要来源于油田开采、油气集输及污水处理场,污泥中一般含油率在10%～50%,含水率在40%～90%。文章介绍了不同来源含油污泥的特点及脱水方法,并对各种含油污泥处理方法的优、缺点进行了比较。研究结果表明,各种方法都有其特点和适用范围。由于含油污泥成分复杂,没有任何一种处理方法可以处理所有类型的含油污泥。     

A study on oxidative degradation of polyacrylamide in wastewater with UV/FENTON/C4H4O62−

The degradation of polyacrylamide (PAM) in simulate wastewater was studied in UV/Fenton/C₄H₄O₆^2? system. The factors such as molecular ratio of H₂O₂/Fe²⁺/C₄H₄O₆^2?, pH, and the dosage of Fenton reagent that could affect the PAM degradation in the UV/Fenton/C₄H₄O₆^2? system were investigated. The experimental results showed that adding C₄H₄O₆^2? to UV/Fenton system could form photosensitive ferrous complexes, which led to higher degradation efficiency of PAM. The degradation rate of PAM could be up to 95.2% under the following conditions: the concentration of H₂O₂, Fe²⁺, and C₄H₄O₆^2? were 22.5, 2.25, and 2.25 mmol/L, respectively (i.e., molecular ratio of H₂O₂/Fe²⁺/C₄H₄O₆^2? was 10:1:1), the pH value was 3.0.     

Research on ecosystem services of water conservation and soil retention: a bibliometric analysis

Environmental Science and Pollution Research - Water conservation and soil retention are two essential regulating services that are closely related, and their relationship might produce synergies...     

Contaminant mass flux and forensic assessment of polycyclic aromatic hydrocarbons: Tools to inform remediation decision making at a contaminated site in Canada

Polycyclic aromatic hydrocarbons (PAHs) and metal(loid) mass flux estimates and forensic assessment using PAH diagnostic ratios were used to inform remediation decision making at the Sydney Tar Ponds (STPs) and Coke Ovens cleanup project in eastern Canada. Environmental effects monitoring of surface marine sediments in Sydney Harbor indicated significantly higher PAH concentrations during the first year of remediation monitoring compared to baseline. This was equivalent to PAH loadings of ～2,000 kg over a 15‐month period. Increases in sediment PAH concentrations raised serious concerns for regulators, who requested cessation of remediation activities early in the $400 M (CAD) project. Historically, the STPs were reported as the primary source of PAH contamination in Sydney Harbor with estimated discharges of 300 to 800 kg/year between 1989 and 2001. Mass flux estimates of PAHs and metal(loid)s and PAH diagnostic ratios were used to evaluate if increases in PAH concentrations in marine sediments were the result of the STPs remediation activities. PAH mass flux estimates approximated that 17 to 97 kg/year were discharged from the STPs during three years of remediation and were corroborated by an independent PAH flux estimate of 119 kg in year 1. PAH fluxes to the Sydney Harbor were mostly surface water derived, with groundwater contributing negligible quantities (0.002–0.005 kg/year). Fluxes of metal(loid)s to harbor sediments were stable or declining across all years and were mirrored in sediment metal(loid) concentrations, which lacked temporal variation, unlike total PAH concentrations. Flux results were also corroborated using PAH diagnostic ratios, which found a common source of PAHs. Coal combustion was likely the principal source of PAHs and not migration from the STPs during remediation. Although short‐term residual sediment PAH increases during onset of remediation raised concerns for regulators, calls for premature cessation of remediation early in the project were unwarranted based on only one year of monitoring data. Mass flux estimates and forensic assessments using PAH diagnostic ratios proved useful tools to inform remediation decision making that helped environmental protection and reduced costs associated with lost cleanup time.     

Comparison of the daily global solar radiation from different data sources in Northwest China climate

The solar radiation data are of high importance to the solar energy systems. Conventional methods to obtain the solar radiation data are from weather stations, solar radiation models, commercial software databases, and field measurements. In the present study, a new daily global solar radiation model is proposed, by combining the quadratic function of sunshine fraction and sine function of the day of the year. The solar radiation model calculated data are then compared with China Meteorological Data Sharing System (CMDSS) data, TRNSYS data, and field-measured data in Northwest China climate. It is found that the newly proposed solar radiation model has better performance than the other nine solar radiation models in the literature. The solar radiation model calculated data fit well with the CMDSS annually average data. The TRNSYS data are a bit larger than the CMDSS annually average data in summer half year and a little smaller than those in winter half year. The solar radiation model and the CMDSS annually average data have the best correlation, whereas the TRNSYS data and the field-measured data have the worst correlation. The solar radiation model calculated data have the best correlation with the other three data sources.     

Mn/γ-Al2O3催化剂的制备及头孢合成废水的催化臭氧氧化法深度处理

对Mn/γ-Al₂O₃催化剂的制备条件及头孢合成废水的催化臭氧氧化法深度处理工艺条件进行了优化。实验结果表明：以Mn（NO₃）₂溶液为浸渍液，Mn/γ-Al₂O₃催化剂的最优制备条件为浸渍液浓度0.10 mol/L、浸渍时间9 h、焙烧温度400 ℃、焙烧时间2 h;在反应时间为30 min、废水pH为9.0、臭氧通量为4.6 mg/min、催化剂加入量为5 g/L的条件下，当进水COD、BOD₅、ρ（氨氮）和色度分别为220~250 mg/L，8~10 mg/L，10~12 mg/L和60~70倍时，出水COD、BOD₅、ρ（氨氮）和色度的平均去除率分别为53%，30%，33%和93%，出水水质满足GB 21904—2008《化学合成类制药工业水污染物排放标准》的要求。