提高潜流式人工湿地氮去除率的方法研究进展

潜流式人工湿地能够有效地去除舍碳有机污染物。但一般对舍氮污染物的去除效果相对较弱。针对这一问题，在参考国内外前人研究的基础上。总结并提出了提高污水中氮去除率的方法。指出应根据实际情况选择合适的植物和基质来构造湿地系统．通过增加一些必要的工程措施和改变一些管理手段如间歇运作及其他方法可增加湿地系统内部的溶解氧量来创造去除氮所需环境．还可通过对湿地系统进行工艺优化设计等措施来提高潜流式人工湿地氮去除率。     

利用多次回归拟合水的饱和蒸气压与温度的关系表达式

在使用于湿球测定锅炉烟气含湿量的过程中,需要查找水的饱和蒸气压,非常不方便.利用D-196和<化工原理>上册中取得部分数据,用多次线性回归的方法,拟合出水在0～200℃范围内的饱和蒸气压与温度的关系表达式;并对该表达式的误差进行了分析,误差均值为0.2‰,最大值也只有0.8‰,完全可以满足环境监测中数据处理的精度要求.     

Growth responses of Picea mongolica seedlings to defoliation rate

Picea mongolica W. D. Xu. is an endemic species in China. The spruce forest is only found in semi-arid habitat in Inner Mongolia Autonomous Region of China. Based on the simulative defoliation experiment, it was proved that Picea mongolica seedlings had the compensatory and overcompensatory effects under the certain defoliation rate. The results of variance analysis on growth indexes showed that in PM I (natural regeneration seedlings under Picea mongolica forest), the differences of H1 (height in June 23 ) and H2 (height in September 3) were extremely significant, and the difference of D(diameter at the breast height) were not significant. In PM Ⅱ (artificial regeneration seedlings under Betula platyphylla Suk. forest), the difference of H1 was significant, the difference of H2 was not significant, and the difference of D was extremely significant. The regression equations were established and the compensatory and overcompensatory points were obtained. In PM I, the compensatory points of H1, H2, and D were 0.7628, 0.7436, 0.5725, and the overcompensatory points were 0.6056, 0.5802 and 0.2909 respectively. In PM Ⅱ, the compensatory points of H1, H2, and D are 0.5012, 0.3421, 0.2488, and the overcompensatory points are 0.4137, 0.2633 and 0.0747 respectively. These results suggested that the induction of compensatory growth mechanisms in spruce seedlings required a threshold level of defoliation, and the insects in Picea mongolica forest could be controlled in a certain de clree.     

Ni2+对2-氯酚厌氧降解系统的影响

针对重金属对难降解有毒有机物厌氧降解的影响问题,采用间歇试验法研究Ni2 对2-氯酚(2-CP)厌氧降解系统的影响规律.结果表明,当ρ(Ni2 )＜5 mg/L时,Ni2 对2-CP厌氧降解表现出轻度促进,当ρ(Ni2 )为5～500 mg/L,Ni2 以抑制作用为主,抑制作用随ρ(Ni2 )的增加而增强.Ni2 对原基质及关键中间产物苯酚和苯甲酸的抑制程度表现为:苯酚＞苯甲酸＞2-CP;ρ(Ni2 )低时的驯化能有效提高厌氧污泥对Ni2 毒性的耐受性能,300 mg/L Ni2 对2-CP降解的抑制从驯化前的65%降至驯化后的21%.Ni2 对2-CP厌氧降解的抑制作用与污泥中Ni的截留量之间存在正相关关系.抑制浓度CIP值和方程αC=[1-(I/I*)m]/[1 (I/I*)n)]能较好地表征厌氧生物处理过程受抑制程度.     

兴仁高砷煤矿区溪流水系环境中砷自然净化的初步研究

为了解矿山环境中砷的自然净化能力及其净化机制,对兴仁典型高砷煤矿区溪流水系环境进行采样分析。结果表明,研究区水体和沉积物中砷含量从上游到下游均呈不断降低的变化趋势,水体显示较强的自净能力。上游水体中砷含量的降低主要是吸附沉淀作用,而溪流的简单稀释作用在下游也显得非常重要。     

Toxic effects of wastewater from various phases of monosodium glutamate production on seed germination and root elongation of crops

To make a comprehensive assessment on monosodium glutamate (MSG) wastewater pollution, a pollution exposure experiment was carried out on the seed germination and root elongation of wheat, Chinese cabbage and tomato by using the wastewater discharged from different processing phases of MSG production. The results showed that there were significantly positive linear relationships between the inhibitory rates of wheat seed germination and root elongation and the COD_cr of the mother liquor scraps. The toxicity of MSG wastewater to the test crops was in the order of tomato > Chinese cabbage > wheat, indicating that tomato was the most sensitive to the wastewater, and could be considered as an ideal toxic bioindicator. The half-effect concentrations (IC₅₀) based on the seed germination and root elongation of the test crops exposed to the wastewater discharged from various processing phases of MSG production was 22.0–32 432 and 17.3–3320 mg/L, respectively. Translated from Chinese Journal of Applied Ecology, 2006, 17(7): 1286–1290 [译自: 应用生态学报]     

一种超声速气体冲击射流噪声的屏蔽抑制方法

根据对冲击射流离散频率噪声产生的反馈机理的认识，提出了一种能够有效地破坏反馈环的形成，从而抑制冲击射流离散频率噪声的喷嘴屏蔽方法。这种方法是通过阻隔反馈声波使其不能到达喷嘴唇口、同时屏蔽物不与射流接触来实现降噪的目的，实验结果表明，对于合适的屏蔽罩参数，正常降噪效果达5dB以上。分析表明这种降噪方法对射流冲击平板的推力和除尘除水效率的提高有帮助。     

浅谈云南省有机食品的发展

我国有机食品的发展起步较晚，但近年增长较快。云南省具有多方面优势，只要政府重视，加强宣传，在政策上给予一定优惠，加强有机食品管理，就一定能打开国际市场，进而取得较大发展。     

我省专科学生使用互联网存在的问题及对策

高职高专学生在我省大学生群体占有较大的比重。他们对互联网的认识和使用中 存在一些带有普遍性问题。针对这些问题。我们提出了一些教育对策和建议。     

大型车车身覆盖件冲压成形特征分析及选材研究

为满足大型车身覆盖件冲压成形要求并实现钢板与零件的对路供应 ,必须在深入解析零件成形特征的基础上 ,确定高应变部位的成形敏感材料参数。在材料力学性能测试和成形极限分析的基础上 ,对侧围外板的冲压成形特征和成形敏感参数进行了分析。结果表明 :侧围外板零件高应变部位的变形方式为胀形 深拉延变形 ,n值和r值为影响侧围外板零件成形的主要材料敏感参数