Dynamic nano-Ag colloids cytotoxicity to and accumulation by Escherichia coli: Effects of Fe3+, ionic strength and humic acid

Released Ag ions or/and Ag particles are believed to contribute to the cytotoxicity of Ag nanomaterials, and thus, the cytotoxicity and mechanism of Ag nanomaterials should be dynamic in water due to unfixed Ag particle:Ag⁺ ratios. Our recent research found that the cytotoxicity of PVP-Ag nanoparticles is attributable to Ag particles alone in 3 hr bioassays, and shifts to both Ag particles and released Ag⁺ in 48 hr bioassays. Herein, as a continued study, the cytotoxicity and accumulation of 50 and 100 nm Ag colloids in Escherichia coli were determined dynamically. The cytotoxicity and mechanisms of nano-Ag colloids are dynamic throughout exposure and are derived from both Ag ions and particles. Ag accumulation by E. coli is derived mainly from extracellular Ag particles during the initial 12 hr of exposure, and thereafter mainly from intracellular Ag ions. Fe³⁺ accelerates the oxidative dissolution of nano-Ag colloids, which results in decreasing amounts of Ag particles and particle-related toxicity. Na⁺ stabilizes nano-Ag colloids, thereby decreasing the bioavailability of Ag particles and particle-related toxicity. Humic acid (HA) binds Ag⁺ to form Ag⁺-HA, decreasing ion-related toxicity and binding to the E. coli surface, decreasing particle-related toxicity. HA in complex conditions showed a stronger relative contribution to toxicity and accumulation than Na⁺ or Fe³⁺. The results highlighted the cytotoxicity and mechanism of nano-Ag colloids are dynamic and affected by environmental factors, and therefore exposure duration and water chemistry should be seriously considered in environmental and health risk assessments.     

Revealing the changes of bacterial community from water source to consumers tap: A full-scale investigation in eastern city of China

This study profiled the bacterial community variations of water from four water treatment systems, including coagulation, sedimentation, sand filtration, ozonation-biological activated carbon filtration (O₃-BAC), disinfection, and the tap water after the distribution process in eastern China. The results showed that different water treatment processes affected the bacterial community structure in different ways. The traditional treatment processes, including coagulation, sedimentation and sand filtration, reduced the total bacterial count, while they had little effect on the bacterial community structure in the treated water (before disinfection). Compared to the traditional treatment process, O₃-BAC reduced the relative abundance of Sphingomonas in the finished water. In addition, ozonation may play a role in reducing the relative abundance of Mycobacterium. NaClO and ClO₂ had different effects on the bacterial community in the finished water. The relative abundance of some bacteria (e.g. Flavobacterium, Phreatobacter and Porphyrobacter) increased in the finished water after ClO₂ disinfection. The relative abundance of Mycobacterium and Legionella, which have been widely reported as waterborne opportunistic pathogens, increased after NaClO disinfection. In addition, some microorganisms proliferated and grew in the distribution system, which could lead to turbidity increases in the tap water. Compared to those in the finished water, the relative abundance of Sphingomonas, Hyphomicrobium, Phreatobacter, Rheinheimera, Pseudomonas and Acinetobacter increased in the tap water disinfected with NaClO, while the relative abundance of Mycobacterium increased in the tap water disinfected with ClO₂. Overall, this study provided the detailed variation in the bacterial community in the drinking water system.     

Metabolomic modulations in a freshwater microbial community exposed to the fungicide azoxystrobin

An effective broad-spectrum fungicide, azoxystrobin (AZ), has been widely detected in aquatic ecosystems, potentially affecting the growth of aquatic microorganisms. In the present study, the eukaryotic alga Monoraphidium sp. and the cyanobacterium Pseudanabaena sp. were exposed to AZ for 7 days. Our results showed that 0.2–0.5 mg/L concentrations of AZ slightly inhibited the growth of Monoraphidium sp. but stimulated Pseudanabaena sp. growth. Meanwhile, AZ treatment effectively increased the secretion of total organic carbon (TOC) in the culture media of the two species, and this phenomenon was also found in a freshwater microcosm experiment (containing the natural microbial community). We attempted to assess the effect of AZ on the function of aquatic microbial communities through metabolomic analysis and further explore the potential risks of this compound. The metabonomic profiles of the microcosm indicated that the most varied metabolites after AZ treatment were related to the citrate cycle (TCA), fatty acid biosynthesis and purine metabolism. We thereby inferred that the microbial community increased extracellular secretions by adjusting metabolic pathways, which might be a stress response to reduce AZ toxicity. Our results provide an important theoretical basis for further study of fungicide stress responses in aquatic microcosm microbial communities, as well as a good start for further explorations of AZ detoxification mechanisms, which will be valuable for the evaluation of AZ environmental risk.     

一株高效嗜碱反硝化菌的分离鉴定及其脱氮特性研究

为了应对日趋严苛的废水TN排放标准要求,试验采用溴百里酚蓝（BTB）培养基,从某煤化工废水处理厂反硝化缺氧池活性污泥中,经多次分离、纯化获得了一株高效兼性厌氧反硝化菌株HK13.通过形态观察及16S rRNA基因序列分析,菌株HK13被鉴定为施氏假单胞菌属（Pseudomonas stutzeri）.在此基础上,利用含硝酸盐模拟废水,探讨了碳源类型、C/N（碳氮比）、初始pH、溶解氧（以不同摇床转速表征不同浓度的溶解氧）和培养温度对菌株HK13反硝化脱氮能力的影响,确定了该菌株的最优生长条件和最大脱氮效率.结果表明:①菌株HK13最适反硝化脱氮条件为以柠檬酸钠碳源,C/N 8,培养温度35℃,初始pH 8~10,摇床转速100 r/min.②初始ρ（NO₃--N）为106.67 mg/L下,反应12 h后菌株HK13对TN的去除率可达92.62%;反应9~12 h时,该菌株的脱氮速率最高,可达20.03 mg/（L·h）,其16 h的脱氮率在98%以上,且无亚硝酸盐积累.③菌株HK13适宜生长的温度和pH范围广泛,分别为20~40℃和7~10.研究显示,菌株HK13具有快速高效的脱氮能力及嗜碱特性,拓宽了生物脱氮工艺对环境条件的适用范围,在废水脱氮领域具有广泛的应用前景.      

日本城市有机废弃物甲烷发酵资源化系统案例分析及最新研究进展

为建设可持续发展社会,日本近年来大力推动甲烷发酵以实现城市有机废弃物的减量化和资源化。首先介绍了日本城市有机废弃物资源化的2个实用案例,长冈市厨余垃圾沼气发电中心和丰桥市生物质资源利用中心的设计和运营状况。两者的长期稳定运行及产能效果验证了甲烷发酵技术在城市有机废弃物减量化和资源化上的可行性。其次,为了应对社会发展趋势和城市有机废弃物处理的技术需求,介绍了日本有关厨余垃圾、污泥以及废纸（城市有机废弃物的3大组分）的单独发酵及共发酵的部分研究成果。此外,简要介绍了应用厌氧膜生物反应器（AnMBR）进行相关高效甲烷发酵的最新研究成果。并根据实用案例调查和实验研究结果,以100万人口城市为例,对城市有机废弃物的各种甲烷发酵系统的产能效果进行了模拟概算。     

含油污泥处理技术进展

石油工业生产的特征固体废物——含油污泥,是一种由石油烃、水、固体颗粒物和其他物质（如重金属）组成的固态/半固态复合物,因毒性和易燃性被归入危险废物管理。我国含油污泥年产量高达500万t,其中含有15%~50%的石油烃。含油污泥的处理要兼顾无害化和资源化。基于其组成、性质和危害,介绍了含油污泥的油品资源化分离法（离心、溶剂萃取、热解）和无害化剩余含油残渣处理法（焚烧、固化、生物处理）等国内外常用的处理方法。大体上,含油污泥的处理思路为,首先预处理降低含水率、提高含油率,再经油品分离法回收含油污泥中的石油烃,最后无害化处理剩余含油残渣。讨论了各方法的特点以及国内外研究进展,提出了含油污泥处理技术的发展建议。     

基于风险矩阵和五元减法集对势的湖泊水生态健康动态诊断评估

为判断湖泊水生态健康子系统发展趋势、诊断病态因子,引进了五元减法集对势,建立生态子系统与物理化学子系统的合成矩阵得到湖泊水生态健康状态,从而提出了基于风险矩阵和五元减法集对势的湖泊水生态健康动态诊断评估方法,并应用于安徽省瓦埠湖。结果表明:瓦埠湖水生态健康状态1980—2015年呈变差趋势,2012年为微病态,2015年略有好转。五元减法集对势识别出瓦埠湖水生态健康的病态因子主要有底栖动物、浮游动物、叶绿素、COD、TN、TP和透明度,为改善瓦埠湖水生态健康的重要指标。上述风险矩阵和五元减法集对势耦合的动态诊断评估方法可为湖泊水生态健康评估提供新的思路。     

2-丁烯醛生产废水的臭氧脱毒预处理

CMW（crotonaldehyde manufacturing wastewater,2-丁烯醛生产废水）污染物浓度高、毒性强、直接采用生物法处理难度大.为了降低CMW的生物处理毒性,采用臭氧氧化法对CMW进行脱毒预处理,并通过考察不同臭氧氧化条件对废水COD_Cr、TOC（总有机碳）、UV_{254 nm}去除率及SMA（specific methanogenic activity,比产甲烷活性）抑制率的影响,获得了优化的臭氧氧化条件,进一步分析了废水脱毒机理.结果表明:①优化的臭氧氧化条件为接触反应时间180 min、初始pH 3.0、反应温度35℃、气相臭氧浓度30.3 mg/L,进气流量500 mL/min;并且在该条件下,CMW中COD_Cr、TOC和UV_{254 nm}的去除率分别为19.9%、9.9%和70.6%,主要特征有机污染物[包括2-丁烯醛、（E,E）-2,4-己二烯醛、3-（2-甲基-2-丙烯）-5-戊内酯、1,5-二甲基-1-烯-4-羰基-环氧己烷、山梨酸乙酯等]的去除率在74.4%以上.②厌氧产甲烷毒性试验结果显示,CMW的SMA抑制率由臭氧氧化前的82.0%降至臭氧氧化后的47.2%.③反应动力学研究显示,CMW中COD_Cr、TOC及UV_{254 nm}的去除过程均符合一级反应动力学方程,R2分别为0.82、0.97、0.94.研究显示,臭氧氧化预处理可以较好地去除CMW中的特征有机污染物,降低废水的厌氧生物处理毒性,是一种可行的脱毒预处理方法.      

郑州市VOCs组分排放清单及其臭氧生成潜势

基于人为源挥发性有机物（VOCs）活动水平统计和源成分谱梳理,采用排放因子法,建立了郑州市2016年VOCs组分排放清单,评估了各类源臭氧生成潜势（OFP）.结果表明,2016年郑州市人为源VOCs排放总量为96215.3 t,排放量最高的是道路移动源（29.7%）,其次是有机溶剂使用源（28.1%）;排放量最高的组分是烷烃（29.8%）,其次是芳香烃（29.0%）.郑州市人为源VOCs的OFP为341291.0 t,贡献最高的排放源是道路移动源（30.5%）,其次是溶剂使用源（28.8%）,其中轻型汽油车、内墙涂料使用、机动车表面涂层、加油站装卸油和非金属矿物制造是OFP的主要次级排放源,也是郑州市降低臭氧污染时需重点管控的VOCs排放源.对于VOCs种类而言,贡献较高的是芳香烃（42.8%）,其次是烯烃（38.9%）,未来应加强对间/对-二甲苯、丙烯和乙烯等物种排放来源的控制.     

河北坝上与坝下不同土地利用类型土壤入渗特征及其影响因素

为查明河北省坝上与坝下不同土地利用类型土壤入渗能力,选择张北县（坝上风蚀区）和阳原县（坝下水蚀区）作为典型研究区,采用微型圆盘入渗仪测量土壤入渗特性,并分析其主要影响因素。研究结果表明：（1）阳原县不同土地利用类型土壤渗透性能表现为：高盖度草地>低盖度草地>耕地>林地,张北县表现为：草地>耕地>灌木林地>防护林地;（2）不同入渗模型拟合度之间存在显著差异,其中Philip模型拟合效果最佳;（3）土壤初始入渗速率、稳定入渗速率、稳定入渗时间与容重呈极显著负相关关系,而与总孔隙度均呈极显著正相关关系。结果表明,该区草地土壤入渗能力最强,后期开展生态工程建设时应更加重视草地涵养水源的作用。