铍青铜弹簧片应力腐蚀断裂研究

目的研究传感器微动开关弹簧片应力腐蚀的机理,找到断裂原因。方法对弹簧片进行断口形貌观察、能谱成分分析,并进行产品模拟腐蚀实验。结果传感器内部意外进入雨水,在工作温度下形成湿热环境,开关盒中的游离氨在此环境下释放出来,在开关盒内部形成潮湿氨气氛,铍青铜弹簧片工作时凹面一侧承受静拉应力作用,从而在潮湿氨和拉应力共同作用下发生应力腐蚀开裂。结论通过采用无氨酚醛塑料制备开关盒,弹簧片的应力腐蚀得到了有效预防。     

一种模拟动力学边界条件的环境振动试验方法研究

目的提高环境振动试验的可靠性。方法以某典型钛合金蜂窝夹芯壁板试验件为例,提出一种模拟试验件动力学边界条件的试验方法,在试验件周围引入弹性连接件,再通过刚性转接工装与振动台台面连接,以试验件在试验安装状态下的共振频率及振型节线位置为优化目标,以弹性连接件的外形尺寸及厚度为优化变量,对弹性连接件进行优化设计,从而模拟试验件真实的动力学边界条件。结果弹性连接件的优化设计使得试验件在试验安装状态下前两阶共振频率与试验要求相差小于8%,而且振型节线位置与试验要求基本重合,达到了模拟试验件真实动力学边界条件的设计目标。结论对于壁板类试验件,在传统刚性夹具的基础上引入弹性连接件的试验方法,可以较好地模拟试验件真实动力学边界条件,提高环境振动试验的可靠性,并且这种方法对试验费用及试验周期影响较小,具有良好的工程应用前景。     

FRP加固金属结构技术应用研究进展

从FRP加固金属结构设计研究、界面性能研究、工艺研究、耐久性研究等4个方面回顾了FRP加固金属结构技术的发展历程。探讨了FRP加固技术的优势,总结了现阶段FRP修复技术取得的成就和现阶段发展存在的不足。最后,对未来FRP修复技术的发展做了总结。可以预见,随着高性能FRP的不断研制成功以及研究的深入,FRP修复技术必将得到更广泛的应用。     

大气环境质量综合评价加权灰色关联模型的建立与应用

利用灰色理论建立大气环境质量综合评价加权灰色关联模型 ,运用污染贡献率确定权重系数。与其它评价模型相比 ,加权灰色关联模型还具有排序功能 ,实例表明该模型是简便有效的     

毛细管气相色谱法测定烟草中有机氯农药残留

研究了烟草中六六六及滴滴涕异构体含量的气相色谱分析方法.样品以石油醚 丙酮在索氏提取器中提取,提取液以浓硫酸净化.采用DB-5弹性石英毛细管柱分离样品,GC-ECD检测农药六六六、滴滴涕的残留量.方法的线性范围为2.27×10-13～7.66×10-11g;最小检测量为1.3×10-8～3.0×10-7 μg,加标平均回收率为95.3%～103.3%,RSD为2.8%～4.5%.     

中国秸秆焚烧的遥感监测与分析

用最近四年的MODIS火点数据,通过相关处理和分析,得出了全国秸秆焚烧状况的时空分布规律。结果表明,秸秆焚烧最严重的区域一直分布在淮河流域和陕西关中平原,这是秸秆禁烧工作的重点;南部各省秸秆焚烧点密度较小,比较分散,造成的危害相对较小。秸秆焚烧的主要时间,北方集中在夏秋季节,主要是小麦、玉米、油菜等的秸秆;南方集中在冬春季节,主要是水稻、甘蔗、油菜等的秸秆。秸秆焚烧的时空分布规律在最近几年基本无大的变化,秸秆焚烧面积在2002年~2005年期间逐年上升。文章结论反映了各地执行秸秆禁烧政策的效果,可为相关政府部门进行秸秆禁烧工作提供依据。     

上海磁悬浮快速列车环境振动影响探讨

通过对磁悬浮快速列车沿线两侧区域振动监测,得出振动级VLzmax与列车速度有较好的相关性,实测得出了振动随车速变化的衰减系数。同时给出了振动随离轨道距离变化的衰减方程,参照现有环境振动国家标准,给出了不同车速下磁悬浮轨道两侧区域的振动达标距离。     

Occurrence and congeners specific of poiychlorinated biphenyls in agricultural soils from Southern Jiangsu, China

A total of 198 agricultural soil samples were collected from Zhangjiagang and Changshu in Southern Jiangsu for analysis of 13 polychlorinated biphenyls (PCBs) in order to assess the levels of pollution, sources, area distribution, and potential risk for the environment. All methods were rigorously tested and an adequate quality control was ensured. Only one site had no PCBs residues, and the highest total PCBs concentration in the surface soils was 32.83 ng/g. The average concentration in all the soil samples was 4.13 ng/g, signaling low-level pollution. Tetra-, penta-, and hexa-chlorinated biphenyls were dominant species in soil samples, accounting for more than 75% ofΣPCBs in the soil samples. PCB118 was the most abundant congener in all the samples. The PCB118 was about 20% ofΣPCBs. The soil organic matter content showed only a weak correlation with the levels of all PCB congeners, in which a better correlation was noted for the more volatile lighter PCB congeners than for the heavier homologues. To a certain extent, the sources and land use seemed to influence the levels of PCBs.     

Effects of the surface chemistry of macroreticular adsorbents on the adsorption of 1-naphthol/1-naphthylamine mixtures from water

The adsorption behaviors of 1-naphthol, 1-naphthylamine and l-naphthol/l-naphthylamine mixtures in water over two macroreticular adsorbents were investigated in single or binary batch systems at 293 K, 303 K and 313 K respectively. All the adsorption isotherms in the studied systems can be adequately fitted by Langmuir model. In the case of aminated macroreticular adsorbent NDA103, 1-naphthol is adsorbed to a larger extent than 1-naphthylamine; while, the opposite trend is found for nonpolar macroreticular adsorbent NDA100. It is noteworthy that at higher temperature（303 K and 313 K）, the total uptake amounts of 1-naphthol and 1-naphthylamine in all binary-component systems are obvious larger than the pure uptake amounts in single-component systems, which is presumably due to the cooperative effect primarily arisen from the hydrogen-bonding interaction between the loaded 1-naphthol and 1-naphthylamine molecules. The simultaneous adsorption systems were confirmed to be helpful to the selective adsorption towards 1-naphthol according to the larger selective index.     

广州市32种水产品的Se含量特征分析

通过酸消解,原子荧光-氢化物发生法测定了广州市部分市售水产品中Se的含量,由标准物质(GBW 08551猪肝)和回收率控制检测质量.结果表明,不同水产品中Se含量有较大差异,含量范围为(34.-1117.)×10-9,平均含量为(345.±149.)×10-9,不同类型水产品中Se含量变化特征是:甲壳类(544.±107.)×10-9＞海水鱼类(392.±86.)×10-9＞软体类(244.±89.)×10-9＞淡水鱼类(238.±97.)×10-9.