Assessment of Wastewater Reuse Effects on Nutrient Loads from Paddy Field Using Field-Scale Water Quality Model

CREAMS-PADDY, a modified version of the field-scale CREAMS model, simulates the hydrologic, sediment, and nutrient cycles in paddy fields. The CREAMS-PADDY model was applied to estimate the effects of using wastewater for irrigation on nutrient loads from paddy fields in Republic of Korea. The model was calibrated and validated using data from two rice paddy fields. The coefficient of determination between observed and simulated total nitrogen and total phosphorus were 0.92 and 0.57, respectively, for the calibration period and 0.84 and 0.73 for the validation period. Simulations showed that when using wastewater for irrigation, the total nitrogen loads increased by 210% and total phosphorus by 1,270% when compared with conventional water irrigation. The total nitrogen and total phosphorus concentration in the ponded water increased by 254 and 534%, respectively, when compared with conventional water irrigation. The effect of reducing N and P fertilizer application rates by 10, 30, and 50% on nutrient loads exiting a paddy field were also simulated using the validated CREAMS-PADDY model. These simulations indicated that total phosphorus loads from the paddy were reduced only slightly by reducing the fertilizer, while total nitrogen loads were reduced by as much as 8.8, 16.6, and 24.4% when N ferlitizer rates were reduced by 10, 30, and 50%, respectively. An erratum to this article can be found at     

Assessment of air quality benefits from national air pollution control policies in China. Part I: Background,emission scenarios and evaluation of meteorological predictions

Under the 11th Five Year Plan (FYP, 2006–2010) for national environmental protection by the Chinese government, the overarching goal for sulfur dioxide (SO₂) controls is to achieve a total national emissions level of SO₂ in 2010 10% lower than the level in 2005. A similar nitrogen oxides (NO_x) emissions control plan is currently under development and could be enforced during the 12th FYP (2011–2015). In this study, the U.S. Environmental Protection Agency (U.S.EPA)’s Community Multi-Scale Air Quality (Models-3/CMAQ) modeling system was applied to assess the air quality improvement that would result from the targeted SO₂ and NO_x emission controls in China. Four emission scenarios — the base year 2005, the 2010 Business-As-Usual (BAU) scenario, the 2010 SO₂ control scenario, and the 2010 NO_x control scenario—were constructed and simulated to assess the air quality change from the national control plan. The Fifth-Generation NCAR/Penn State Mesoscale Model (MM5) was applied to generate the meteorological fields for the CMAQ simulations. In this Part I paper, the model performance for the simulated meteorology was evaluated against observations for the base case in terms of temperature, wind speed, wind direction, and precipitation. It is shown that MM5 model gives an overall good performance for these meteorological variables. The generated meteorological fields are acceptable for using in the CMAQ modeling.     

Residual Perchloroethylene in Dry-Cleaned Acetate: The Effect of Pressing and Extent of Inter-Dry-Cleaner Variability

ABSTRACT

Measurements of residual perchloroethylene (PCE), a dry-cleaning solvent associated with human health effects, were made in dry-cleaned acetate cloth to enable improved characterizations of both occupational and environmental exposure. A limited sample size (25 acetate cloths) was used to explore the extent of inter-dry-cleaner variability in residual PCE and to characterize the effect of the pressing operation on residual PCE. A new method, which uses carbon-disulfide as the direct extracting agent, proved effective in the analysis of residual PCE, with a recovery-efficiency ≈ 75%. Inter-dry-cleaner variability of residual PCE, although marginally statistically significant, was relatively low, showing only a fourfold range compared to a 5-order-of-magnitude range obtained from Kawauchi and Nishiyama¹. Pairwise comparison of residual PCE in nonpressed versus pressed acetate samples revealed a statistically significant reduction (p < 0.008), which amounted to a consistent (among dry-cleaners) pressing-related removal efficiency of 75 ± 4%. A preliminary assessment of the source term associated with the pressing operation (mass PCE liberated per kg cloth dry-cleaned, S_PCE ≈ 30 mg/kg) indicates a minor contribution to the average ambient air concentrations within dry-cleaning establishments.     

Monitoring of environmental contaminants in raw bovine milk and estimates of dietary intakes of children in South Korea

Persistent organic pollutants (POPs) are ubiquitous residual contaminants in the environment and in the food chain. Milk is an important matrix for monitoring POP contamination. This study determined the concentrations of POPs including polybrominated diphenyl ethers (PBDEs), hexachlorobenzene (HCB), polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), and dioxin-like polychlorinated biphenyls (DL-PCBs) in raw bovine milk, and the data was used to estimate dietary intakes in South Korea. The average concentrations of PBDEs, HCB, PCDD/Fs, and DL-PCBs in raw milk were 0.29 ng g⁻¹ fat, 0.50 ng g⁻¹ fat, 0.27 pg TEQ g⁻¹ fat, and 0.33 pg TEQ g⁻¹ fat, respectively. No significant relationship was found between the concentrations of analytes and the regions sampled. The dietary intakes of PBDEs from the consumption of milk was calculated to be 0.26, 0.10, and 0.05 ng kg⁻¹ bw d⁻¹ for the group of ages 0–6, 7–12, and 13–19, respectively. The dietary intakes of HCB was calculated to be 0.44, 0.16, and 0.09 ng kg⁻¹ bw d⁻¹ for the group of ages 0–6, 7–12, and 13–19, respectively. The dietary intakes of PCDD/Fs and DL-PCBs was calculated to be 0.78, 0.29, and 0.16 pg TEQ kg⁻¹ bw d⁻¹ for the group of ages 0–6, 7–12, and 13–19, respectively. These results indicated that the residual levels of PBDEs, HCB, PCDD/Fs, and DL-PCBs in raw bovine milk were within safe levels.     

Highly siliceous MCM-48 from rice husk ash for CO2 adsorption

Mesoporous MCM-48 silica was synthesized using a cationic-neutral surfactant mixture as the structure-directing template and rice husk ash (RHA) as the silica source. The MCM-48 samples were characterized by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), N₂ physisorption and SEM. X-ray diffraction pattern of the resulting MCM-48 revealed typical pattern of cubic Ia3d mesophase. BET results showed the MCM-48 to have a surface area of 1024 m²/g and FT-IR revealed a silanol functional group at about 3460 cm⁻¹. Breakthrough experiments in the presence of MCM-48 were also carried out to test the material's CO₂ adsorption capacity. The breakthrough time for CO₂ was found to decrease as the temperature increased from 298 K to 348 K. The steep slopes observed shows the CO₂ adsorption occurred very quickly, with only a minimal mass transfer effect and very fast kinetics. In addition, amine grafted MCM-48, APTS-MCM-48 (RHA), was prepared with the 3-aminopropyltriethoxysilane (APTS) to investigate the effect of amine functional group in CO₂ separation. An order of magnitude higher CO₂ adsorption capacity was obtained in the presence of APTS-MCM-48 (RHA) compared to that with MCM-48 (RHA). These results suggest that MCM-48 synthesized from rice husk ash could be usefully applied for CO₂ removal.     

Waste electrical and electronic equipment (WEEE) management in Korea: generation, collection, and recycling systems

In Korea, generation of waste electrical and electronic equipment (WEEE), or electronic waste (e-waste), has rapidly increased in recent years. The management of WEEE has become a major issue of concern for solid waste communities due to the volumes of waste being generated and the potential environmental impacts associated with the toxic chemicals found in most electronic devices. Special attention must be paid when dealing with WEEE because of toxic materials that it contains (e.g., heavy metals, polybrominated diphenyl ethers, phthalates, and polyvinyl chloride). If managed improperly, the disposal of WEEE can adversely affect the environment and human health. Environmental regulatory agencies; electronic equipment manufacturers, retailers, and recyclers; environmental nongovernmental organizations; and many others are much interested in updated statistics with regard to how much WEEE is generated, stored, recycled, and disposed of. In Korea, an extended producer responsibility policy was introduced in 2003 not only to reduce the amount of electronic products requiring disposal, but also to promote resource recovery from WEEE; the policy currently applies to a total of ten electrical and electronic product categories. This article presents an overview of the current recycling practices and management of electrical and electronic waste in Korea. Specifically, the generation rates, recycling systems and processes, and recent regulations of WEEE are discussed. We estimated that 1 263 000 refrigerators, 701 000 washing machines, 1 181 000 televisions, and 109 000 airconditioning units were retired and handled by the WEEE management system in 2006. More than 40% of the products were collected and recycled by producers. Four major producers’ recycling centers and other WEEE recycling facilities are currently in operation, and these process a large faction of WEEE for the recovery of valuable materials. Much attention should still be paid to pollution prevention and resource conservation with respect to WEEE. Several suggestions are made in order to deal with electronic waste management problems effectively and to prevent potential impacts.     

A numerical simulation model of cyclic hardening behavior of AC4C-T6 for LNG cargo pump using finite element analysis

This paper is concerned with the evaluation of cyclic hardening models within the stress–strain behavior of aluminum alloy AC4C-T6 that can be used to LNG cargo pump operating in cryogenic temperature. To insure the strength assessment of LNG cargo pump, material model of cyclic hardening and plasticity for aluminum alloy AC4C-T6 is investigated through FEA (Finite Element Analysis) with various hardening options including linear and non-linear hardening, isotropic and kinematic hardening, and combined hardening model. Monotonic tensile and cyclic tensile experiments for AC4C-T6 alloy were performed at room temperature and temperature of ?165 °C. Parameters of each hardening model are obtained from the experimental data; thus five hardening models are numerically simulated thereafter. Appropriate hardening models which describe the cyclic stress–strain relationship are investigated through the simulations of cyclic hardening behavior by FEA. In order to verify the predicted behavior of cyclic hardening obtained by FEA, the results of FEA and those measured by experiments are compared.     

典型城市臭氧污染源贡献及控制策略费效评估

东莞是珠三角O_3污染最严重的城市,使用RSM/CMAQ(曲面响应模型)法分析了珠三角区域人为排放的NO_x和VOCs对东莞市O_3浓度变化源贡献.2014基准年分析结果表明,扣除模型域外区域传输及天然源排放对O_3本底浓度贡献(41.00%)后,东莞本地VOCs排放对O_3贡献最大(18.50%),珠三角区域NO_x减排率13%时可持续降低东莞市O_3浓度.进一步使用ABa CAS-SE(空气污染控制成本效益与达标评估系统)对2017、2020、2025东莞市3个未来年O_3污染控制情景进行了费效评估.评估结果显示,NO_x和VOCs控制比例相对较低的2017年控制情景人体健康效益/区域控制成本比约为1.1;而控制比例相对较高的2025年东莞O_3达标情景效益成本比仅为0.1.这说明,在高减排率情景下,以末端治理为主的控制措施经济可行性较差,需综合采取产业/能源结构调整、清洁生产等措施实现NO_x和VOCs的大比例减排,实现东莞O_3的稳定达标.今后将进一步研究NO_x和VOCs减排对PM_(2.5)环境浓度及健康效益影响,开展多目标污染物协同控制费效评估.