Fluctuations of the red tide flagellates Chattonella spp. (Raphidophyceae) and the algicidal bacterium Cytophaga sp. in the Seto Inland Sea, Japan

A marine algicidal gliding bacterium Cytophaga sp. strain J18/M01 was isolated in 1990 from a station in northern Harima-Nada, the Seto Inland Sea, Japan, using the harmful red tide alga Chattonella antiqua (Hada) Ono as a susceptible organism. The bacterium can prey upon various species of microalgae. Temporal fluctuations of this bacterium and Chattonella spp. [C. antiqua and C. marina (Subrahmanyan) Hara et Chihara] were investigated weekly at the above station in the summer of 1997 and 1998, using immunofluorescence assay employing highly specific polyclonal antibodies for the bacterium. In the summer of 1997, the cell density of Chattonella spp. showed a maximum value (70 cells ml⁻¹) on 8 July, and decreased thereafter. The bacterium Cytophaga sp. J18/M01 was commonly detected around a few hundreds of cells per milliliter or less. The number of Cytophaga sp. J18/M01 increased after the peak of Chattonella spp., and the maximum cell number of the bacterium was 1350 ml⁻¹. This algicidal bacterium also followed the changes of total amounts of microalgal biomass (chlorophyll a+pheophytin) when Chattonella spp. were absent. In the summer of 1998, Chattonella spp. were relatively less abundant (maximum 21 cells ml⁻¹), and the algicidal bacterium Cytophaga sp. J18/M01 showed a close relationship with the change of total microalgal biomass. The present study suggests that the algicidal bacterium Cytophaga sp. J18/M01 preyed upon, not only harmful red tide microalgae, but also other common microalgae such as diatoms, and the bacterium presumably plays an important role in regulating microalgal biomass in natural marine environments. Received: 20 April 2000 / Accepted: 1 December 2000     

Delignification of disposable wooden chopsticks waste for fermentative hydrogen production by an enriched culture from a hot spring

Hydrogen(H2) production from lignocellulosic materials may be enhanced by removing lignin and increasing the porosity of the material prior to enzymatic hydrolysis. Alkaline pretreatment conditions,used to delignify disposable wooden chopsticks(DWC) waste, were investigated. The effects of NaOH concentration, temperature and retention time were examined and it was found that retention time had no effect on lignin removal or carbohydrate released in enzymatic hydrolysate. The highest percentage of lignin removal(41%) was obtained with 2% NaOH at 100℃, correlated with the highest carbohydrate released(67 mg/gpretreated DWC) in the hydrolysate. An enriched culture from a hot spring was used as inoculum for fermentative H2 production, and its optimum initial pH and temperature were determined to be 7.0 and 50℃, respectively. Furthermore, enzymatic hydrolysate from pretreated DWC was successfully demonstrated as a substrate for fermentative H2 production by the enriched culture. The maximum H2 yield and production rate were achieved at 195 mL H2/g total sugarsconsumedand 116 mL H2/(L·day), respectively.     

“Seed bank” of coastal planktonic diatoms in bottom sediments of Hiroshima Bay, Seto Inland Sea, Japan

Abundance and temporal distribution of viable (able to germinate) resting stage cells of planktonic diatoms in bottom sediments have been investigated almost monthly during 1989 to 1992 in Hiroshima Bay, western part of Seto Inland Sea, Japan. The abundance of viable resting stages in bottom sediments was enumerated with the extinction dilution method (most probable number method, MPN). In bottom sediments of Hiroshima Bay, dominantly distributed species and/ or genera of the diatom resting stages were Skeletonema costatum, Chaetoceros spp. and Thalassiosira spp. Viable resting stages of these diatoms were densely distributed on the orders of 10³ to 10⁶ (MPN g⁻¹ wet sediments), and persisted in bottom sediments throughout the investigation period. Conversely, vegetative cells of these diatoms fluctuated remarkably in the water column and disappeared sporadically. Survival of the resting stages in a collected sediment sample was also determined with the MPN method, at different storage temperatures (5, 10, 15, 20, 25 °C). The survival test demonstrated that the diatom resting stages could survive in the dark for several months or years in sediments. Resting stages survived longer at the lower storage temperature, and the order of longevity was consistent within three diatoms (Chaetoceros spp. > Thalassiosira spp. > S. costatum) at each storage temperature. The present study suggests that these diatom resting stages in the coastal bottom sediments could serve as a “seed bank”, analogous to those of terrestrial plants. The seed bank would ensure the survival of diatoms within highly fluctuating coastal environments, while it would also be the source of sporadic and autochthonous diatom blooms in coastal waters. Received: 29 November 1996 / Accepted: 16 December 1996     

Antiviral Activities of Hibiscus sabdariffa L. Tea Extract Against Human Influenza A Virus Rely Largely on Acidic pH but Partially on a Low-pH-Independent Mechanism

Food and Environmental Virology - Influenza A virus (IAV) infection is perennially one of the leading causes of death worldwide. Effective therapy and vaccination are needed to control viral...     

Response surface method for modeling the removal of carbon dioxide from a simulated gas using water absorption enhanced with a liquid-film-forming device

This paper presents the results from using a physical absorption process to absorb gaseous CO_2mixed with N_2using water by producing tiny bubbles via a liquid-film-forming device(LFFD)that improves the solubility of CO_2in water.The influence of various parameters—pressure,initial CO_2concentration,gas-to-liquid ratios,and temperature—on the CO_2removal efficiency and its absorption rate in water were investigated and estimated thoroughly by statistical polynomial models obtained by the utilization of the response surface method(RSM)with a central composite design(CCD).Based on the analysis,a high efficiency of CO_2capture can be reached in conditions such as low pressure,high CO_2concentration at the inlet,low gas/liquid ratio,and low temperature.For instance,the highest removal efficiency in the RSM–CCD experimental matrix of nearly 80%occurred for run number 20,which was conducted at 0.30 MPa,CO_2concentration of 35%,gas/liquid ratio of 0.71,and temperature of 15°C.Furthermore,the coefficients of determination,R~2,were 0.996 for the removal rate and 0.982 for the absorption rate,implying that the predicted values computed by the constructed models correlate strongly and fit well with the experimental values.The results obtained provide essential information for implementing this method properly and effectively and contribute a promising approach to the problem of CO_2capture in air pollution treatment.     

Inactivation effect of pressurized carbon dioxide on bacteriophage Qβ and ΦX174 as a novel disinfectant for water treatment

The inactivation effects of pressurized CO2 against bacteriophage Qβ and ΦX174 were investigated under the pressure of 0.3–0.9 MPa, initial concentration of 107–109PFU/mL, and temperature of17.8°C–27.2°C. The optimum conditions were found to be 0.7 MPa and an exposure time of 25 min. Under identical treatment conditions, a greater than 3.3-log reduction in bacteriophage Qβ was achieved by CO2, while a nearly 3.0 log reduction was observed for phage ΦX174. The viricidal effects of N2O(an inactivation gas with similar characteristics to CO2), normal acid(HCl), and CO2 treatment with phosphate buffered saline affirmed the chemical nature of CO2 treatment. The pumping cycle, depressurization rate, and release of intracellular substances caused by CO2 were its viricidal mechanisms. The results indicate that CO2 has the potential for use as a disinfectant without forming disinfection by-products.     

Development of waste gasification and gas reforming system for municipal solid waste (MSW)

To achieve both high-efficiency power generation and high detoxification performance, advanced-type waste power generation plants such as pyrolysis and gas reforming plants are suggested. Further surveys on actual operational data of these plants are required in terms of reliability of the system when it is introduced to waste disposal sites. To verify the technical effectiveness of advanced-type waste power generation using the pyrolysis and gas reforming method, we evaluated 10?tons/day of municipal solid wastes (MSW) treated in a demonstration plant. A demonstration test was conducted over 100?days including 35?consecutive days of operation treating MSWs. The test results show high recycling performance and harmless nature of the plant which proves it to be an excellent waste recycling system. Major test results are as follows: (1) stabilization of waste treatment is possible with the wastes of various qualities, (2) clean gas is produced from the waste whose energy recovery ratio is approximately 40?%. (3) 99.3?% weight % of dried waste are recovered as valuable materials such as clean gas, char and metal, (4) total amount of dioxin emission to the outside of the plant is very small, down to 0.0051–0.018?μg?TEQ per ton waste.     

Toxicity test using medaka (Oryzias latipes) early fry and concentrated sample water as an index of aquatic habitat condition

The aim of the present study was to show a relationship between toxicity of 100-fold concentrated water and aquatic habitat conditions. Environmental waters are 100-fold concentrated with solid-phase extraction. Medaka early fry was exposed in these waters for 48 h. The number of death and disorder was counted at 1, 2, 3, 6, 12, 24, and 48 h; toxicity was expressed using inverse median effect time and median lethal time (ET (50)(-1), LT (50)(-1)). Average score per taxon (ASPT) for benthic animals and Index of Biotic Integrity (IBI) for fish were applied as indices of aquatic habitat conditions. The results of toxicity test were compared using ASPT and IBI. The different levels of toxicity were detected in the seawater of Japan. At the Husino River area, toxicity cannot be detected. In rivers, high toxicity appeared at urban districts without sewerage. By Spearman coefficient, the relationship between toxicity and high biochemical oxygen demand (BOD) were obtained. BOD household wastewater contains hydrophobic toxic matters; otherwise, seawater in industrial area does not show clear relationship between toxicity and chemical oxygen demand. Gas chromatography to mass spectrometry simultaneous analysis database may give an answer for the source of toxicity, but further test is required. Ratio of clear stream benthic animal sharply decreased over 0.25 of LT (50)(-1) or 0.5 of ET (50)(-1). Tolerant fish becomes dominant over 0.3 of LT (50)(-1) or 0.5-1.0 of ET (50)(-1). By Pearson product-moment correlation coefficient, correlation coefficient between toxicity and ASPT was obtained at -0.773 (ET (50)(-1)) and -0.742 (LT (50)(-1)) at 1 % level of significance with a high negative correlation. Toxicity (LT (50)(-1) ) has strong correlation with the ratio of tolerant species. By Pearson product-moment correlation coefficient, correlation coefficient between toxicity and IBI obtained were -0.155 (ET (50)(-1)) and -0.190 (LT (50)(-1)) at 1 % level of significance and has a low or no correlation between toxicity and IBI. Even with low toxic environmental waters, toxicity test using 100-fold concentrated and medaka early fly could detect acute toxicity. The detected toxicity seemed to limit the inhabiting aquatic species in the water body.     

Load of Heavy Metals in the Airborne Dust Particulates of an Urban City of Central India

The geographical and temporal distribution patterns of airborne dust particulates have been studied in different representative areas of Raipur City. Dust fall samples from different sites were collected and some selected toxic metals namely Cr, Mn, Fe, Ni, Cu, Zn, Sb and Pb in them were determined by AAS. Total annual flux of 11.7, 541.4, 2751.0, 14.2, 9.8, 90.9, 17.6, and 17.7 kg km(-2) y(-1) were measured for Cr, Mn, Fe, Ni, Cu, Zn, Sb, and Pb respectively. The occurrence of metal concentration were generally in the order industrial > heavy traffic > commercial > residential area in Raipur city. The results of analysis show the existence of toxic metal concentration in the order Fe > Mn > Zn > Pb approximately Sb > Ni > Cr > Cu in Raipur city. These large levels of metal pollutants have also been correlated with some meteorological parameters like temperature, relative humidity and wind velocity, and strong positive correlations have been observed.